Latest FOG 0.33b
-
I’ve made the changes you suggested, and made all cut -d"|" -f{field number} to awk -F"|" ‘{print $<FIELD>}’ where appropriate. Once built, I’ll update the init.gz on svn.
Thanks and hope you’ll enjoy the updates.
-
r1089 released.
Contains the fixes suggested and includes the, now, redirect elements of partclone for the 64 bit binaries.
Updates to Service.class.php to work out UserCleanup service based on class file created.
-
Going to pull down and test. Ur the man Tom ;):)
-
Hi Tom and thank you again
I can confirm that the logical partitions are backed, the problem is in the restore.
When I made a backup of my disk, the backup folder contained:
-rwxrwxrwx 1 root root 32256 ene 10 13:51 d1.mbr*
-rwxrwxrwx 1 root root 20 ene 10 13:51 d1p1.img*
-rwxrwxrwx 1 root root 1208926132 ene 10 13:54 d1p2.img*
-rwxrwxrwx 1 root root 20 ene 10 13:54 d1p3.img*
-rwxrwxrwx 1 root root 20 ene 10 13:55 d1p5.img*
-rwxrwxrwx 1 root root 7934933 ene 10 13:55 d1p6.img*So the partitions 5 and 6 (both logical) were present (5 is swap and 6 is the /home) but when I restored the backup, only partitions 1, 2 and 3 were restored (3 is the extended).
Is there any way to give you more information?
-
I’ll have to take a look to have it image each part found, rather than limiting the number actually restored. It may take a little bit.
-
Testing capone on 1089, not working, dies early on. Other things work, strange thing is it fails the same if I replace fog.capone with the one I posted earlier. Will investigate further tomorrow.
-
Hey Tom I have been having nothing but trouble with fog and hyper - V I finally got the machine to regester to the fog data base but now when I go to the Web gui to look at the computer I get this error
FOG DEBUG HOST: Database load failed: ID 0, error: operation field not set: ID
-
Troye,
Have you edited the Host.class.php file? Did you remove or change the line:
[php]‘id’ => ‘hostID’,[/php]It should be line 11 in the file.
-
No I think I figured out why I dropped the database and reinstalled fog. then when I re-added my image on the machine i notice I was using a lower case w and not a Cap W.
-
gotcha, so did that help out?
-
the machine is imaging now I will test some more and let you know.
-
Question should the host name changer and joining a domain work by default?
-
I don’t know what you mean by that.
They should work if you’ve enabled them. If they’re disabled globally AND/OR disabled on the host, then no they won’t work.
-
r1090 fixes an issue in the ImagingLog where it kept creating a new entry rather than updating the original one in the list. Should also fix multicast from going to port 666 no matter what. It uses the multicast_start_port from the globalsettings now. (Change in FOG Configuration->FOG Settings->FOG_UDPCAST_STARTINGPORT
r1091 fixes an issue where I was a complete imbecile and for got to remove some of my testing parts. It was saying “Failed to update imaging log.” This should be fixed now.
-
Hi Tom seeing that we are using partclone now in 0.33b is it possible to image a mac. Not a great problem for me because we have only a few was just wondering. And looking to the future.
-
r1095 released. Fixes space in the UDP part as stated in the BUGS forum.
-
MAC’s are supported as I’ve added the binaries to the init.gz, though I think this will have to be manual for the time being. I’ll have to add the MAC os to the OS Listing and have it translated to allow for hfs imaging.
-
Thanks for the update tom.
-
Great Work Tom, will be spinning up a new .33 vm in a min
-
Capone problem solved, you had a missing quote in your fog.capone, corrected one attached.
Don’t forget to chmod 755 it once you’ve copied into /binNow to work on some of the other capone stuff!
[url=“/_imported_xf_attachments/0/479_fog.capone.zip?:”]fog.capone.zip[/url]
