Isolated Network Setup (Stuck in Start PXE over IPv4)

[george1421]

@Enigma said in Isolated Network Setup (Stuck in Start PXE over IPv4):

Hello I’ve DM the traffic cap

Ok that is looking much better I now see the DORA process (Discover, Offer, Request, Ack). BUT there is something missing. When I look at the ethernet header I see the next server being 192.168.107.2 (hopefully is your fog server). The boot file is undionly.kpxe (this is good), but what is missing is the dhcp options 66 and 67. So that is telling me you are missing something in the config file. You are so close to having this work.

Could you post your complete dhcpd.conf config file?

[Enigma]

@george1421 Hello

sure, here you go:

#
# DHCP Server Configuration file.
#   see /usr/share/doc/dhcp*/dhcpd.conf.example
#   see dhcpd.conf(5) man page
#

option space PXE;
option PXE.mtftp-ip    code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16; # RFC4578

use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 192.168.107.200;
authoritative;

subnet 192.168.107.0 netmask 255.255.255.0 {
    option subnet-mask 255.255.255.0;
    range dynamic-bootp 192.168.107.10 192.168.107.254;
    default-lease-time 21600;
    max-lease-time 43200;
    option domain-name-servers 192.168.107.200;
    #option routers x.x.x.x;
 
    class "UEFI-32-1" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
    filename "i386-efi/ipxe.efi";
    }

    class "UEFI-32-2" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
     filename "i386-efi/ipxe.efi";
    }

    class "UEFI-64-1" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
     filename "ipxe.efi";
    }

    class "UEFI-64-2" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
    filename "ipxe.efi";
    }

    class "UEFI-64-3" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
     filename "ipxe.efi";
    }

    class "Legacy" {
    match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
    filename "undionly.kkpxe";
    }

}

[Enigma]

Hello do i have the correct DHCP conf settings?

[Enigma]

@george1421 Hello any ideas?