Unable to start on fog server

[Maxime22]

Hello,

I’m a bit of a beginner and I’m trying to install a fog server and it seemed to work (I have access to the server interface) but couldn’t capture an image.

The computer tells me “>> start PXE over ipv4” then restarts on windows …

I have correctly configured my dhcp with the server IP and the filename.

Am I missing something?

Thanks for your help

[IndustrialTech87]

@Maxime22 Go into BIOS > Advanced Security and change it to Legacy Enabled Secure Boot Disabled. Save and Exit, network boot and it should work.

[Sebastian Roth]

@Maxime22 Beside the good hint by @IndustrialTech87 I might also ask what filename your have configured exactly?

[Maxime22]

Hello,

Thanks for the reply, I’ve used the filename : undionly.kpxe

WIth the hint of @IndustrialTech87 It’s working but I have another problem : It’s loading and I have the error "Either DJCP failed or we were unable to access https://192.168.1.200/go//index.php for connection testing

[george1421]

@Maxime22 is your fog server at 192.168.1.200?

If so, do you have a cheap / unmanaged / dumb network switch you can install between the building network switch and the PXE booting computer for a test? If this dumb switch solves the problem then we have a place to look.