Issue : EFI Stub: initrd data into pcr 9

[Tom Elliott]

@Erika Can you attempt to use kernel version 6.1.22? 6.1.89 is when we started seeing the pcr 9 value/issue. Some machines seem to just get hung up trying. The message you see isn’t an error in and of itself. Simply the kernel cannot load the next element in the chain. At least that’s my suspicion. I don’t know how to fix this or what’s even causing it direclty yet. Havent’ really had time to go through and figure it all out.

Translate via Google:
Pouvez-vous essayer d’utiliser la version 6.1.22 du noyau ? C’est à partir de la version 6.1.89 que nous avons commencé à voir la valeur/le problème pcr 9. Certaines machines semblent simplement se bloquer en essayant. Le message que vous voyez n’est pas une erreur en soi. Le noyau ne peut tout simplement pas charger l’élément suivant de la chaîne. Du moins, c’est ce que je soupçonne. Je ne sais pas encore comment résoudre ce problème ni même ce qui en est la cause directe. Je n’ai pas vraiment eu le temps de tout examiner et de tout comprendre.

[Erika]

Hi @Tom-Elliott , I tried this version 6.1.22 today , I still have the same problem …

I will try everything on my side, maybe I will find something that will solve,
If you ever find another solution, please let me know.

[rodluz]

@Erika We just released a new experimental kernel that may fix this issue. Can you try updating to version 6.6.69 and let us know if that one works please?

[Erika]

Hi @rodluz

Thank you,

We will try and I will let you know if it works.

see you later

[Erika]

@rodluz @Tom-Elliott

We tried this experimental version and we are still stuck on this passage.
(because good builds have this message but continue with the rest of the install).

What information could I give you that could help?

Bios version :
(différence that we see)

the one at the top :
CLEVO V560TU - Ultra 7 : the build (FOG PXE) it dos’nt works

the bottom one : it works …

hardware incompatibility ?
(Motherboard, network card…)

[Tom Elliott]

@Erika So if the older BIOS appears to work:

BI0S Version 1.07.05
KBC/EC Version 1.09.10
ME FW Version 18.0.5.2133

Then chances are something that was updated firmware wise is causing the problem rather than the kernel. Unsure what we could do to fix this, though if you’re okay with trying kernels still.

Can you try various kernel versions?

I see you may have tried 6.1.22, what about 6.1.89, whatabout older?

If there’s a version that the new bios version works with, that helps lead us to a point that there is something in the Kernel that isn’t working right. It won’t get us closer to fixing the issue entirely but should help us narrow where in the Kernel there is a problem so we can try to figure it out.

[Erika]

@Tom-Elliott

Sorry,

we tried all available versions of fog core ,
and no one managed to build the laptop

we cannot downgrade the bios, risk too much if we fail.

[rodluz]

@Erika I would like to try the newer 6.12 kernel to see if this issue would get resolved. I will have a kernel for you to try later today.

[rodluz]

@Erika I don’t want to release this in the official repo since this is just a testing kernel, so here is the link to the kernel on my forked repo. https://github.com/rluzuriaga/fos/releases/tag/EXP_20250110

You’ll have to manually install it since it isn’t on the official repo. This is how if you’ve never done it before.

1. SSH into your FOG server
2. cd /var/www/fog/service/ipxe
3. mv bzImage bzImage_original #Not necessary but recommended so you can revert if there are any issues
4. wget https://github.com/rluzuriaga/fos/releases/download/EXP_20250110/bzImage
5. chmod 644 bzImage
6. chown fogproject:www-data bzImage # For Debian based servers
   chown fogproject:apache bzImage # For RHEL based servers

[Erika]

@rodluz

thank you I will try today

[Erika]

@rodluz said in Issue : EFI Stub: initrd data into pcr 9:

@Erika I would like to try the newer 6.12 kernel to see if this issue would get resolved. I will have a kernel for you to try later today.

My colleague and I tried this morning,
It doesn’t work.

efi stub: loaded initrd from linux_efi_initrd_media_guid device path
measured initrd data into pcr 9

Does’nt works on this video : (hosted 2 day)
https://streamable.com/dlqhin

When it works normally, it should go to this step as in the video :
https://streamable.com/esg8f0

[Erika]

@rodluz

@Erika said in Issue : EFI Stub: initrd data into pcr 9:

@rodluz said in Issue : EFI Stub: initrd data into pcr 9:

@Erika I would like to try the newer 6.12 kernel to see if this issue would get resolved. I will have a kernel for you to try later today.

My colleague and I tried this morning,
It doesn’t work.

efi stub: loaded initrd from linux_efi_initrd_media_guid device path
measured initrd data into pcr 9

Does’nt works on this video : (hosted 2 day)
https://streamable.com/dlqhin

When it works normally, it should go to this step as in the video :
https://streamable.com/esg8f0