Imposible to boot from hard drive
-
The last build, last update.
-
This is now the fourth post in the last several weeks where 1703 is not behaving well on exit from iPXE. There must be some change with Win10 1703 that iPXE is not aware of.
https://forums.fogproject.org/topic/10652/windows-10-1703-won-t-boot-on-sanboot
-
In practical terms, what is the problem? Problem between UEFI and Legacy?
-
@aksl said in Imposible to boot from hard drive:
Problem between UEFI and Legacy?
The problem is that there is something new/unique that Microsoft has done with 1703 -OR- the iPXE developers changed something so that the iPXE kernel can’t find the hard drive when sanboot exit mode is picked.
-
Hm, ok !
I do not really understand the problem at all. Currently there are no solutions is that right?
-
George is saying that the problem is either Microsoft’s or iPXE’s - and we’re still trying to figure it out more exactly. This is a very new problem.
-
I tried with Windows Rev. 1607 and the problem was same.
Hmm…
-
@aksl Ok, so this sounds like you have a different issue than the other guys.
Is this happening on one single PC or several ones? If this is more than one, are those all the same model? Please tell us more about the PCs you are using. Vendor, model, …
-
Hi,
So, i tested with :
Dell Optiplex 3020M.
There is no deployed image.
Just the basic OS (Windows 7).
Schema : Boot from PXE -> First choice (boot from hard drive) -> Black screen (no action)
-
My bad … Doesn’t working with ‘Sanboot’, true !
But with ‘First HDD it’s ok’.
I have other model : Motherboard ASUS A58M-E : imposible to boot (Win 8.1/10).
-
@aksl said in Imposible to boot from hard drive:
Dell Optiplex 3020M.
I think I asked this before, but is the 3020M configured in uefi mode? Its important to know because uefi systems need a different exit mode than bios (legacy) mode. For uefi mode systems you should use the exit mode of rEFInd, sanboot is for bios(legacy) mode systems.
-
New windows 10 (legacy) is ok …
Windows 10 UEFI, imposible.
Regardless of the exit mode.
-
No solutions ?
Sorry
-
@aksl The things you posted are a bit mixed up. This way we won’t get any further I am afraid. So same question again. Is this happening on one single PC or several ones? All the same model/vendor or different ones? Please post a proper list of the PC you tested this on, like this:
- Dell Optiplex 3020M - UEFI - exit type: rEFInd - hangs on black screen
- …
-
Thanks for your help.
In fact, it’s simple.
For all PCs with Legacy mode, it’s working.
For all PCs with UEFI mode, isn’t working (tried all exit mode).
Windows 7, 8 & 10 !
-
@aksl For uefi, rEFInd is really your best option. Make sure you have the exit mode for the specific computer and uefi set to rEFInd and then lets tell refind to look in more places for a boot drive.
- On the fog server from a linux console prompt edit the following file:
/var/www/html/fog/service/ipxe/refind.conf - Search for the line
scanfor internaland comment it out to look like this
#scanfor internal- Search for the line
#scanfor internal,hdbios,external,biosexternaland uncomment it to look like this
scanfor internal,hdbios,external,biosexternal- Save and exit the editor.
- Now pxe boot the uefi system and see if that mode finds the hard drive.
rEFInd “should” find the boot disk if it’s installed.
- On the fog server from a linux console prompt edit the following file:
-
And as well, while you edit
/var/www/html/fog/service/ipxe/refind.confset the optiontimeoutto zero. Then it would show you another boot selection menu. So hopefully we will see anything on screen at least.@aksl said:
For all PCs with Legacy mode, it’s working.
For all PCs with UEFI mode, isn’t working (tried all exit mode).
Windows 7, 8 & 10 !Have you actually installed those systems in UEFI mode? It’s very different to install windows in legacy BIOS mode and then just switch over to UEFI later on.
-
Hi,
I edited the refind.conf and timeout is now zero.
I don’t see any difference in the boot menu.
Do I have to press a key ?
Currently functioning as before.
Thanks
-
@aksl Did you also change the things in refind.conf George suggested? See his post a little further down.
-
Oh, I had not seen sorry.
But I tested and finally it’s the same problem.
Always this line which flashes in the top left.
With your different shifts, I have not seen any behavior changes in the boot menu.
I don’t know what to do …;
Thanks
