4k Advanced Format Drives
-
You shouldn’t need to do that either.
Try not using Single Disk Resizable. Make sure it’s Multipart - Single or All disk.
-
One more question,
Have you recreated the image system?
Meaning after you’ve wiped the drive, make sure you reinstall the system. If the BIOS allows you to place the system into “legacy” or MBR mode, make sure that’s set first. Then Remake your “master” image from the system. Then try uploading. It can’t deploy because the MBR doesn’t (technically) exist if what I’m thinking is correct.
-
not sure on reefcrazed’s issue, but if partcat is having bsod after using “single disk resizable” image, it’s because resizing the disk messes up with the data the BCD file uses to find the boot info. to create a “master” image using “single disk resizeable” you have to replace the BCD of with a generalized version, which windows will rebuild on reboot just if you syspreped. if you replace the BCD file with this file, your computer should boot.
[url=“/_imported_xf_attachments/0/542_BCD.zip?:”]BCD.zip[/url]
-
Junkhacker,
Do you know where the location of the BCD key’s go?
I can possibly add it as a function of the init to replace the BCD automagically if it’s as simple as copy paste.
-
the windows 7 default setup creates a 100mb or so system recovery drive that’s hidden when actually booted into windows. it’s in this first partition of the drive in the directory “boot” directory. the file itself is a pain to edit, but just replacing it with the one I attached works, it is the one generated when you sysprep a machine, before you reboot and it reconfigures. if you are unfamiliar with editing BCD files and want to look inside it, i recommend the program BOOTICE.
-
I have mine resolved. I ended up nuking the original image and uploading a new sysprep’d image. I think my problem was the original image had some crap dell partioning, seems like I saw the 100mb partition was more like 300mb. I blew it all off, uploaded a new one and it is working. The only weird thing now is when I deploy the first time it errors on creating both partitions on a clean drive, but if I assign the task again it works every single time.
Also I cannot seem to get multitask to work. The machines just sit there in a waiting period but all of them are up, I tried it with just two also and they never start.
-
just for a test, i pulled an Optiplex 9020 off the shelf, pulled an image off of it (multipart single - not resizeable ), and imaged it back to the machine. worked fine.
-
Yeah, mine is working now, like my previous post. Not sure about the weird error, I may try not boot and nuking the next one off the shelf, just image right over it.
Anyone have success with multicast?
-
Reefcrazed,
What revision of FOG 0.33b are you using?
I know of issues a while back, but I thought I fixed them all. Can you try updating to r1210 and see if you still have the multicast issues?
-
Can you guys post the BIOS settings, FOG version, Kernel Version, and Image Settings that you guys are using, I am still having issues and it will be very helpful. Also, I notice you refer to 9020 and I want to know if you refer to the 9020 desktop or the 9020 AIO?
-
desktop. you said it “messed up the OS” what exactly did it do. were you getting BSOD screens on reboot? 0xc00000f or 0xc00000e specifically?
-
His error was:
Status: 0xc000000e -
yep, thats almost certainly the BCD
-
Tom, how exactly can you find the minor revision you are using? I cannot seem to locate it.
-
I fixed it by booting from the OS DVD then repair but this was a deployed image. What I want to know is what you guys did to get a successful image upload/download, you know BIOS SATA AHCI, RAID, etc. all the specs.
-
reefcrazed: if you installed by svn you navigate to the folder you downloaded it to and run “svn version”
partcat: if you replace the system’s BCD file before you pull the image (use the copy attached to my earlier post), the system will boot. assuming you have all the drivers and it’s a relatively normal install. the BCD file is located on the hidden first partition that’s about 100 mb. you’ll most likely need to use a live boot disk to do the file replacement.
replace the file, then pull the image. do not let the computer boot into windows between those two steps. -
Now that you have a bootable system push that for the upload and everything should work.
EDIT AS MY CELLPHONE DECIDED TO MAKE ITS OWN WORDS UP.
-
partcat: my steps are if you wish to use single disk resizable, if you do not use a resizable option you do not need to take those extra steps
-
root@MOB-LIN02:/test/fog_0.33b# svn info
Path: .
URL: [url]https://svn.code.sf.net/p/freeghost/code/trunk[/url]
Repository Root: [url]https://svn.code.sf.net/p/freeghost/code[/url]
Repository UUID: 71f96598-fa45-0410-b640-bcd6f8691b32
Revision: 1190
Node Kind: directory
Schedule: normal
Last Changed Author: masterzune
Last Changed Rev: 1190
Last Changed Date: 2014-02-04 10:08:42 -0600 (Tue, 04 Feb 2014) -
I’m going to look into getting this bcd on the init.gz and interject it in it’s proper location from the init.gz before the image upload even starts. This way, theoretically, we’ll have a working single disk resizable even for non-sysprepped systems.
