Clean install Ubuntu 14.04 and fog 1.1.2

[purpleturtle99]

Gentlemen we have lift OFFFFFFFFFF.
I have finally booted to my fog server successfully. In the end it was the line: dhcp-range=10.0.0.10,proxy which I had to change to the ip address of my server.

Soooooo to help others
here is a quick breakdown of my set up and by no means perfect but hey it works
Ububtu 1204 LTS
Fog 1.1.0
Cisco WAG120N switch with DHCP enabled to provide IP address in the same subnet as your server(just in case)
DNSMASQ installed and configured as per link (DNSMASQ doesn’t provided DHCP it inform the client’s computer where to find the fog server)
[url]http://fogproject.org/wiki/index.ph...with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/url]

I had to change the following in the /etc/dnsmasq/ltsp.conf
dhcp-boot=undionly.kpxe,fog,IP.Add.of.yurserver
and
dhcp-range=IP.ADD.OF.yurserver,proxy

Thanks to LifeHacker, Jaymes and Tom Elliott