Failed ipxe/boot.php because of different IP

[Skrou]

Thanks for the fast reply.
I’m setting this up so we can deploy terminals to my company’s clients with zero touch deployment. So reinstalling everytime for any client will be too much of a hassle. So i need to migrate it every single time that terminal deployment is asked.

[george1421]

You can fix this if you want.

There are 3 places the IP address hides in the FOG Gui and 2 places in the linux OS.

Web GUI:
1 and 2 Go into FOG configuration -> FOG settings and expand all. Down towards the bottom there will be a tftp section and a web section. Ensure the IP address there is correct.
3 Go to the storage node configuration (probably default or defaultMaster) for this fog server. There is an ip address in there.

FOG server linux console:
1 edit the file /tftpboot/default.ipxe
2 edit the file /opt/fog/.fogsettings

Once that is all done rerun the fog installer. You won’t need to make any changes just run through the installer again and it will clean up any remaining bits for you.

[george1421]

@Skrou said in Failed ipxe/boot.php because of different IP:

So i need to migrate it every single time that terminal deployment is asked.

I’m not sure I understand this statement. If you are creating a FOG mobile deployment server there is another option where the IP address could change often. FOG really doesn’t like its host OS changing IP addresses. The mobility script will help this situation.

[Skrou]

Yes. It is in my best interest for this to be a mobile deployment server.
Where is that option and what’s the mobility script? (Sorry for all of this but I’m still a starter user as far as Linux goes.)

[george1421]

@Skrou You can get the script from here https://github.com/FOGProject/fog-community-scripts It was written by another FOG Project moderator @Wayne-Workman

[Skrou]

Nice! Thanks!!

[george1421]

@Skrou If you will be taking the fog server into an uncontrolled environment (i.e. customer sites) you will probably want to install dnsmasq on the fog server to provide the dhcp pxe boot settings needed to pxe boot target computers so you aren’t relying on the existing infrastructure for pxe booting support.

[Skrou]

Yeah, I got that since it was mentioned in the mobile script that you linked before and I looked it up. Will definetely give it a shot.
Unfortunately, I will continue my FOG project in 3 months time, since from Monday onwards I will be deployed to a customer for like 3 months.

Thanks again!

[george1421]

@Skrou get a raspberry pi3 and setup a fog server in your hotel room

[Skrou]

I will set it up at my home lab in my free time. As a new recruit here, if I can make this work, it will be a good ++ for my future here.
And once again, thanks a lot!

[Wayne Workman]

@george1421 said in Failed ipxe/boot.php because of different IP:

you will probably want to install dnsmasq on the fog server

That’s how the MakeFogMobile scripts work, they use dnsmasq. This is because the intention is mobility.