Cant create User - Setting up fogproject user..................................Failed!
-
im installing this on the latest version of Debian (10.1.0). Everything installs up to the point of creating the user and i get the following error (2ed to last line.
This is my first time ruining Linux so you are going to have to excuse me overlooking something stupid.
root@for-server:/home/kelly# cd fog_stable/bin root@for-server:/home/kelly/fog_stable/bin# ./installfog.sh Installing LSB_Release as needed * Attempting to get release information.......................Done systemd +------------------------------------------+ | ..#######:. ..,#,.. .::##::. | |.:###### .:;####:......;#;.. | |...##... ...##;,;##::::.##... | | ,# ...##.....##:::## ..:: | | ## .::###,,##. . ##.::#.:######::.| |...##:::###::....#. .. .#...#. #...#:::. | |..:####:.. ..##......##::## .. # | | # . ...##:,;##;:::#: ... ##.. | | .# . .:;####;::::.##:::;#:.. | | # ..:;###.. | | | +------------------------------------------+ | Free Computer Imaging Solution | +------------------------------------------+ | Credits: http://fogproject.org/Credits | | http://fogproject.org/Credits | | Released under GPL Version 3 | +------------------------------------------+ Version: 1.5.7 Installer/Updater What version of Linux would you like to run the installation for? 1) Redhat Based Linux (Redhat, CentOS, Mageia) 2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu) 3) Arch Linux Choice: [2] Starting Debian based Installation FOG Server installation modes: * Normal Server: (Choice N) This is the typical installation type and will install all FOG components for you on this machine. Pick this option if you are unsure what to pick. * Storage Node: (Choice S) This install mode will only install the software required to make this server act as a node in a storage group More information: http://www.fogproject.org/wiki/index.php?title=InstallationModes What type of installation would you like to do? [N/s (Normal/Storage)] We found the following interfaces on your system: * ens33 - 10.22.228.171/24 Would you like to change the default network interface from ens33? If you are not sure, select No. [y/N] Would you like to setup a router address for the DHCP server? [Y/n] What is the IP address to be used for the router on the DHCP server? [10.22.228.254] Would you like DHCP to handle DNS? [Y/n] What DNS address should DHCP allow? [8.8.8.8] Would you like to use the FOG server for DHCP service? [y/N] This version of FOG has internationalization support, would you like to install the additional language packs? [y/N] *** New option 'hostname' since FOG 1.5.6 *** Would you like to change the default hostname >for-server<? The fully qualified hostname is used for the webserver certificate. If you are not sure, select No. [y/N] ###################################################################### # FOG now has everything it needs for this setup, but please # # understand that this script will overwrite any setting you may # # have setup for services like DHCP, apache, pxe, tftp, and NFS. # ###################################################################### # It is not recommended that you install this on a production system # # as this script modifies many of your system settings. # ###################################################################### # This script should be run by the root user. # # It will prepend the running with sudo if root is not set # ###################################################################### # Please see our wiki for more information at: # ###################################################################### # https://wiki.fogproject.org/wiki/index.php # ###################################################################### * Here are the settings FOG will use: * Base Linux: Debian * Detected Linux Distribution: Debian GNU/Linux * Interface: ens33 * Server IP Address: 10.22.228.171 * Server Subnet Mask: 255.255.255.0 * Server Hostname: for-server * Installation Type: Normal Server * Internationalization: 0 * Image Storage Location: /images * Using FOG DHCP: No * DHCP will NOT be setup but you must setup your | current DHCP server to use FOG for PXE services. * On a Linux DHCP server you must set: next-server and filename * On a Windows DHCP server you must set options 066 and 067 * Option 066/next-server is the IP of the FOG Server: (e.g. 10.22.228.171) * Option 067/filename is the bootfile: (e.g. undionly.kpxe) * Are you sure you wish to continue (Y/N) y * Installation Started * Testing internet connection.................................Done * Adding repository if needed.................................OK * Preparing Package Manager...................................OK * Packages to be installed: apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gzip htmldo c isolinux lftp libapache2-mod-php7.3 libc6 libcurl4 liblzma-dev m4 mariadb-clie nt mariadb-server net-tools nfs-kernel-server openssh-server php7.3 php7.3-bcmat h php7.3-cli php7.3-curl php7.3-fpm php7.3-gd php7.3-json php7.3-mbstring php7.3 -mysql php7.3-mysqlnd php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsft pd wget xinetd zlib1g * Skipping package: apache2.................................(Already Installe d) * Skipping package: bc......................................(Already Installe d) * Skipping package: build-essential.........................(Already Installe d) * Skipping package: cpp.....................................(Already Installe d) * Skipping package: curl....................................(Already Installe d) * Skipping package: g++.....................................(Already Installe d) * Skipping package: gawk....................................(Already Installe d) * Skipping package: gcc.....................................(Already Installe d) * Skipping package: genisoimage.............................(Already Installe d) * Skipping package: gzip....................................(Already Installe d) * Skipping package: htmldoc.................................(Already Installe d) * Skipping package: isolinux................................(Already Installe d) * Skipping package: lftp....................................(Already Installe d) * Skipping package: libapache2-mod-php7.3...................(Already Installe d) * Skipping package: libc6...................................(Already Installe d) * Skipping package: libcurl4................................(Already Installe d) * Skipping package: liblzma-dev.............................(Already Installe d) * Skipping package: m4......................................(Already Installe d) * Skipping package: mariadb-client..........................(Already Installe d) * Skipping package: mariadb-server..........................(Already Installe d) * Skipping package: net-tools...............................(Already Installe d) * Skipping package: nfs-kernel-server.......................(Already Installe d) * Skipping package: openssh-server..........................(Already Installe d) * Skipping package: php7.3..................................(Already Installe d) * Skipping package: php7.3-bcmath...........................(Already Installe d) * Skipping package: php7.3-cli..............................(Already Installe d) * Skipping package: php7.3-curl.............................(Already Installe d) * Skipping package: php7.3-fpm..............................(Already Installe d) * Skipping package: php7.3-gd...............................(Already Installe d) * Skipping package: php7.3-json.............................(Already Installe d) * Skipping package: php7.3-mbstring.........................(Already Installe d) * Skipping package: php7.3-mysql............................(Already Installe d) * Skipping package: php7.3-mysql............................(Already Installe d) * Skipping package: php-gettext.............................(Already Installe d) * Skipping package: sysv-rc-conf............................(Already Installe d) * Skipping package: tar.....................................(Already Installe d) * Skipping package: tftpd-hpa...............................(Already Installe d) * Skipping package: tftp-hpa................................(Already Installe d) * Skipping package: unzip...................................(Already Installe d) * Skipping package: vsftpd..................................(Already Installe d) * Skipping package: wget....................................(Already Installe d) * Skipping package: xinetd..................................(Already Installe d) * Skipping package: zlib1g..................................(Already Installe d) * Updating packages as needed.................................OK * Confirming package installation * Checking package: apache2...................................OK * Checking package: bc........................................OK * Checking package: build-essential...........................OK * Checking package: cpp.......................................OK * Checking package: curl......................................OK * Checking package: g++.......................................OK * Checking package: gawk......................................OK * Checking package: gcc.......................................OK * Checking package: genisoimage...............................OK * Checking package: gzip......................................OK * Checking package: htmldoc...................................OK * Checking package: isolinux..................................OK * Checking package: lftp......................................OK * Checking package: libapache2-mod-php7.3.....................OK * Checking package: libc6.....................................OK * Checking package: libcurl4..................................OK * Checking package: liblzma-dev...............................OK * Checking package: m4........................................OK * Checking package: mariadb-client............................OK * Checking package: mariadb-server............................OK * Checking package: net-tools.................................OK * Checking package: nfs-kernel-server.........................OK * Checking package: openssh-server............................OK * Checking package: php7.3....................................OK * Checking package: php7.3-bcmath.............................OK * Checking package: php7.3-cli................................OK * Checking package: php7.3-curl...............................OK * Checking package: php7.3-fpm................................OK * Checking package: php7.3-gd.................................OK * Checking package: php7.3-json...............................OK * Checking package: php7.3-mbstring...........................OK * Checking package: php7.3-mysql..............................OK * Checking package: php-gettext...............................OK * Checking package: sysv-rc-conf..............................OK * Checking package: tar.......................................OK * Checking package: tftpd-hpa.................................OK * Checking package: tftp-hpa..................................OK * Checking package: unzip.....................................OK * Checking package: vsftpd....................................OK * Checking package: wget......................................OK * Checking package: xinetd....................................OK * Checking package: zlib1g....................................OK * Configuring services *** Setting up fogproject user..................................Failed!** root@for-server:/home/kelly/fog_stable/bin# * Setting up fogproject user..................................Failed!
-
This is my first time ruining Linux so you are going to have to excuse me overlooking something stupid.
don’t worry, we all do that at some point. lol (i think that was a typo though)
did you create any users on the system other than the “kelly” one we see in the log?
-
@Junkhacker said in Cant create User - Setting up fogproject user..................................Failed!:
did you create any users on the system other than the “kelly” one we see in the log?
I did not. Im not sure i know how to do that at this point lol
-
i’m not sure what went wrong here. I haven’t installed fog on a Buster system yet, but i know others have without issue.
-
@bigmuddyfoot Please take a look at the logs you find in fogproject/bin/error_logs/ and post the last 10 lines here.
-
@Sebastian-Roth
How do i do that? -
@bigmuddyfoot said in Cant create User - Setting up fogproject user..................................Failed!:
How do i do that?
It depends on where the fog installer is, but it would be similar to this.
tail -20 /root/fogproject/bin/error_logs/foginstall.log
and assuming you are installing fog 1.5.7
tail -20 /root/fogproject/bin/error_logs/fog_error_1.5.7.log
-
@Sebastian-Roth : I too am seeing this issue with Debian 10.2.0 running 1.5.7. Here are my log files for you to take a look at. Let me know what I can do to help troubleshoot. I have also tested the dev-branch with the same result.
/fogproject/bin# tail -20 /fogproject/bin/error_logs/fog_error _1.5.7.log ii php7.3 7.3.11-1~deb10u1 all server-side, HTML-embedded scri pting language (metapackage) ii php7.3-bcmath 7.3.11-1~deb10u1 amd64 Bcmath module for PHP ii php7.3-cli 7.3.11-1~deb10u1 amd64 command-line interpreter for th e PHP scripting language ii php7.3-curl 7.3.11-1~deb10u1 amd64 CURL module for PHP ii php7.3-fpm 7.3.11-1~deb10u1 amd64 server-side, HTML-embedded scri pting language (FPM-CGI binary) ii php7.3-gd 7.3.11-1~deb10u1 amd64 GD module for PHP ii php7.3-json 7.3.11-1~deb10u1 amd64 JSON module for PHP ii php7.3-mbstring 7.3.11-1~deb10u1 amd64 MBSTRING module for PHP ii php7.3-mysql 7.3.11-1~deb10u1 amd64 MySQL module for PHP ii php-gettext 1.0.12-0.1 all transitional dummy package for php- php-gettext ii sysv-rc-conf 0.99-7 all SysV init runlevel configuration to ol for the terminal ii tar 1.30+dfsg-6 amd64 GNU version of the tar archiving ut ility ii tftpd-hpa 5.2+20150808-1+b1 amd64 HPA's tftp server ii tftp-hpa 5.2+20150808-1+b1 amd64 HPA's tftp client ii unzip 6.0-23+deb10u1 amd64 De-archiver for .zip files ii vsftpd 3.0.3-12 amd64 lightweight, efficient FTP server w ritten for security ii wget 1.20.1-1.1 amd64 retrieves files from the web ii xinetd 1:2.3.15.3-1 amd64 replacement for inetd with many enh ancements ii zlib1g:amd64 1:1.2.11.dfsg-1 amd64 compression library - runtime ../lib/common/functions.sh: line 1194: useradd: command not found
tail -20 /fogproject/bin/error_logs/foginstal l.log * Checking package: php7.3-fpm................................OK * Checking package: php7.3-gd.................................OK * Checking package: php7.3-json...............................OK * Checking package: php7.3-ldap...............................OK * Checking package: php7.3-mbstring...........................OK * Checking package: php7.3-mysql..............................OK * Checking package: php-gettext...............................OK * Checking package: sysv-rc-conf..............................OK * Checking package: tar.......................................OK * Checking package: tftpd-hpa.................................OK * Checking package: tftp-hpa..................................OK * Checking package: unzip.....................................OK * Checking package: vsftpd....................................OK * Checking package: wget......................................OK * Checking package: xinetd....................................OK * Checking package: zlib1g....................................OK * Configuring services * Setting up fogproject user..................................Failed!
-
@LJedi How do you run the installer?
sudo ./installfog.sh
? -
@Sebastian-Roth I run it just under the root user.
./installfog.sh
-
@LJedi said:
I run it just under the root user.
Ok, that’s correct then. I think I’ve heard another user who had that issue and found that he needed to add a PATH variable for
useradd
to be found. On the other hand our daily install testing seems to work great on Debian 10: http://fogtesting.theworkmans.us/I am not saying there is no issue. Just seems like we don’t know what exactly it is yet.
-
@Sebastian-Roth Thank you Sebastian. Anything I can do to help please let me know. For background, this was a clean install of Debian 10.2 that I did today. Tomorrow, I will be doing another install of Debian 10.2 on a different box. I will let you know what the results are.
-
@LJedi said:
Anything I can do to help please let me know
What happens if you simply run
useradd
in the root command shell? -
root@testbebian10:/# useradd bash: useradd: command not found root@testbebian10:/#
-
@LJedi Pretty clear. Try
echo PATH
and then/sbin/useradd
or/usr/sbin/useradd
Do you login as root directly or switch user? Which command exactly do you use to switch user?
-
@Sebastian-Roth : I log in as my normal user then use the
su
to switch over to the root user.Here is the results:
echo $PATH /sbin/useradd /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games /sbin/useradd
echo $PATH /usr/sbin/useradd /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games /usr/sbin/useradd
-
@Sebastian-Roth : I fixed it. I needed to do run
su -
and that fixed the Path variable that is not set properly. Fog is now installed correctly and theuseradd
worked great. This is the page that I found that lead me to the fix.
https://linuxconfig.org/command-not-found-missing-path-to-sbin-on-debian-gnu-linuxThanks again for your help.