Latest FOG 0.33b
-
[quote=“Tom Elliott, post: 19909, member: 7271”]I run CentOS 6.4.[/quote]
I cannot get it to install on a fresh copy of 6.4… It gets down to checking package htmldoc and fails it has several other warning further up but seems to get past them… attached is my full install log.
[url=“/_imported_xf_attachments/0/442_foglog.txt?:”]foglog.txt[/url]
-
Make sure you install the elrepo repository for htmldoc.
-
[quote=“Tom Elliott, post: 19915, member: 7271”]Make sure you install the elrepo repository for htmldoc.[/quote]
The noob in me says… “Wat” but i’ll google and see what its all about.
so i followed the direction here [url]http://elrepo.org/tiki/tiki-index.php[/url] while under root. didn’t seem to do anything for the public key import but the RPM install made noise but the installer still failed.
[CODE][fogtech@CentFog ~]$ su
Password:
[root@CentFog fogtech]# cd fog_0.33b
[root@CentFog fog_0.33b]# cd bin
[root@CentFog bin]# ./installfog.sh..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…###########################################
FOG
Free Computer Imaging Solution
http://www.fogproject.org/
Developers:
Chuck Syperski
Jian Zhang
Peter Gilchrist
GNU GPL Version 3
###########################################
Version: 0.33BETA Installer/Updater
What version of Linux would you like to run the installtion for?
1) Redhat Based Linux (Redhat, Fedora, CentOS) 2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)
Choice: [1]1
Staring Redhat / Fedora / CentOS Installation.
FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.* Storage Node: (Choice S) This install mode will only install the software required to make this server act as a node in a storage group
More information:
http://www.fogproject.org/wiki/index.php?title=InstallationModesWhat type of installation would you like to do? [N]
What is the IP address to be used by this FOG Server? [172.16.43.134]10.10.10.10
Would you like to setup a router address for the DHCP server? [Y/n] n
Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n] n
Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]nWould you like to use the FOG server for DHCP service? [Y/n] y
This version of FOG has internationalization support, would
you like to install the additional language packs? [y/N] n#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.It is not recommended that you install this on a production system
as this script modifies many of your system settings.This script should be run by the root user on Fedora, or with sudo on Ubuntu.
Here are the settings FOG will use:
Base Linux: Redhat
Detected Linux Distribution: CentOS
Installation Type: Normal Server
Server IP Address: 10.10.10.10
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0Are you sure you wish to continue (Y/N) y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.-
Packages to be installed: httpd php php-cli php-common php-gd php-mysql mysql mysql-server dhcp tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ htmldoc perl perl-Crypt-PasswdMD5 lftp clamav
-
Skipping package: httpd (Already installed)
-
Skipping package: php (Already installed)
-
Skipping package: php-cli (Already installed)
-
Skipping package: php-common (Already installed)
-
Skipping package: php-gd (Already installed)
-
Skipping package: php-mysql (Already installed)
-
Skipping package: mysql (Already installed)
-
Skipping package: mysql-server (Already installed)
-
Skipping package: dhcp (Already installed)
-
Skipping package: tftp-server (Already installed)
-
Skipping package: nfs-utils (Already installed)
-
Skipping package: vsftpd (Already installed)
-
Skipping package: net-tools (Already installed)
-
Skipping package: wget (Already installed)
-
Skipping package: xinetd (Already installed)
-
Skipping package: tar (Already installed)
-
Skipping package: gzip (Already installed)
-
Skipping package: make (Already installed)
-
Skipping package: m4 (Already installed)
-
Skipping package: gcc (Already installed)
-
Skipping package: gcc-c++ (Already installed)
-
Installing package: htmldoc
Error: Nothing to do -
Skipping package: perl (Already installed)
-
Skipping package: perl-Crypt-PasswdMD5 (Already installed)
-
Skipping package: lftp (Already installed)
-
Installing package: clamav
Error: Nothing to do
Confirming package installation.
- Checking package: httpd…OK
- Checking package: php…OK
- Checking package: php-cli…OK
- Checking package: php-common…OK
- Checking package: php-gd…OK
- Checking package: php-mysql…OK
- Checking package: mysql…OK
- Checking package: mysql-server…OK
- Checking package: dhcp…OK
- Checking package: tftp-server…OK
- Checking package: nfs-utils…OK
- Checking package: vsftpd…OK
- Checking package: net-tools…OK
- Checking package: wget…OK
- Checking package: xinetd…OK
- Checking package: tar…OK
- Checking package: gzip…OK
- Checking package: make…OK
- Checking package: m4…OK
- Checking package: gcc…OK
- Checking package: gcc-c++…OK
- Checking package: htmldoc…Failed!
[/CODE]
-
-
it is a repository for HTMLdoc hosted and distributed by the Elrepo group.
alternatively, there are posts about the problem you are experiencing, pertaining specifically to CentOS, you can find SOME documentation (not much, it would be nice if someone familiar in CentOS would do a write up of full installation for noobs like we have with Ubuntu) here on the forums.
this works for CentOs 6.2 should work for 6.4 as well, this uses RPMforge instead of elrepo.
[LIST]
[]wget [url]http://pkgs.repoforge.org/rpmforge-release/[/url][URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm[/URL]
[]rpm -i [URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm[/URL]
[*]yum install htmldoc
[/LIST] -
[quote=“Jaymes Driver, post: 19917, member: 3582”]it is a repository for HTMLdoc hosted and distributed by the Elrepo group.
alternatively, there are posts about the problem you are experiencing, pertaining specifically to CentOS, you can find SOME documentation (not much, it would be nice if someone familiar in CentOS would do a write up of full installation for noobs like we have with Ubuntu) here on the forums.
this works for CentOs 6.2 should work for 6.4 as well, this uses RPMforge instead of elrepo.
[LIST]
[]wget [url]http://pkgs.repoforge.org/rpmforge-release/[/url][URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm[/URL]
[]rpm -i [URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’]rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm[/URL]
[*]yum install htmldoc
[/LIST]
[/quote]
thank you for the reply. The middle command did not work but the first and last did and it appears to be downloaded and running but i am still getting errors… the DHCP service isn’t starting.
[CODE][root@CentFog usr]# cd /home/fogtech/fog_0.33b/bin
[root@CentFog bin]# ls
installfog.sh
[root@CentFog bin]# ./installfog.sh..#######:. ..,#,.. .::##::.
.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…###########################################
FOG
Free Computer Imaging Solution
http://www.fogproject.org/
Developers:
Chuck Syperski
Jian Zhang
Peter Gilchrist
GNU GPL Version 3
###########################################
Version: 0.33BETA Installer/Updater
What version of Linux would you like to run the installtion for?
1) Redhat Based Linux (Redhat, Fedora, CentOS) 2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)
Choice: [1]1
Staring Redhat / Fedora / CentOS Installation.
FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.* Storage Node: (Choice S) This install mode will only install the software required to make this server act as a node in a storage group
More information:
http://www.fogproject.org/wiki/index.php?title=InstallationModesWhat type of installation would you like to do? [N]
What is the IP address to be used by this FOG Server? [172.16.43.134]10.10.10.10
Would you like to setup a router address for the DHCP server? [Y/n] b
Invalid input, please try again.Would you like to setup a router address for the DHCP server? [Y/n] n
Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n] n
Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]nWould you like to use the FOG server for DHCP service? [Y/n] y
This version of FOG has internationalization support, would
you like to install the additional language packs? [y/N] n#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.It is not recommended that you install this on a production system
as this script modifies many of your system settings.This script should be run by the root user on Fedora, or with sudo on Ubuntu.
Here are the settings FOG will use:
Base Linux: Redhat
Detected Linux Distribution: CentOS
Installation Type: Normal Server
Server IP Address: 10.10.10.10
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0Are you sure you wish to continue (Y/N) y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.-
Packages to be installed: httpd php php-cli php-common php-gd php-mysql mysql mysql-server dhcp tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ htmldoc perl perl-Crypt-PasswdMD5 lftp clamav
-
Skipping package: httpd (Already installed)
-
Skipping package: php (Already installed)
-
Skipping package: php-cli (Already installed)
-
Skipping package: php-common (Already installed)
-
Skipping package: php-gd (Already installed)
-
Skipping package: php-mysql (Already installed)
-
Skipping package: mysql (Already installed)
-
Skipping package: mysql-server (Already installed)
-
Skipping package: dhcp (Already installed)
-
Skipping package: tftp-server (Already installed)
-
Skipping package: nfs-utils (Already installed)
-
Skipping package: vsftpd (Already installed)
-
Skipping package: net-tools (Already installed)
-
Skipping package: wget (Already installed)
-
Skipping package: xinetd (Already installed)
-
Skipping package: tar (Already installed)
-
Skipping package: gzip (Already installed)
-
Skipping package: make (Already installed)
-
Skipping package: m4 (Already installed)
-
Skipping package: gcc (Already installed)
-
Skipping package: gcc-c++ (Already installed)
-
Skipping package: htmldoc (Already installed)
-
Skipping package: perl (Already installed)
-
Skipping package: perl-Crypt-PasswdMD5 (Already installed)
-
Skipping package: lftp (Already installed)
-
Skipping package: clamav (Already installed)
Confirming package installation.
- Checking package: httpd…OK
- Checking package: php…OK
- Checking package: php-cli…OK
- Checking package: php-common…OK
- Checking package: php-gd…OK
- Checking package: php-mysql…OK
- Checking package: mysql…OK
- Checking package: mysql-server…OK
- Checking package: dhcp…OK
- Checking package: tftp-server…OK
- Checking package: nfs-utils…OK
- Checking package: vsftpd…OK
- Checking package: net-tools…OK
- Checking package: wget…OK
- Checking package: xinetd…OK
- Checking package: tar…OK
- Checking package: gzip…OK
- Checking package: make…OK
- Checking package: m4…OK
- Checking package: gcc…OK
- Checking package: gcc-c++…OK
- Checking package: htmldoc…OK
- Checking package: perl…OK
- Checking package: perl-Crypt-PasswdMD5…OK
- Checking package: lftp…OK
- Checking package: clamav…OK
Configuring services.
- Setting up fog user…Exists
- Setting up and starting MySQL…OK
- Backing up user reports…OK
- Setting up and starting Apache Web Server…OK
- Restoring user reports…OK
- Configuring Fresh Clam…OK
- Setting up storage…OK
- Setting up and starting NFS Server…OK
- Setting up and starting DHCP Server…Failed!
[/CODE]
I did manage to update my Ubuntu 13.10 build to .33B and it seems to be working but i cannot click the download and upload arrows on the tasks page i have to click the advanced then pick Upload or Download to create the task. Any ideas why that might be?
-
-
That’s probably because it didn’t recognize the architecture.
You could use
[LIST]
[]wget [URL=‘http://pkgs.repoforge.org/rpmforge-release/’]http://pkgs.repoforge.org/[/URL]htmldoc/htmldoc-1.8.27-2.el6.rf.x86_64.rpm
[]rpm -i htmldoc-1.8.27-2.el6.rf.x86_64[URL=‘http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm’].rpm[/URL]
[*]yum install htmldoc
[/LIST]
or just change the x86_64 to i686 -
using 996
I have input my AD settings in FOG Configuration, FOG System Settings etc.
but when in Host Management and I click to enable AD joining on the host it does not auto populate the fields. is this just me??
thanks -
I noticed that as well, fix will be in tonight.
-
Tom your a star!!
-
Fixed in r997,
Sorry about that.
-
tom how far off do you think we are before we see a full release?
-
Tom was 977 fix for the AD populating as it wasn’t working for me earlier
-
997 is the fix.
-
I’ll look deeper but chances are I need to copy more folders over.
-
Okay, i’ll test 997 again
CheerS -
r998 is out. I’m hoping it fixes the Ajax issues Nathan is experiencing. This contains all changes that my system has on it as well. I don’t remember all of them, but it should work now as I know it works on my system.
-
Awesome Tom, as always your work here is greatly appreciated.
Will be sure to test/feedback to youThanks again
-
ticking the AD box in host management now auto populates the fields
…time to test some deployments
-
where can i download the latest build of .33 i would like to test it out
-
You must use SVN, for more information: [url]http://www.fogproject.org/wiki/index.php/SVN[/url]