How To: Make progress bars appear for multiple-partition tasks
-
Hi,
these are the changes i found:
[B]==========================Change 1==========================[/B]
[IMG]http://i.imgur.com/Czb26ws.png[/IMG][B]==========================Change 2==========================[/B]
[IMG]http://i.imgur.com/WWLRp1D.png[/IMG][B]==========================Change 3==========================[/B]
[IMG]http://i.imgur.com/ySnh8cj.png[/IMG][B]==========================Change 4==========================[/B]
[IMG]http://i.imgur.com/wlHPUlK.png[/IMG][B]==========================Change 5==========================[/B]
[IMG]http://i.imgur.com/0N6GeHC.png[/IMG]Anyway your file works
Greetz X23
-
[quote=“x23piracy, post: 12240, member: 3982”]Hi,
these are the changes i found:
[B]==========================Change 1==========================[/B]
[IMG]http://i.imgur.com/Czb26ws.png[/IMG][B]==========================Change 2==========================[/B]
[IMG]http://i.imgur.com/WWLRp1D.png[/IMG][B]==========================Change 3==========================[/B]
[IMG]http://i.imgur.com/ySnh8cj.png[/IMG][B]==========================Change 4==========================[/B]
[IMG]http://i.imgur.com/wlHPUlK.png[/IMG][B]==========================Change 5==========================[/B]
[IMG]http://i.imgur.com/0N6GeHC.png[/IMG]Anyway your file works
Greetz X23[/quote]
-
What’s suppose to be in the init.gz file? I see the init file inside of mine, am i suppose to download the fog.zip file & overwrite the init.gz file ? or do i take out the fog file & add that to my init.gz file?
As you can see i’m confused on this one
-
[quote=“The Dealman, post: 12945, member: 53”]What’s suppose to be in the init.gz file? I see the init file inside of mine, am i suppose to download the fog.zip file & overwrite the init.gz file ? or do i take out the fog file & add that to my init.gz file?
As you can see i’m confused on this one[/quote]
Did you figure this out or do you still need assistance?
-
[quote=“smshahan, post: 13196, member: 2574”]Did you figure this out or do you still need assistance?[/quote]
I haven’t gotten it to work so i put init.gz file back how it was.
-
[quote=“smshahan, post: 13196, member: 2574”]Did you figure this out or do you still need assistance?[/quote]
Do you have this working?
-
[quote=“The Dealman, post: 13235, member: 53”]Do you have this working?[/quote]
Haven’t fully tested my changes out but I’ll get back to you possibly Wednesday if I get this working. I’ve been busy with another fog server.
-
[quote=“The Dealman, post: 13235, member: 53”]Do you have this working?[/quote]
Okay. Its working now.
This is what I did. Logged in via putty and did the following.
[LIST]
[]cd /tftpboot/fog/images
[]gunzip init.gz
[]mkdir initmountdir
[]mount -o loop init initmountdir
[/LIST]
Connected via WinSCP and navigated to /tftpboot/fog/images/initmountdir/binWhat I did was simply copy the new fog file ( that was shared) over to the location of my old one( /tftpboot/fog/images/initmountdir/bin) and overwrote that file. I also made a copy of my old fog file just in case it didn’t work.
After that I went back to putty and did the following.
[LIST]
[]cd /tftpboot/fog/images
[]umount initmountdir/
[]rmdir initmountdir
[]gzip init
[/LIST]
For some reason if I tried copying just the code from the new to the old it would either reboot continuously or give me a big blank nothing. There is a missing step I’m sure in that list or maybe a semicolon out of place. -
You used these files? [url]http://fogproject.org/forum/attachments/fog-zip.321/[/url]
-
[quote=“The Dealman, post: 14130, member: 53”]You used these files? [url]http://fogproject.org/forum/attachments/fog-zip.321/[/url][/quote]
Yes.
-
[quote=“smshahan, post: 14131, member: 2574”]Yes.[/quote]
ok i will that shot & report back the results
-
I tried both manually editing the file and copying the file over from the forum and in both cases, fog starts looping when trying to deploy an image. I am running .32
-
[quote=“jbrabhamMSD, post: 24125, member: 22901”]I tried both manually editing the file and copying the file over from the forum and in both cases, fog starts looping when trying to deploy an image. I am running .32[/quote]
Did you reboot the server after you replaced the fog file and gziped the init file ?
-
I just tried that. Didn’t help.
-
[quote=“jbrabhamMSD, post: 24130, member: 22901”]I just tried that. Didn’t help.[/quote]
I could not get this to work either. I made the changes to the fog file but still do not have a progress bar with a multiple partition image. Did you ever get it figured out? I am using ver 0.32
-
Is this multiple partition, single disk, and is it upload or download task that is not showing, or both?
-
[quote=“chad-bisd, post: 33910, member: 18”]Is this multiple partition, single disk, and is it upload or download task that is not showing, or both?[/quote]
It is a windows 7 multiple partition deploy task that does not show i dont think i looked at an upload task.
Thanks -
Multipartition imaging in 0.32 never showed progress bars natively.
-
[quote=“Tom Elliott, post: 33912, member: 7271”]Multipartition imaging in 0.32 never showed progress bars natively.[/quote]
I was under the impression that the code (fog file) in this thread fixed that.
-
I don’t know if it did or didn’t. Did you edit the files yourself or use the files provided in the link?
