Intermittent Connection time out error.

[steharv]

@Tom-Elliott I cannot see any settings in my router for that?

[steharv]

@steharv

[steharv]

@Tom-Elliott Would I be better off just installing DNSMasq?

[Sebastian Roth]

@steharv said in Intermittent Connection time out error.:

Would I be better off just installing DNSMasq?

You probably would. Follow George’s post here (full config file) and check your dnsmasq version: https://forums.fogproject.org/topic/12133/fog-on-existing-dhcp-server/3

[steharv]

@Sebastian-Roth Thank you

[steharv]

@Sebastian-Roth I have tried restart dnsmasq but get the following error" Job for dnsmasq. service failed because the control process exited with errror code. See "systemctl status dnsmasq.service and “journalctl - xe” for details.

[Sebastian Roth]

@steharv said in Intermittent Connection time out error.:

journalctl - xe

Then run that command and post output here. As well post your full config here.

[steharv]

@Sebastian-Roth said in Intermittent Connection time out error.:
nit dnsmasq.service has begun starting up.

Nov 14 12:45:23 ste-VirtualBox dnsmasq[2453]: dnsmasq: syntax check OK.
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: dnsmasq: failed to create listenin
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: failed to create listening socket
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: FAILED to start up
Nov 14 12:45:23 ste-VirtualBox systemd[1]: dnsmasq.service: Control process exit
Nov 14 12:45:23 ste-VirtualBox systemd[1]: dnsmasq.service: Failed with result ’
Nov 14 12:45:23 ste-VirtualBox systemd[1]: Failed to start dnsmasq - A lightweig
– Subject: Unit dnsmasq.service has failed
– Defined-By: systemd
– Support: http://www.ubuntu.com/support

– Unit dnsmasq.service has failed.

– The result is RESULT.
Nov 14 12:45:23 ste-VirtualBox sudo[2447]: pam_unix(sudo:session): session close
Nov 14 12:49:44 ste-VirtualBox sudo[2828]: ste : TTY=pts/0 ; PWD=/home/ste
Nov 14 12:49:44 ste-VirtualBox sudo[2828]: pam_unix(sudo:session): session opene
lines 2203-2225/2225 (END)e

[steharv]

@Sebastian-Roth

dhcp-vendorclass=UEFI64,PXEClient:Arch:00009
Set the boot file name based on the matching tag from the vendor class (above)

dhcp-boot=net:UEFI32,i386-efi/ipxe.efi,,<fog_server_IP>
dhcp-boot=net:UEFI,ipxe.efi,,<fog_server_IP>
dhcp-boot=net:UEFI64,ipxe.efi,,<fog_server_IP>
PXE menu. The first part is the text displayed to the user. The second is the timeout, in seconds.

pxe-prompt="Booting FOG Client", 1
The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
This option is first and will be the default if there is no input from the user.

pxe-service=X86PC, "Boot to FOG", undionly.kpxe
pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi
pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi

dhcp-range=192.168.1.248,proxy

Mod Note: Fixed file formatting -Geo

[george1421]

@steharv Be sure to use my example completely and not just edit your ltsp.conf file to match. My config file is known to work correctly.

# Don't function as a DNS server:
port=0

# Log lots of extra information about DHCP transactions.
log-dhcp

# Set the root directory for files available via FTP.
tftp-root=/tftpboot

# The boot filename, Server name, Server Ip Address
dhcp-boot=undionly.kpxe,,<fog_server_IP>

# Disable re-use of the DHCP servername and filename fields as extra
# option space. That's to avoid confusing some old or broken DHCP clients.
dhcp-no-override

# inspect the vendor class string and match the text to set the tag
dhcp-vendorclass=BIOS,PXEClient:Arch:00000
dhcp-vendorclass=UEFI32,PXEClient:Arch:00006
dhcp-vendorclass=UEFI,PXEClient:Arch:00007
dhcp-vendorclass=UEFI64,PXEClient:Arch:00009

# Set the boot file name based on the matching tag from the vendor class (above)
dhcp-boot=net:UEFI32,i386-efi/ipxe.efi,,<fog_server_IP>
dhcp-boot=net:UEFI,ipxe.efi,,<fog_server_IP>
dhcp-boot=net:UEFI64,ipxe.efi,,<fog_server_IP>

# PXE menu.  The first part is the text displayed to the user.  The second is the timeout, in seconds.
pxe-prompt="Booting FOG Client", 1

# The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
# Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
# This option is first and will be the default if there is no input from the user.
pxe-service=X86PC, "Boot to FOG", undionly.kpxe
pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi
pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi

dhcp-range=<fog_server_ip>,proxy

Be sure to replace each instance of <fog_server_ip> with the IP address of your fog server. There are several instances of that tag in the config file above.

The last bit is to ensure you have the correct version or later of dnsmasq or the config file will not work. From the linux command prompt key in dnsmasq -v. The version returned should be 2.76 or later. If its earlier than this you will have issues with uefi systems even if you use my config file exactly.

[steharv]

@george1421 Thank you thank you!!! that worked you are a legend mate ! Its all running!