IPXE issue
-
[quote=“Junkhacker, post: 28386, member: 21583”]try the latest undionly.kpxe, a longer max wait time for DHCP responses has been added and it seems to help a lot[/quote]
Where can i find the latest undionly.kpxe? I’m sort of losing track of all the ones that i have tried.
-
-
If you want to keep on the cutting edge with fog follow this thread. I know it says 0.33 but its a sync to the latest revision.
[url]http://fogproject.org/forum/threads/keep-up-to-date-with-all-the-fog-0-33-updates.10300/[/url]
-
Not working for me…
same error…
Configuring (net0 <MAC ADDRESS>)…Error 0x040ee119
and reboots -
[quote=“sushant jangale, post: 36508, member: 25752”]Not working for me…
same error…
Configuring (net0 <MAC ADDRESS>)…Error 0x040ee119
and reboots[/quote]We need more info.
The switches your working from are setup for STP? Can you disable or enable Portfast/Rapid STP?
-
Hello Tom,
Thanks for your prompt help. I will provide you STP details in few minutes, till i have one more input for you.
We have FOG Server which have 4 1G Ethernet ports and we have created bond0 from ubuntu side so that we will get 4g pipe.
At switch side we have Nexus 2010 switch on which we have configured portchannel of this 4 ports.So do you think we have to disable or enable portfast/Rapid STP on this 4 ports.
Just for your info we have tried replacing below kpxe files, but no luck with it
[B][/B]Thanks,
Sushant -
My switches are not STP
Where do you think should i enable portfast, between fog side and dhcp server???
what do you think problem is, is it time response between DHCP and Client or DHCP and FOG server.???can you give me link to download latest undionly.kpxe???
thanks,
sushant -
HI
i had problem with undionly.kpxe, so i tried Chainloading PXE to iPXE using pxelinux.0
Now i have problem, when i open website , i am getting message “unable to connect to database”I am using fog 1.1.0 installed on ubuntu 14.
-
When you say, “My switches are not STP”, what do you mean? They’re not STP brand, or they’re don’t have STP Enabled?
-
Hi tom,
My switches dont have STP enabled. -
Hi Tom,
Do you have any update on this?
If possible, Can you please share me latest undionly.kpxe file for my scenario. -
The latest undionly files can be downloaded from:
[code]https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp[/code]I don’t have an update because I don’t know exactly what’s wrong. If your switches don’t have STP enabled, then is it the delay between the request and acknowledgement of the DHCP address? How long does it take for your system, or systems, to receive a DHCP address?
-
Hi Tom,
Thanks for your help,
My setup is working now, i had changed the ports through which machines were booting.
Now it is working.thanks and regards,
sushant j
