SOLVED RC 1.5.0-RC9 Kernel Install issue

[Zach Bratcher]

When trying to install new kernel from the GUI interface when you click on Install it does nothing. I get no error or conformation that it downloaded the kernel and installed it. I am running Running Version 1.5.0-RC-9 SVN Revision: 6080
Current Kernel is 4.4.0-92-generic and trying to update to
Version: 4.13.4
FOG Type: TomElliott
Architecture Type: 64 bit

[Zach Bratcher]

@tom-elliott Oh Ok… Thanks for the help. Now to just get the PXE working on my local subnet I will be good to go. This is a local network issue.

Thanks for the help.

[Tom Elliott]

@zach-bratcher You’re on working branch, this is normal.

Working is not calculated as “latest” version.

Latest is considered one of the RC’s or the latest Stable.

[Zach Bratcher]

@tom-elliott Thanks that worked. Getting this when I go to the default FOG configuration page.
You are not running the most current version of FOG!
You are currently running version: 63

Latest stable version is 1.4.4

Latest svn version is 6078

Latest git version is 1.5.0-RC-9

So guess the latest version is having that issue.

[Zach Bratcher]

@tom-elliott Running that now

[Tom Elliott]

@zach-bratcher Please do as I suggested including the git checkout, through the installfog.sh.

[Zach Bratcher]

@tom-elliott root@WacoFogServer:/fog/fogproject# git pull
remote: Counting objects: 30, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 30 (delta 17), reused 30 (delta 17), pack-reused 0
Unpacking objects: 100% (30/30), done.
From https://github.com/FOGProject/fogproject
c77c654…94cd6d1 working -> origin/working
Already up-to-date.

[Tom Elliott]

cd /<path>/<to>/<git repo>/
git pull
git checkout working
git pull
cd bin
./installfog.sh -y

[Tom Elliott]

I solved this thread as I found the issue in the latest working, and was able to fix it and push out a fix for it too.

[Tom Elliott]

@zach-bratcher Are you using git?

[Zach Bratcher]

@tom-elliott What is the URL to working branch or the process. I have been using the Trunk update process.

Thanks

[Tom Elliott]

@zach-bratcher Again I ask if you can please install working branch to see if this is already taken care of, i believe it is, though confirmation would be great from those that are having the problem.

[Zach Bratcher]

When I am on this screen and click the Install button is when I get no error or nothing it doesn’t do anything. I even look in /var/www/fog/service/ipxe on the server and do not see any new bzImage files.

[Tom Elliott]

@zach-bratcher I’m pretty sure this is fixed in the working branch. Anyway I can ask you to try it out?

[Zach Bratcher]

No… It was working fine when I was on RC5 and stopped right after the upgrade.

[Sebastian Roth]

@Zach-Bratcher You connected to the internet through a proxy server by any chance?