fog.deploy image option in PXE boot not resizing disk

[androsszit]

@Sebastian-Roth

Hey not sure if it matters now since the issue is closed. But I finally got a chance to post the images. Here’s pics of the good (top) bad (bottom). Please ignore the samsung on the 2nd, that’s just a USB SSD I’m using.

When it works:

Lots of unallocated space:

[Sebastian Roth]

@androsszit Well we can still open this thread again. Do you want us to look into this or are you happy with the modified partition layout you fixed it with?

It will be quite hard to replicate this issue as things are working great with my test machines/partition layout. I could try using the information you provided (d1.partitions …) but I have a feeling that there is something else to it. Lately we have seen at least two posts where expand didn’t work properly and I still assume it was a very weird issue in the binary captured d1.mbr which is very hard to come by (hex editing…).

Edit: What partition layout is this really? From my point of view this doesn’t match the layout figures you posted above.

[androsszit]

@Sebastian-Roth

Well if they don’t match that may be part of the issue. The layout is from two identical Optiplex 7060 with 500GB drives. Top was one that imaged successfully, bottom is what I see when it doesn’t. All should match my golden image which is also an Optiplex 7060 with a 500 GB drive. I’m not sure where the disconnect would be from fogs settings, the image, and what ends up on the machine.

Again I’ve more or less gotten around this by modifying my image. So I figure if this issue is unique to me it’s probably safe to let it go. If it does start poking up from others at least my info would be a good starting point.