Cannot get Windows client to connect to FOG server
-
I can’t tell as we don’t manage the switches here. They are managed by our VOIP provider.
-
voip uses tftp
your phones aren’t on a separate vlan? -
We had our own Dell switches replaced a month ago when we witched our phone system to a VOIP provider. The phones are PoE and our old switches were not so they sent us two Cisco PoE swtiches to replace ours with. Those switches route our network traffic as well as the phone but the vendor manages them so I do not know how they are setup nor do I have access to manage them. They may be VLAN’d but I cannot login to the switches to check.
-
i’m sorry, but if you don’t[FONT=arial][COLOR=#262626] have control over your own network, there isn’t anything more i can do for you.[/COLOR][/FONT]
[FONT=arial][COLOR=#262626]tom suspects that the switches are telling your systems where to get their tftp files instead of forwarding the request to the dhcp server.[/COLOR][/FONT] -
I guess I’ll have to scrap this FOG project and go back to using Acronis to apply my sysprepped images then. Thanks for the help.
If anyone has more suggestions I am willing to try them as I am looking for a better imaging method.
-
If you can get control of your network, or request your VoIP provider to verify our suspicions and to work with us, I think managing of imaging beats the need for a VoIP phone to check for a tftp file every boot.
-
would it be feasible to put one of your old dell switches back in place, so that it was between the dhcp server and the client instead of the voip configured switch?
-
[quote=“Tom Elliott, post: 34139, member: 7271”]If you can get control of your network, or request your VoIP provider to verify our suspicions and to work with us, I think managing of imaging beats the need for a VoIP phone to check for a tftp file every boot.[/quote]
Add to this that you can actually set your configuration file on the fog server if they do need this functionality.
-
@junkhacker - I would have to bring down one of our Cisco switches which I cannot do during business hours.
-
[quote=“Tom Elliott, post: 34141, member: 7271”]Add to this that you can actually set your configuration file on the fog server if they do need this functionality.[/quote]
Tom, I do believe the phones need to check for something while booting but not sure exactly what.
-
it’s checking for a configuration file. This configuration file is something cisco is specifically looking for. If ti doesn’t exist it may not boot right, I don’t know, but the good news is is you can add that configuration file to the FOG Server under whatever extra directories you need. Then things would potentially work perfectly in your setup.
Right now, as you’re letting a vendor control how things are setup in your own network you have no control. This is why you’re not getting the files. The switches your using aren’t passing information properly. My guess, as well, is even if you reinstalled 0.32 you’d be running into exactly the same problems because the switches are not passing information properly.
-
Yea I don’t want to make any adjustments to the phone system here as that’s priority #1. I wouldn’t feel comfortable putting the file the phones need onto he FOG server as I’m not too familiar with Linux and troubleshooting that would be near impossible. I don’t think the phone vendor would even let me do that.
Thanks for the help, I appreciate it.
