Windows 11 | 65x HP Z2 Tower G1i | UPDATE -
-
@Tom-Elliott
cloning stops with an error - but the new image is working on the pc’s
it seems some problem with the Database.
Same situation with the next Group of 5 PC
-
@kratkale one special problem
This host is not willing to work witch the host Device entry BNE7N774610407R40 - I removed the host - performed a Full registration - filled out the host Device - same problem again.
Double check the blkid value … ???
-
@kratkale It’s likely looking at UTC time?
-
@kratkale The error I’ll have to look as it might come from the UI side but also ties in with how things occur on the FOS side (different repo.)
The task completed and marked the db, but apparently seems to be doing so in one swoop.
As for why it’s not seeing the same serial, that I don’t know how you’re getting the serial/size of the disks? that’s the same for that specific machine saying that serial doesn’t exist?
I mean the same serial should not exist for different machines. (Plain and simple)
You can boot the issue machine into debug mode (cancel the existing tasking, then redo the same tasking but check the “Debug” checkbox before you submit it.
Then run that same
lsblk -pdno SERIAL,SIZEafter pressing enter and getting dropped into the console to type commands.My guess is the serial for that machine is NOT BNE7n774610407R40, otherwise there’d be huge issues in shipping equipment and inventory management.
-
@Tom-Elliott
no the difference is not one hour - it is something in between -
This post is deleted! -
@Tom-Elliott
clonzilla started
Gained “root” privileges using sudo su
Ran lsblk -pdno => BNE7N774610407R40 identified as the system disk.
Entered into the FOG GUI
An attempt to clone the device results in the following error
Even deleting the PC from the database and adding it again did not solve the problem.
I’m not in the office right now or tomorrow, so I won’t be able to check the debug mode until Monday.
So far, this has happened with exactly one PC (I haven’t tried cloning the other 38 PCs yet). I followed the exact same procedure for the 23 devices I’ve already cloned, and everything works fine on those. This error has only occurred with PC115CAD so far. -
@kratkale the last 0 is an O (ohhhhh) not a 0 (zero)
-
yes - you are right …
-
@kratkale Did changing the serial on the host in question get it imaging to the right drive?
-
@Tom-Elliott
I was for a coffy - when I came back …
-
@kratkale If you update the the latest verison of working-1.6, does this error go away?
-
@Tom-Elliott
This bar is missing in multicast Task
-
@Tom-Elliott
it works the single Cast with PC115CAD - it was tho old 0O problem thanksNo errors with database and so on - like it was in multicast - reported …
fog client will now be installed after cloning - first try -
I’m using a simulation but I’m still seeing percent for mutlicast tasks.
-
Now there is the bar …
Error after multicast session:
Installation of fog client worked
Here the used script:
Still Problem with security token
Reset Encryption Data for PC111CAD
workingTomorrow I’ll reset Encryption Data during the cloning process …
