Adding Imaged Host to Domain and Renaming
-
2008 R2
-
I have not added netdom to windows 7 and the wiki documentation says this is not required as of FOG 0.28. I use the basic FOG client from 0.32 and Windows 7 professional and it joins our domain.
-
2008 R2 and FOG 0.29 here
-
So If I am using Win 7 and Fog 0.32 I don’t need to use FOGPrep? Just Sysprep and upload image?
Interesting, because that was the first thing I tried but it didn’t work. Will double check everything and try again.
-
Just to clarify where is the AD join information in 0.32? I can see the Join domain after image option when I go to hosts, is there another AD option?
-
I do not use FOGPrep in 0.32/Windows 7. I also do not strictly use sysprep unless I’m trying to solve a windows problem, as FOG can image fine without it if you are using similar hardware for all hosts sharing an image. However, I do not ever use the resizable image type. I always choose Multiple Partitions - Single Disk when I create images for my laptops and desktops that are running Windows 7 and only have 1 disk to image.
There are AD settings in the Other Information -> Fog Settings page. There is a setting on the same page to globally enable the host name changer service globally, but it is a duplicate of the FOG Configuration -> Host Name Changer option. In the FOGClient config on the host, you can also enable/disable the host name changer service.
-
Hi Chad,
I have tried the approach you suggested, no fogprep or sysprep. After imaging the PC it JOINED THE DOMAIN!
Thank you so much for that the only problem I had is the Service didn’t start automatically if I have it as Logon as (the domain fog account).
-
Great. If you plan to use KMS for activation, or use WSUS, you’ll still need to sysprep, but your answer file will not try to rename the pc or join it to a domain. Use a * for the computer name, because you don’t care what sysprep calls it, FOG will rename it. Do not use the unattendjoin section of the answer file, because FOG will join the computer to the domain after it’s renamed.
You need to sysprep /generalize at some point in your image creation process (either audit or oobe mode) for Windows to generate a new CMID for use with KMS and WSUS and possibly other systems. If you use MAK or can hold onto the OEM key, you don’t have to worry about CMID for KMS activation, only if you use WSUS or something else that identifies workstations based on their CMID.
I’m redoing my Windows 7 images this year, trying to work out the duplicate CMID problem I had last year. We are trying to move to KMS for Windows 7, and ADBA for Windows 8 and Office 2013. Seems every time you figure something out, MS changes it.
-
Thanks again for everything!
-
Thanks so much for the info! So helpful! Do I follow the same steps to change the domain of an already registered host without imaging it again?