@george1421 Yes, if i change password of one user into FOG_Admin, It change immediatly for connect to FOG WEBUI.

@Tom-Elliott After uncheck PINGHOSTGLOBALENABLED, it’s OK.
Computer don’t start/boot alone.
WOL tasks always good !

No secondary effect ?

Thanks all

@tom-elliott OK thanks
It’s that: PINGHOSTGLOBALENABLED ?

No secondary effect if i uncheck this option ?

@x23piracy I have test “powercfg -h off” with elevated privilege on 2 problematic computers
No change: computers start always alone.

For the moment the only solution what I found it’s up to date NIC Drivers …

@Tom-Elliott “Ping hosts just tests the status of a host.” => Can I disable this option into FOG ?

Thanks all

@x23piracy No, i have just update NIC Device for test on this machine.
But hibernation mode is off
When i run: powercfg -a
“La mise en veille prolongée n’a pas été activée”

So … I have update my Network Device Drivers
I have enabled “Wake on Pattern Match” for test.

For the moment the computer doesn’t start alone automatically.

I do not understand why suddenly the network drivers would be problematic.

I suspect the update Microsoft KB4103718 (https://borncity.com/win/2018/05/27/windows-7-update-kb4103718-network-issues-fixed/) which is a priori known to pose problems with network card.

That’s very strange …

Hello,

@x23piracy @george1421 Thanks for your answers.

I have tried your solution @x23piracy .
but … no way ! it doesn’t work ! Computer start always alone…
I don’t understand why !

@george1421 No task into FOGWEBUI

When I stop computer I run:

"tcpdump -i  eth0 '(udp and port 7) or (udp and port 9)' -vv -x | tee wol.log"

on my FOG Server and … nothing but computer start always !

If i run

tcpdump -n dst host "IP OF COMPUTER START ALONE"

i look:

13:46:49.129590 IP IPFOGSERVER.35593 > IPOFCOMPUTER.445: Flags [S], seq 1711374309, win 29200, options [mss 1460,sackOK,TS val 2078989 ecr 0,nop,wscale 7], length 0
13:46:50.126242 IP IPFOGSERVER.35593 > IPOFCOMPUTER.445: Flags [S], seq 1711374309, win 29200, options [mss 1460,sackOK,TS val 2079239 ecr 0,nop,wscale 7], length 0

and my computer start and i look

13:47:09.810532 IP IPFOGSERVER.46111 > IPOFCOMPUTER.2070: UDP, length 14
13:47:09.812972 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 15
13:47:09.813159 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.814626 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.815206 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.815913 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.816570 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.818901 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.819486 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.821192 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460
13:47:09.821775 IP IPFOGSERVER.46892 > IPOFCOMPUTER.2071: UDP, length 1460

Another idea ?

Hello,

I have a curious problems with FOG ? (maybe ?) and WOL.

FOG version: 1.5.4 on Debian 8.4
3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux

I explain:
When a user stop the computer with windows menu Starts => Stop, the computer power off.
That’s OK.
But … avg 5 minutes after that a WOL signal wake up the computer … and it boot on fog menu pxe wait 5 sec with the fog menu and boot on the HDD.

I’m sure the WOL signal it’s send by my FOG Server, because if i stop my FOG server the problem disapear.

Nothing tasks into FOG WEBUI.

I have used the wolbroadcast plugins. For the moment i have delete this plugins for see if the problems come from him.

I precise, the problem appear on DELL Optiplex 9020.
Several machines are concerned.
Computers are conf for boot on HDD 1frst.
BIOS are conf for WOL with PXE

Have you any idea ?

Thanks for answers/idea.

@george1421 Yes, if i change password of one user into FOG_Admin, It change immediatly for connect to FOG WEBUI.

@tom-elliott Hello,

So, i have try to working 1-5-1
FOG 1.5.0.16

Globally it’s OK, it’s works fine !
When i deleted one user of the FOG_Admin group it cannot acces to WEBUI FOG ! (and not deleted to Users table in SQL)
When i change password of one AD users (into group FOG_Admin) it cannot acces to WEBUI with old password => Work fine with the new password

I have look 2 “problems” (not verify important but … it might be interesting)

1. The news LDAP Plugins don’t work with group nesting (a group into a group) per example:

if i add into FOG_Admin just another group (IT_Services per example) with IT services members, no members can acces to WEBUI FOG. If i add individualy user into FOG_Admin, it’s work !

2. If i delete one user into FOG_Admin, he can still log in just once. The second time he can not anymore. Synchronization is ok

Not really really bad but it could be points for improvement

in any case, A BIG THANK YOU

@tom-elliott yes thanks ! i’m not very very good in sql !

I can try to put this request to logout WEBUI pending a better solution…
In which file could I make this change for try ?

Thank you !