Fog 1.3.0 : PB with Mac NetBoot

[dfuriet]

On my iMac14,1, I can’t go into the menu because there a no errror showing, only banner text :

iPXE initialising device...ok

iPXE 1.0.0+ (26050) -- Open Source Network Boot Firmware -- http://ipxe.org
Features : DNS FTP HTTPS iSCSI NFS TFTP SRP VLAN AoE EFI Menu

then crashed with nothing else

Sometime I have more, like my first (reversed) picture

My second picture is on a iMac17,1, but I don’t have it anymore

[dfuriet]

Immediately after banner text is displayed, Ethernet Card power off a few seconds, then Ethernet Card power on… It’s at this time that ipxe crash

[Imperilled]

Hello,

I have exactly the same problem !
Yesterday, I update one iMac with apple store. When finished I Tried to upload image and can’t boot on PXE. It’s freezing.

I tried this morning to download image on another iMac and it works.

I think it’s a bios update in the lasts macOs updates who makes the problem …

[george1421]

@Imperilled said in Fog 1.3.0 : PB with Mac NetBoot:

I think it’s a bios update in the lasts macOs updates who makes the problem …

When it comes to Macs I’m a bit ignorant so this question may be off point. Is there an option to roll back the bios update or is that tied to the macOS you are currently running.

For documentation purposes, can you post the version of the bios/firmware that is working and the version that stops working?

Thank you for adding a bit of clarity to this issue too!!

[Imperilled]

@george1421 We have 30 iMac 14,1.

Don’t work :
ROM : IM143.0118.B14
SMC : 2.17f7

Work :
Rom : IM143.0118.B01
SMC : 2.17f2

another work :
Rom : IM143.0118.B13
SMC : 2.17.f7

[george1421]

@Imperilled thank you for helping us draw a clear line in the sand between working and not working!!

[Imperilled]

@george1421 if it can help. I boot on snp.efi. ipxe.efi never working on my machines.

[dfuriet]

My iMac14,1 : (Dont work)

ROM : IM141.0118.B14
SMC : 2.14f24

[dfuriet]

Any news for ipxe problem ?

[Tom Elliott]

@dfuriet have you tried the latest version of fog? I don’t expect any difference but ipxe has pushed a few updates since 1.3.0 released.

[Sebastian Roth]

@dfuriet @Imperilled Ok, I got some new advice from the iPXE devs. Debugging the actual driver issue won’t be easy and will therefore take too many round trips of “try this binary and report again”.

Nevertheless we ought to try out using the SNP binary (debug enabled - DEBUG=snp:3,nii:3 to start with). So find 01_snp.efi here. Just give it a try and post pictures or video. Make sure when you take those to place the camera or phone on a stack of books in front of the screen so we have a good picture.

[Sebastian Roth]

Just cross-linking this here: https://forums.fogproject.org/topic/10615/ipxe-booting-possibly-broken-on-os-x-sierra-update

[Imperilled]

@sebastian-roth Just saw your message ! I will try next week