Cant Find PXE and TFTP



  • Hey all,
    I am a District IT for a School District and we are mass deploying new teacher/lab computers

    I have everything set up and ready to pull a master image to send out to other PC and I am running into a problem. I have my FOG management up and running and I have a image created in Image Management. I have my FOG management on one laptop connected to a Linksys 8 port switch and the master laptop that I want the image from connected also. I have Sysprep the Master Image and booted it to Onboard NIC. It finds the Client IP that I have set up but can not find the PXE and the TFTP times out.

    Anyone got a answer for this problem? Thanks[ATTACH=full]1237[/ATTACH][ATTACH=full]1239[/ATTACH][ATTACH=full]1238[/ATTACH][ATTACH=full]1240[/ATTACH]

    [url="/_imported_xf_attachments/1/1237_1.PNG?:"]1.PNG[/url][url="/_imported_xf_attachments/1/1238_2.PNG?:"]2.PNG[/url][url="/_imported_xf_attachments/1/1239_3.PNG?:"]3.PNG[/url][url="/_imported_xf_attachments/1/1240_4.PNG?:"]4.PNG[/url]


  • Developer



  • If your settings are correct as per Toms suggestion you could try restarting tftpd on the fog server. I’ve found that sometimes cures it. But only if you dhcp configuration is correct first.


  • Moderator

    Could also be your hardware. I have been fighting some TFTP Open Timeout errors on a couple of machines lately and I am trying to find a solution.


  • Senior Developer

    Who’s handling DHCP? FOG or your linksys router?

    Is the Option 66 (boot ip)/Option 67 (boot filename) set correctly? It should be (66 = FOG IP Address/67 = undionly.kpxe)


Log in to reply
 

366
Online

39.3k
Users

11.0k
Topics

104.4k
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.