ASRock B360M Pro4 imaging issue



  • hello guys!

    We ha a new hw at company, and we are having strange issue with it. During the imaging the stucks at a point telling cant get IP via dhcp. Actually it can, cos it is after it got already ip in the sooner step of pxe boot. Anyone maybe have such motherboard maybe? Looks like it is a driver issue or something, but as even the newest windows 10 knows nothing about it without personal attendance :) I think it is something really new, or having issues. It has an intel on board lan (well, on the specification page is confusing as says not too much about exact model number or i saw 1-2 different).

    image.jpg



  • I think that is missing lan driver, because it don’t try the udhcpd requests, but better report the kernel version to get response.

    If you can’t get the kernel version download a 4.12.x or upper, assign it to the computer and try if it works, if it works you can set it as default on fog settings page.


  • Moderator

    @Foglalt To confirm the kernel on the FOG server key in

    cd /var/www/html/fog/service/ipxe
    file bzImage
    

    That should report the kernel version. If you have less than 4.12.x then its probably missing the new intel nic driver.



  • @george1421 said in ASRock B360M Pro4 imaging issue:

    We need a bit more information to help you.

    What version of FOG are you using?
    What version of FOS Linux (kernel) are you using?

    If you manually register this target computer, setup a debug capture/deploy then pxe boot the device. After a few screens of text that you need to clear using the enter key, you will be dropped to a linux command prompt. At the FOS Linux command prompt key in lspci -nn | grep -i net and post the results here.

    Stay at the FOS Linux command prompt in case we need to have you type in a few more commands.

    the fog is 1.4.4. but the kernel… atm i dont know. will check later. We had to urgently finish that machine (not from our hw pool), so for next detail I have to wait a bit, but will gather what you requested. S soon I come with info I hope.


  • Moderator

    We need a bit more information to help you.

    What version of FOG are you using?
    What version of FOS Linux (kernel) are you using?

    If you manually register this target computer, setup a debug capture/deploy then pxe boot the device. After a few screens of text that you need to clear using the enter key, you will be dropped to a linux command prompt. At the FOS Linux command prompt key in lspci -nn | grep -i net and post the results here.

    Stay at the FOS Linux command prompt in case we need to have you type in a few more commands.


Log in to reply
 

362
Online

6.2k
Users

13.6k
Topics

128.1k
Posts