Fog using a huge amount of memory and failing

[Joe Gill]

@george1421
I have also been experiencing high memory usage and sluggishness. I completely lost my interface and had to restart PHP in order for the interface to return. I will also try your suggestion here to see what is going on.

[george1421]

@joe-gill If you are not on FOG 1.5.4, but are using 1.5.1 to 1.5.3 there is a fix that is needed to php-fpm to address memory bloat under certain conditions.

[Joe Gill]

@george1421
I actually upgraded to FOG 1.5.4 and the issue persisted.

[george1421]

@joe-gill ok we need to collect a bit more info here. It sounds like a trend is starting.

1. What OS is the host OS for FOG?
2. What is your memory installed in the fog server?
3. What process is using the most memory?
4. What process is using the most CPU utilization?
5. Number of clients you have that has fog installed
6. Fog check in interval Fog Configuration -> Fog Settings -> Fog Client -> FOG_CLIENT_CHECKIN_TIME (if you have less than 300 [5 minutes] you might want to bump that up to 300 or 600 seconds).

[Joe Gill]

@george1421

Let me know if their is anything else you would like me to check. Thanks!

[george1421]

@joe-gill Ok you are using php-fpm. That is good. Now we need to understand what is consuming the memory. I had a previous post where I was asking specific questions about your current setup. Please respond to that… and

Depending on your distro there is a php-fpm file that fog creates it should be in /etc (in a sub directory) called www.conf. Under centos 7 its in /etc/php-fpm.d Lets review that file, towards the middle there should be this line uncommented.

pm.max_requests = 2000

Let make sure its not commented out.

[Joe Gill]

@george1421
Running on a Hyper V Virtual Machine
FOG OS - Debian 9.4
Memory - 4 GB
CPU - 2 CPUs allotted

I used Top to determine these. If their is a better command let me know and I will certainly run that and report back.

Memory Usage (in order from most to least) –
Apache2 (20 percent)
mysql
FOGImageSize
FOGPingHosts
FOGSnapinHash

CPU Usage –
Apache2

[george1421]

@joe-gill Can I get to bits of info I forgot to ask?

1. Top CPU usage service
2. Number of clients you have in your FOG environment
3. Fog check in interval Fog Configuration -> Fog Settings -> Fog Client -> FOG_CLIENT_CHECKIN_TIME (if you have less than 300 [5 minutes] you might want to bump that up to 300 or 600 seconds).

[Joe Gill]

@george1421
Top CPU usage service is Apache2.
Total hosts is ~500.

Where is the www.conf file located in Debian? I searched high and low and could not find it. I found something in the /etc/php/7.0/ directory but it didn’t have pm.max_requests.

Thanks!

[george1421]

@joe-gill said in Fog using a huge amount of memory and failing:

/etc/php/7.0/

is probably a close directory for php 7.x in there should be a maybe a /etc/php-fpm.d directory and in that there should be www.conf. The file name is consistent its just the location of the file that changes with the version of php.

Also I added an additional question to my list.

Fog check in interval Fog Configuration -> Fog Settings -> Fog Client -> FOG_CLIENT_CHECKIN_TIME (if you have less than 300 [5 minutes] you might want to bump that up to 300 or 600 seconds).

[Joe Gill]

@george1421

I seem to be having bigger issues. PHP is completely un-responsive now. I can and have been able to reach the Apache test page on our server but cannot get anything to run in php. I tried restarting the service, rebooting the server, unistalling php and re-running the fog installer. I will start a new thread and tag you in it.

[jstephen]

@george1421 Huh. I’ve got Apache 2.0 Handler here. Should I follow the steps in the link or is there something else that I should do?

[george1421]

@jstephen You have 1.5.4 installed, but you have the apache handler in place and you didn’t change it?

If that is true then I can understand why your UI is a bit sucky. That is why they moved to php-fpm. Wait your info.php page showed that you had the fast cgi enabled.

edit: Hint, make sure you are replying to the proper thread.

[jstephen]

@george1421 George, I think I did reply to the proper thread… it is just a little confusing since someone else with a similar problem seems to have popped in!

Fog is version 1.5.4. This same server has been updated through many, many versions for 4 years or mo so maybe it has some lingering old stuff!

My phpinfo page does not indicate that I have FastCGI enabled. I’m reading through this thread ( https://forums.fogproject.org/topic/10717/can-php-fpm-make-fog-web-gui-fast/4 ) now to see whether there is information about getting mpm working.

[george1421]

@jstephen Sorry my mistake same issue and same color avatar.

I don’t think the FOG installer is setting mpm by design. That will help with performance but not using php-fpm will give you a craptacular experience with the new gui.

So you ran the info-php script and its still reporting Apache handler?

[george1421]

I was able to remote in and find out what was going sideways with the OP’s system. I’ll fill out the details in a bit, but there is the keys.

mods-enabled/php5.conf set handler

9.4

sites-enabled/001-fog.config

It appears to be an issue with at least debian 9.4 at the moment where php-fpm wasn’t being enabled causing the sluggish UI and high apache usage.