WOL ? Computer boot/start alone

[Steuve68]

Hello,

@x23piracy @george1421 Thanks for your answers.

I have tried your solution @x23piracy .
but … no way ! it doesn’t work ! Computer start always alone…
I don’t understand why !

@george1421 No task into FOGWEBUI

When I stop computer I run:

"tcpdump -i  eth0 '(udp and port 7) or (udp and port 9)' -vv -x | tee wol.log"

on my FOG Server and … nothing but computer start always !

If i run

tcpdump -n dst host "IP OF COMPUTER START ALONE"

i look:

13:46:49.129590 IP IPFOGSERVER.35593 > IPOFCOMPUTER.445: Flags [S], seq 1711374309, win 29200, options [mss 1460,sackOK,TS val 2078989 ecr 0,nop,wscale 7], length 0
13:46:50.126242 IP IPFOGSERVER.35593 > IPOFCOMPUTER.445: Flags [S], seq 1711374309, win 29200, options [mss 1460,sackOK,TS val 2079239 ecr 0,nop,wscale 7], length 0

and my computer start and i look

13:47:09.810532 IP IPFOGSERVER.46111 > IPOFCOMPUTER.2070: UDP, length 14
13:47:09.812972 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 15
13:47:09.813159 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.814626 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.815206 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.815913 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.816570 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.818901 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.819486 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.821192 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.821775 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460

Another idea ?

[x23piracy]

@steuve68 can you please try to use “powercfg -h off” from one of the problematic computers? will they still turn on? You will need an evaluated cmd prompt to do this.

[george1421]

@steuve68 said in WOL ? Computer boot/start alone:

IP IPFOGSERVER.35593 > IPOFCOMPUTER.445

This I can tell you is the fog server “pinging” the computer to see if its up. I can tell you that fog “pings” using this method instead of a traditional icmp ping. Why ?? I don’t know.

This does sound like what x23 says a fog “ping” will wake up the host. After fog starts I don’t know what those packets are.

I wonder of FOG will wake up the computer from a power up off state instead of a windows shutdown state?

[Steuve68]

So … I have update my Network Device Drivers
I have enabled “Wake on Pattern Match” for test.

For the moment the computer doesn’t start alone automatically.

I do not understand why suddenly the network drivers would be problematic.

I suspect the update Microsoft KB4103718 (https://borncity.com/win/2018/05/27/windows-7-update-kb4103718-network-issues-fixed/) which is a priori known to pose problems with network card.

That’s very strange …

[x23piracy]

@steuve68 have u tried to turn of hibernation by “powercfg -h off” in an evaluated cmd prompt?

[Steuve68]

@x23piracy No, i have just update NIC Device for test on this machine.
But hibernation mode is off
When i run: powercfg -a
“La mise en veille prolongée n’a pas été activée”

[x23piracy]

@steuve68 here is a link for the 2 years old conversation i had with tom about it:
https://pastebin.com/L1ixBrZd @tom-elliott don’t bash me for sharing this

[Tom Elliott]

@x23piracy why would I bash you. The only wake up code is in fog scheduler still.

Ping hosts just tests the status of a host. The reason we use 445 @george1421 is so we can get a status. Ping itself just tests if the host is pingable, but that doesn’t necessarily mean anything. Using 445 we can get a real status like refused, no address, etc…

So fog isn’t causing the problem being seen, but it is playing a part. That part is not by any means “fogs” fault, rather a configuration issue on the workstations.

[Steuve68]

@x23piracy I have test “powercfg -h off” with elevated privilege on 2 problematic computers
No change: computers start always alone.

For the moment the only solution what I found it’s up to date NIC Drivers …

@Tom-Elliott “Ping hosts just tests the status of a host.” => Can I disable this option into FOG ?

Thanks all

[Tom Elliott]

@steuve68 yes under fog settings Linux service.

[Steuve68]

@tom-elliott OK thanks
It’s that: PINGHOSTGLOBALENABLED ?

No secondary effect if i uncheck this option ?

[Steuve68]

@Tom-Elliott After uncheck PINGHOSTGLOBALENABLED, it’s OK.
Computer don’t start/boot alone.
WOL tasks always good !

No secondary effect ?

Thanks all

[Quazz]

@steuve68 You won’t be able to see if hosts are online with it disabled but that should be it afaik.

[x23piracy]

@steuve68 and in the end it was the online check from fog activating that computers, like i told you I still have the ping check enabled i solved my problems around that with hibernating off und pattern match in nic drivers disabled.

Regards X23