FOG reports HOST not Registered on Menu with USB network
-
We have three laptops from which we wish to capture images. We can successfully boot to the FOG bootup menu and can deploy images. However, when I do a quick inventory, first time the inventory runs fine. No Errors. I then schedule a task to capture an image for deployment. When the machine boots into the menu again it doesn’t trigger the auto capture but reports that the HOST is not Registered.
This fault is only occurring on machines where there is no built-in NIC, only WIFI. We are using a USB 3.1 NIC adapter.
We can capture images correctly on the other units with the Built-in NIC’s.
Kind regards
Duane -
@dashwell Just play with the settings to see what difference it makes. Can’t give you a clear advice on this as it behaves differently. This is not something FOG has a share in. It’s up to the vendors UEFI implementation.
-
@sebastian-roth Good evening Sebastian. The MAC passthrough is set to system. I have the options of System, Custom or disabled. Which would you recommend.
-
@dashwell Check the UEFI settings for “MAC passthrough” or similar stuff.