New Fog Server - /images location
-
@george1421 Ok George, so going ahead with the default install and then will try the settings below. Sound right?
-
@george1421 Is it common to leave the mysql password blank?
-
@Technolust said:
Is it common to leave the mysql password blank?
No you better set a proper mysql root password before installing FOG. We are working on the installer to pilot people to set passwords.
-
@Sebastian-Roth That’s what I figured. Thank you!!!
-
@george1421 Hey George, in step 5, the Web GUI -> Fog Configuration -> Fog Settings -> Expand all -> there is no /images location. Should there be any specific settings? In step 6 do I also change the FTP path to /fogserver/images from /images? If so I did that as well. Finally step 10 - Looks good.
Export list for 127.0.0.1:
/fogserver/images/dev *
/fogserver/images *Can you tell me if this will need to be performed for every update or will fog server updates keep these settings?
-
Should the Storage Node show online?When I go to storage nodes it is up and running.
Thoughts?
Thanks,
Technolust
-
@Technolust said in New Fog Server - /images location:
Web GUI -> Fog Configuration -> Fog Settings -> Expand all -> there is no /images location
Sorry I wrote that post from memory since I didn’t have immediate access to a fog console to verify.
also change the FTP path to /fogserver/images from /images?
Right you need to change everywhere you would see /images to the new images path.
It looks good for the export list.
If you updated the .fogsettings file in step 1 then no, it should be automatic moving forward.
-
@Technolust What does the content of the default storage node look like?
Also did you reboot the fog server after you made all of those changes? Some values are only loaded at boot time.
-
@george1421 Thanks, I did make the change for the ftp path and I did update the .fogsettings in step 1 as well as rebooted the server. Only thing now is the Storage Node not coming online.
/fogserver/images/
[root@fogserver images]# ls -lrt
total 12
drwxrwxrwx. 3 fog root 4096 Jan 22 09:21 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postdownloadscripts
drwxrwxrwx. 2 fog root 4096 Jan 22 10:03 T470-Win10 -
@Technolust I don’t have a clue about the storage node on the home screen. But from your ls command you are missing 2 check files. If you run
ls -laon the old /images directory you will see a file called.mntcheckand the second one of the same name needs to be in /images/dev. Those will need to be recreated in your new location paths. You can simply do:
touch /fogserver/images/.mntcheck
and
touch /fogserver/dev/images/.mntcheckits ok if they are already there, that touch command will just update the last time the file was access, or create it if it wasn’t there.
-
@george1421 said in New Fog Server - /images location:
touch /fogserver/dev/images/.mntcheck
Ok looks like /fogserver/dev/images doesn’t exist. Is this supposed to be /fogserver/images/dev?
If so I ran touch touch /[root@fogserver images]# ls -la /fogserver/images/
total 20
drwxrwxrwx. 5 fog root 4096 Jan 22 10:03 .
drwxr-xr-x. 3 root root 4096 Jan 22 09:16 …
-rwxrwxrwx. 1 fog root 0 Jan 22 10:25 .mntcheck
drwxrwxrwx. 2 fog root 4096 Jan 22 10:03 T470-Win10
drwxrwxrwx. 3 fog root 4096 Jan 22 09:21 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postdownloadscripts
[root@fogserver images]# ls -la /fogserver/dev/images/
ls: cannot access /fogserver/dev/images/: No such file or directory
[root@fogserver images]# ls -la /images/
total 16
drwxrwxrwx. 4 fog root 4096 Jan 22 09:10 .
dr-xr-xr-x. 22 root root 4096 Jan 22 09:36 …
-rwxrwxrwx. 1 fog root 0 Jan 22 09:10 .mntcheck
drwxrwxrwx. 3 fog root 4096 Jan 22 09:10 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:10 postdownloadscripts
[root@fogserver images]#[root@fogserver images]# touch /fogserver/images/dev/
[root@fogserver images]# ls -la /fogserver/images/dev/
total 12
drwxrwxrwx. 3 fog root 4096 Jan 22 10:28 .
drwxrwxrwx. 5 fog root 4096 Jan 22 10:03 …
-rwxrwxrwx. 1 fog root 0 Jan 22 09:21 .mntcheck
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postinitscripts
[root@fogserver images]# -
@Technolust said in New Fog Server - /images location:
touch /fogserver/dev/images/.mntcheck
Ok looks like /fogserver/dev/images doesn’t exist. Is this supposed to be /fogserver/images/dev?
OK its time for either another cup of coffee or for me to just go back to bed. The path
/fogserver/dev/imagesis of course wrong. I should have typed/fogserver/images/devIt looks like you have the check file in the proper paths from your
lscommand. But after a reboot your storage node is still showing off-line? -
@george1421 No worries at all I figured that’s what you meant. My coffee needs coffee today! Just did another reboot. Node is still offline.
-
@Technolust Does the IP address in the default storage node configuration point to the right IP address?
I would do a test capture to ensure the image capture process completes correctly. If it does then do a deploy back to the same computer. If both work then we’ll bring the devs in to see if there is something “under the hood” wrong.
-
@george1421 Ok cool let me get that up and see. Will report after.
-
@george1421 Here is something strange, I RSYNC’d two images from the old Fog server to this new one and when I open the images link and select all images. No images show up. It’s appears to be acting like the Web GUI can’t see the /fogserver/images directory.
-
@george1421 Ok George, looks like I need another cup of coffee… I figured out why the Storage was not online. Two issues.
-
Selinux - Looks like I ran the script earlier without putting Selinux in Permissive mode so yeah it was breaking things. Found out when I tried to actually pull an image.
-
Permissions - Permissions for /fogserver dircetory needed to change ownership (was root:root needs to be fog:root) Recursively along with 777 so the /fogserver/images directory had the correct permissions but not the /fogserver dircetory.
Looks like things are good. I am Rsyncing the images back over from the old fog server and will try it again when they come over.
-
-
@Technolust Ah the fog prerequisites were not met. OK, good you had that bit figured out as well as the permissions.
So are you 100% good now?
-
@george1421 Just about. I can’t get the fog server to see the images I RSYNC’d over. Not sure how to get them to show up. I moved over two images to the /fogserver/images directory. Do you know how to move images from one Fog Server to another?
-
@Technolust Remember (or know) that with FOG there are 2 parts to the image.
- Raw data files stored in /images
- The metadata in the database.
You can rsync the files over, but you will need to create the metadata by going in and manually create a new image definition in the new FOG server. Create it manually by copy and pasting from the source FOG server. I would say export and import but I don’t know the impact of changing the /images directory when you import. Its just easy enough to copy and paste between the two servers.
Just call up the old server and the image definition and then create a new server definition on the new server and copy between.
