Continuous Fog Storage Node Replication problem

[MPSAdmin]

ok… I noticed something else… the portions I deleted from the originall fogreplicator.log are html pages from the synology. Is there a reason that the fog server is pulling html files from the synology?

[Wayne Workman]

@mpsadmin said in Continuous Fog Storage Node Replication problem:

Is there a reason that the fog server is pulling html files from the synology?

It could be that the FTP Root is not set correctly for the synology. See this section: https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_FTP#FTP_Path There are notes in there specifically about Synology devices. Use the troubleshooting higher in the article to determine what the FTP Root path is.

[george1421]

Here is my POC tutorial to setup a synology nas as a FOG storage node: https://forums.fogproject.org/topic/9430/synology-nas-as-fog-storage-node

You need to watch directory permission on the synology NAS as well as nfs share permissions.

[MPSAdmin]

Still doing the same thing. Rolling right through each file over and over again. I changed the rights to the folders as recommended.

[Wayne Workman]

@mpsadmin But did you check the FTP root by logging in via FTP?

[MPSAdmin]

@george1421
Hi George. I had hoped that you would chime in as I followed your fantastic storage node document when I set this up.
in just noticed that the ‘images’ shared folder didn’t have rights for the fog user.

[MPSAdmin]

@wayne-workman
yes I did. I logged in via ftp and was able to browse with no issues.

[george1421]

@mpsadmin So are the files actually making it to the NAS? The only reason why the fog server would keep replicating is because the check sums would not match so it will send the file over again. Possibly date/time mismatch might trigger the replication again, but I think they are focusing on the check sum as the key to replicate.

[Wayne Workman]

@mpsadmin said in Continuous Fog Storage Node Replication problem:

I logged in via ftp and was able to browse with no issues.

That’s not what I am referring to - I would like for you to FTP into the NAS and figure out where you land - i.e. the FTP Path directory.

• Is the directory where you land the FTP Path that is set for this node?
• What is your landing directory?

[MPSAdmin]

@wayne-workman Apologies for not providing clearer info. The paths for the storage node are configured within fog as follows:

The ftp paths are as follows:

The files being replicated are within the G3-0118.1 folder, as listed below:

the source folder on the fog server is the /images folder, as shown below.

Additionally, I have verified that both the synololgy and the fog server are using the same ntp source as the rest of the devices on the network. (a windows domain controller). After changing the ntp settings, i stopped the fog replication service, deleted the files from the synology folder, and restarted the replication service.

Thanks. I’ll keep digging. Most likely it is something simple that I have done.

[MPSAdmin]

@george1421 yes, the files are making it to the NAS. Fog is replicating at full speed, up to the configured bandwidth limit. Once the files are replicated, the process begins anew.

[MPSAdmin]

Also, just checked with the d1.mbr file… md5 checksums match.

040d5ad57af1942104ab788d3b12778e fogserver
040d5ad57af1942104ab788d3b12778e synology web console

d1p1.img…checksums match here too.
79d8b1a77b8111418481c121c246501b fog server
79d8b1a77b8111418481c121c246501b synology web console

[george1421]

@mpsadmin OK then we might need an opinion from one of the @developers to give us an idea why the NAS is not reporting what the FOG replicator expects.

If I remember right there is 2 or 3 replicator logs. One is the main replicator log, one is for the storage node, and there may be a log file for each image being replicated. I don’t have access to my production FOG server at the moment to confirm. But I thought the logs were pretty descriptive to why it was replicating.

[george1421]

@mpsadmin I have my fog-pi server with me that has FOG 1.4.4 on it. I’m looking at the code and it appears to rely on the file byte count being the same to indicate if the file needs to be replicated or not. I’m not a programmer so this object oriented php is a bit greek to me. But so far it looks like byte count is the trigger. Now this is the byte count as reported by FTP session. Also the log writes to /opt/fog/log look fairly descriptive to what exactly the replicator is doing.

[Wayne Workman]

@mpsadmin Did you use the FTP option when logging in via WinSCP? I ask because I want to be sure. Photo:

[Wayne Workman]

@mpsadmin said in Continuous Fog Storage Node Replication problem:

the portions I deleted from the originall fogreplicator.log are html pages from the synology. Is there a reason that the fog server is pulling html files from the synology?

@Developers I believe that quote is a symptom of the root problem. I am just trying to drill down to why.

[Tom Elliott]

@wayne-workman It’s not a problem fog is causing. It’s a problem with how fog manages to do things. The request being made to the synology is not a fog based system and so synology is responding with its own information.

This is just a guess on my part, but it’s unlikely to be anything we can fix.

[MPSAdmin]

@wayne-workman yes. used ftp.

[MPSAdmin]

Here are the logs from the replication, if you have time to look at them.

fogreplicator.log https://pastebin.com/Lb0Kc17n
fogimagesize.log https://pastebin.com/NN0nyrbY
fogreplicator…transfer.spg-syn1.log https://pastebin.com/VHtHRZq3
fogreplicator.G3-0118.1.transfer.spg-syn1.log https://pastebin.com/U51QxtkY

[MPSAdmin]

What protocol does fog use to verify its images? somehow fog is pulling html from the synology… makes me wonder if it is looking in the /fog web path on the synology?

(the synology guide by george says this folder doesnt matter because its not a real storage node)

wondering if I can ‘create’ a webserver on the synology with the path fog is looking for? just a little more patience guys…i’d appreciate it.

Thanks!