Latest FOG 0.33b
-
Hey Tom,
thanks for the great work you do. I installed FoG 0.33b for my projekt at work and have most issus that are describben here in this Forum. I read the you fix all of this issues that i have but tell me please how can i fix it on my FoG?? Do i have to download and replace some files or do i have to do it by myself?
Greetings
Andy -
[quote=“Andy783, post: 24937, member: 23069”]Hey Tom,
thanks for the great work you do. I installed FoG 0.33b for my projekt at work and have most issus that are describben here in this Forum. I read the you fix all of this issues that i have but tell me please how can i fix it on my FoG?? Do i have to download and replace some files or do i have to do it by myself?
Greetings
Andy[/quote]Andy,
I’m a little confused by what you’re asking. You state you’ve installed FOG 0.33b at work, but I’m not quite sure what “errors” you’re having. You said you have most issues that are described in this thread. That’s not really descriptive as I’ve been doing my best to fix the errors/issues that have cropped up.
When you installed FOG 0.33b, how did you install? Did you do it through SVN? Did you do it through a tarball file?
If you did it through SVN, all you need to do to update to the latest revision is cd into the directory containing the folder, usually trunk and run the svn update command:
[code]cd trunk
svn update[/code]If you did it through a tarball, download the latest from my website:
[url]https://mastacontrola.com/fog_0.33b.tar.bz2[/url]. Extract the file and cd into the directory:
[code]wget --no-check-certificate https://mastacontrola.com/fog_0.33b.tar.bz2
tar -xjf fog_0.33b.tar.bz2
cd fog_0.33b[/code]Then re-run the installer:
[code]cd bin
./installfog.sh[/code]It will update your FOG installation.
-
r1418 released.
Set timezone in system.php if it’s not set in php.ini, set’s to UTC if it’s not specified.That’s it.
-
r1419 released.
Fixes Client Updater service so it can be disabled/enabled properly.
-
r1420 released.
Major change for this is Plugins…again.
I’ve removed the need for the run.php file as the initialization of the data should be the same. Right now the file assumes a plugin makes a schema change, but I don’t think there’s more than the two plugins we currently have (Capone and Location). So this revision moves the data necessary from the run.php files of both plugins and adds them directly into the plugin management page.
Also, this revisions adds the “image name” lookup feature to the Host search information. You can now search hosts by what groups they belong to, the image names, host names, serials, etc…
Hopefully all will enjoy.
-
I created a new image after I changed the ssd to port 0 and the mechanical drive to port 1. It restores the ssd but if the mechanical is bigger than the original it skips it. I have not tried a bigger ssd yet.
-
r1421 and 1422 released.
1421:
Changes FOG PXE Settings category to FOG Boot Settings. Fixes a reference to a deleted file (HostMACManager) so it points to the right place, sorry booting was broken for a little bit there. I only just found out.1422:
Just makes sure the reference label is done correctly for the MACAddressAssociation fields. -
Tom,
It looks like fog is looking for the wrong file names for the image of the second drive. Is my config wrong or is this a bug? In the pic you can see that it wants d1p2 and d1p5 but when I created the image it made d2p2 and d2p5.
Thanks
[url=“/_imported_xf_attachments/0/633_IMAG0057.jpg?:”]IMAG0057.jpg[/url]
-
d1 means disk one (the first disk it finds (/dev/sda))
d2 means disk two (the second disk it finds (/dev/sdb))
p# means the partition number’s it recognizes.From the picture you’re showing,
d1.mbr (the mbr backup for disk one.) is correct.
Disk one (from the pic) is only one partition on it: (d1p1)
Disk two has two partitions, /dev/sdb2 and /dev/sdb5 is my guess based on the labels of the image files.
Is this what you’re seeing when you run
[code]fdisk -l[/code] since changing ports? -
Disk two has sdb2 which is extended and sdb5 which is the Ntfs partition. That is correct.
-
I definitely found the error! Thank you erod.
-
The problem was it wasn’t increasing the disk number after the first pull of information.
-
r1423 released.
Should fix the MPA issue. Basically the intDisk variable was set to one, which is expected, but I forgot to add the iterative statement at the end of that loop to increase it when needed. This should now be fixed.
-
It works now. Thanks Tom. There is another problem. When I choose boot from drive from the Ipxe menu it just sits there. It never boots.
-
Is there a way to turn on services when a host is registered?
-
Never mind my error.
-
[quote=“wolfemi, post: 24964, member: 5740”]Is there a way to turn on services when a host is registered?[/quote]
I don’t know what you mean? What services are you referring to? Are you referring to the FOG Client Services (e.g. Printer Manager, Client Updater, User cleanup, Directory Cleaner, etc…)? Or are you referring to the Windows Services (e.g. telnet, Windows Firewall, etc…)? Or are you referring to the FOG Server services (e.g. FOGMulticastManager, FOGImageReplicator, FOGScheduler)?
FOG Client services can be enabled at any point in time, but can only be “enabled” to a host if the host is already registered.
Windows Services are not controlled in anyway by FOG.
FOG Services are controlled on the server regardless of if there’s none or a million hosts registered and can be started/stopped at any point in time.
-
r1424 released.
Fixes some install issues, I hope, with Ubuntu 13.10 and others I assume.
-
r1425 released.
Just add’s an “example” plugin and modifies the PluginManagementPage to include the run.php file if it’s found.
-
[quote=“Tom Elliott, post: 24972, member: 7271”]I don’t know what you mean? What services are you referring to? Are you referring to the FOG Client Services (e.g. Printer Manager, Client Updater, User cleanup, Directory Cleaner, etc…)? [/quote]
I am referring to the Client Services. I have them enabled on the server and enabled on the Fog Client software. But when I register and image a new host they are disabled under that host service settings. It won’t rename, join AD, install snapins or printers. Once I enable it on the host it all goes. Just wondering if I could eliminate the extra step of enabling it on that hosts page?
