Unable to start on fog server
I’m a bit of a beginner and I’m trying to install a fog server and it seemed to work (I have access to the server interface) but couldn’t capture an image.
The computer tells me “>> start PXE over ipv4” then restarts on windows …
I have correctly configured my dhcp with the server IP and the filename.
Am I missing something?
Thanks for your help
@Maxime22 is your fog server at 192.168.1.200?
If so, do you have a cheap / unmanaged / dumb network switch you can install between the building network switch and the PXE booting computer for a test? If this dumb switch solves the problem then we have a place to look.
Thanks for the reply, I’ve used the filename : undionly.kpxe
WIth the hint of @IndustrialTech87 It’s working but I have another problem : It’s loading and I have the error "Either DJCP failed or we were unable to access https://192.168.1.200/go//index.php for connection testing
@Maxime22 Go into BIOS > Advanced Security and change it to Legacy Enabled Secure Boot Disabled. Save and Exit, network boot and it should work.