Problems after 1.4.2 to 1.5.5 Upgrade

[EduardoTSeoane]

node=storage page and node=about pages solved.

Solution increase TimeOut and ProxyTimeout to 120 secs.

Currently only fails with list all hosts page.

[Fernando Gietz]

14500 computers in the database are a lot of. I had troubles in the past when I tried to list my 8000 computers, this was solved with the php-fpm module but maybe in you case the problem is other (timeouts in the database or used memory)

Any error in the apache logs?

[EduardoTSeoane]

@Fernando-Gietz
yes at the moment i found apache general TimeOut and fast-cgi ProxyTimeout.

That solve the storage list (node=storage) and the list of nodes in about page (node=about).

Maybe i must increase a bit more to test, but the error page is diferent.

[Sebastian Roth]

@EduardoTSeoane Which version of PHP do you have? rpm -qa | grep php or dpkg -l | grep php

[EduardoTSeoane]

@Sebastian-Roth

rpm -qa | grep php
php-common-7.2.18-1.el7.remi.x86_64
php-7.2.18-1.el7.remi.x86_64
php-ldap-7.2.18-1.el7.remi.x86_64
php-fpm-7.2.18-1.el7.remi.x86_64
php-json-7.2.18-1.el7.remi.x86_64
php-cli-7.2.18-1.el7.remi.x86_64
php-mysqlnd-7.2.18-1.el7.remi.x86_64
php-mbstring-7.2.18-1.el7.remi.x86_64
php-pecl-zip-1.15.4-1.el7.remi.7.2.x86_64
php-process-7.2.18-1.el7.remi.x86_64
php-pdo-7.2.18-1.el7.remi.x86_64
php-bcmath-7.2.18-1.el7.remi.x86_64
php-gd-7.2.18-1.el7.remi.x86_64

[EduardoTSeoane]

To be exactly the NDR is HTTP ERROR 500

[Sebastian Roth]

@EduardoTSeoane Ok, good to know you have PHP 7.2! Increasing the timeout is not too bad of an idea. There were changes since 1.5.5 that might be of help to you. So you might consider updating to 1.5.6 to see if that helps. Those are the changes that should help speed wise:

• https://github.com/FOGProject/fogproject/commit/859fca523636c407187190f3b34b2ced55b98c28
• https://github.com/FOGProject/fogproject/commit/87338676f5aa87687aad243ab47e80798151dd6c
• https://github.com/FOGProject/fogproject/commit/67b4e64ed6ed6190291fb9fbb9599d5c12af1792
• https://github.com/FOGProject/fogproject/commit/0e54cfe594de9da9becea3a88b556ae02697d671 (the most important one I reckon!)
• https://github.com/FOGProject/fogproject/commit/6ccf933d3358ef9e1847a35cc943ad26a03b8dd1
• https://github.com/FOGProject/fogproject/commit/c01e710d0eda05dda3a20767948e9e0534ef89dd
• https://github.com/FOGProject/fogproject/commit/3b4ff68ecd4944920366b18993f23f2da8f13075

You’ve probably one of the biggest FOG installations and I have to admit that we (as in the FOG devs) didn’t write the code with such huge environments in mind. So we need to work together to try and make this work more smoothly with lots and lots of nodes and clients.

So please try updating to 1.5.6 and we’ll take it from there.

[EduardoTSeoane]

@Sebastian-Roth @Fernando-Gietz

Solved!!!

Solution:
In /etc/httpd/conf.d/fog.conf (outside and before of VirtualHost tag):
Add this parameters:

• TimeOut 120
• ProxyTimeout 120

In /etc/php-fpm.d/www.conf

• Increase php_admin_value[memory_limit] = 1350M

But it’s hard to load the info.
Thank’s to all for help

[EduardoTSeoane]

@Sebastian-Roth @Fernando-Gietz
I’m glad to help in everything i can, only have to request.

Tomorrow I do a test, to start, on my dev environment with the same database.

By the moment I put the following feature request:

https://forums.fogproject.org/topic/13295/move-the-node-list-report-from-about-page-to-another-page-linked-on-about-page

[Sebastian Roth]

@EduardoTSeoane Definitely give 1.5.6 a try. The changes should make a difference in your case.

[EduardoTSeoane]

@Sebastian-Roth
Upgraded to 1.5.6 as you suggested.

It seems to be a bit faster, but i need to do the corrections on the server with the same values.

Now i’m experiencing another issue posted as https://forums.fogproject.org/topic/13328/fog-snapins-not-ordered-on-launching-time