Windows 7 : universal image with Postdownload script : issues

george1421

@Jonathan-Cool said in Windows 7 : universal image with Postdownload script : issues:

I tried after move the files in the good folder … and it’s works !

So it WAS the french guys fault…

Good job finding the issue!!

For your domain join, did the network adapter drivers load correctly? I have seen the no network thing cause a problem. This was on an intel nuc where the network drivers where not signed properly and you must accept the unsigned certificate for windows to load the drivers. I’m not saying this is your case now, only one place to check.

Jonathan Cool

You right, it’s was me …
But, the script contained a little typo, remember
And now, i understood why the domain fail … simply because i CTRL+C for debug … and after, i rebooted the computer … but, the hostname changer process didin’t run ! And i has a bad hostname …
I just want to thanks all of you for your help.
With this post, i understood many thinks and i improve myself day after day
I’m very happy to learned news features with FOG and new knowledge
It’s solved !

PS : this script works with Windows 10 ?

Tom Elliott

@Jonathan-Cool Ideally yes. But won’t know until it’s tested.

Jonathan Cool

Hi,
It’s me again …
I just need a precision about drivers : in this case, for Win7x64 and a HP820G3 (seem to be the same problem for Win10x64) : after the deploy and the unique reboot to join the domain, i can see in “Manage Device”, two “other” devices.

IF I right-click on theses devices, update Drivers … and choose the C:\Windows\DRV location, Windows “finish” the installation.
Why Windows can’t do this installation just after the deploy ?
Is it a signature problem with theses devices ? (Wifi and Display Audio Driver).
This problem break my dream of a Golden Full-automated Windows Image

george1421

@Jonathan-Cool It is possible that these two devices are hidden behind another device. I am just giving a random example.

Its possible that the wifi and audio chips on the motherboard are connect via a usb3 controller on the motherboard. You will not be able to see or load the drivers for the wifi or audio until the driver for the usb3 controller is loaded. The driver load process is only one pass (my guess). In that once it installs all known drivers it doesn’t look a second time for new devices that show up because the device in front was loaded.

It is hard to explain but I see it perfectly in my mind…

So what can you do?

This is just a guess, you can try in the setupcompleted.cmd file run DISM to force the drivers to load for all missing ones.

something like: dism /online /add-driver /driver: "c:\windows\drv"

But I have to warn this is only a guess. I have not had to do this my self. We only buy Dells and they work every time, no funny business.

Jonathan Cool

Hi,
Thank you @george1421
After some tests, it seem to work but not at 100 per cent.
What i did :
On the Win7x64 Vbox image :

add a script SetupComplete.cmd with this line :
dism /Online /add-driver /driver:C:\Windows\DRV /Recurse

I reUP the image on FOG server and tried on the 820G3 : it’s seem to work ! … but … the domain jonction seem to be broken.

I said “What is going on now ???”
I tried the same image on the same computer (820G3) and … same result.
I tried the image on the Opti7010 and … same resultat : the domain jonction feature didn’t work anymore.
I said “I am going crazy ?”
I Googled this fact … and i find some answers (on this link : https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_with_Sysprep)

     Disable FOGService: Windows Control Pannel -> View by Small Icons -> Administrative Tools -> Services -> Right click FOGService -> Properties -> Startup Type -> Disabled
Re-enable FOGService post-imaging:

Create the below file.

C:\Windows\Setup\scripts\SetupComplete.cmd

Place these lines within the file, and then save.

sc config FOGService start= auto
shutdown -t 0 -r

Well, if i add theses lines on my SetupComplete.cmd, it’s will work this time (Drivers AND domain jonction) ? Or i am in the wrong way ?

george1421

@Jonathan-Cool There is two ways to have the target computers to connect to domain.

Have unattend.xml do this. You must provide the domain connection information in your unattend.xml. I do it this way because we have a complicated OU structure and we I have some scripts in the post install that decide where (physical location) the target computer is being installed and type of computer (desktop, laptop) to calculates the OU where the computer will exist. Once the target OU is calculated the unattend.xml file is updated using a sed expression. Then during OOBE, windows setup connects the computer to the domain.
Have the fog client connect the computer to the domain. To do this, you must install the fog client into your reference image but disable the service. You must disable the service to keep the fog client from starting too early in OOBE in the windows setup process. Then use the setupcomplete.cmd batch file to re-enable the fog client service. This is the script you posted below. You must also have the fog client options enabled in the FOG web gui.

Jonathan Cool

Hi,
I used the 2nd method but, in the fog.log on the client, error 1355 …
It’s strange because, with an other image without any SetupComand.cmd and a classic install of FOG Client into the image reference, it’s works.

I used the Global settings to set ID of my domain. It’s not a typo …

With the image using the SetupComplete.cmd, domain jonction feature fail …

I think Windows correctly reads the SetupComands.cmd because the first problem seem solved (Drivers Injection). But, after the reboot, in services, i seen “FOGService : Disabled”.

My SetupComplete.cmd :

rem Injection des pilotes avant le premier Login Screen
dism /Online /add-driver /driver:C:\Windows\DRV /Recurse

rem Demarrage du service FOG avant le premier Login Screen
sc config FOGService start= auto
shutdown -t 5 -r

george1421

@Jonathan-Cool So your current problem is that the fog service is not turning back on in the setupcomplete.cmd?

What happens if you change the order in the setupcomplete.cmd file. Make the sc command come first maybe dism is doing something right, but causing the sc command to fail. The sc command looks right and should work.

Jonathan Cool

2 side problems with SetupComplete.cmd :

the fog service is not turning back on
IF i turn the service at “start” manuelly, the domain jonction feature fail with error 1355

I have not theses problems without SetupComplete.cmd.

I tried to put the dism command-line in second and the sc config in first … same result.
Strange

Now, i ask my self if the SetupComplete is really executed …

Edit : i will try this script :

mkdir C:\TestSetupComplete
sc config FOGService start= auto
dism /Online /add-driver /driver:C:\Windows\DRV /Recurse /ForceUnsigned
shutdown -t 5 -r

george1421

@Jonathan-Cool I would also test from cmd prompt that sc config FOGService start= auto works as expected with your OS.

Jonathan Cool

@george1421 said in Windows 7 : universal image with Postdownload script : issues:

@Jonathan-Cool I would also test from cmd prompt that sc config FOGService start= auto works as expected with your OS.

@george1421 Yes, it’s works. I already tried

Jonathan Cool

@Jonathan-Cool said in Windows 7 : universal image with Postdownload script : issues:

2 side problems with SetupComplete.cmd :

the fog service is not turning back on

IF i turn the service at “start” manuelly, the domain jonction feature fail with error 1355

I have not theses problems without SetupComplete.cmd.

I tried to put the dism command-line in second and the sc config in first … same result.
Strange

Now, i ask my self if the SetupComplete is really executed …

Edit : i will try this script :
mkdir C:\TestSetupComplete
sc config FOGService start= auto
dism /Online /add-driver /driver:C:\Windows\DRV /Recurse /ForceUnsigned
shutdown -t 5 -r

And now, the feedback … :

“mkdir C:\TestSetupComplete” : no folder was created …
sc config FOGService start= auto : FOG is always disabled
dism : maybe it’s good because i have no drivers problems
shutdown : just after the deploy, i not sure if the computer really reboot …

george1421

@Jonathan-Cool Your source media used to create your reference image, is that oem or vlk?

If its OEM I can understand why it not work.

First of all from the legal side M$ EULA for OEM media doesn’t allow for system reimaging if you alter the media at all. You can reimage using oem media as long as its from the original OEM dvd unaltered. This is a Microsoft requirement and not anything to do with fog. For imaging you must use the VLK media and VLK license.

Since OEM media license does not allow imaging you should stop now and get the properly licensed media.

I have heard of people using OEM media (against the MS EULA) for imaging. I think they called the setupcomplete.cmd file from the unattend.xml file using the first run section. But again that is only what I heard and never tried.

Jonathan Cool

@george1421 I read the OEM / VLK things.

After a “slmgr -dli”, i think i have a VLK license :
In “Description”, i can see “VOLUME_KMSCLIENT channel”.
And, the product number not start by “OEM” …

Source : http://mywindowshub.com/determine-windows-license-type-oem-retail-volume/
PS : we used a KMS Server to activate all Win7 in our office.

Jonathan Cool

Hm, maybe i did a misktake.
The FOG documentation said : “f you plan to use Sysprep before image capture and are also planning to use the FOG Client” … but, i never use the “Sysprep.exe”.
On my Vbox, i just

create the SetupComplete.cmd with the script*lines
disable FOG
upload the image on FOG

On client, i just donwload the image …

george1421

@Jonathan-Cool said in Windows 7 : universal image with Postdownload script : issues:

Hm, maybe i did a misktake.
The FOG documentation said : “f you plan to use Sysprep before image capture and are also planning to use the FOG Client” … but, i never use the “Sysprep.exe”.

Well I guess that explains it right there. Without sysprep your drivers will not import and setupcomplete.cmd will not run. Shame on you for not following the rules…

Jonathan Cool

Oh … i’m really sorry for this mistake.
In fact, i realized some tests with Sysprep before to know the SetupComplete.cmd.
On Win10, I created an unattend file for the registry hack but … after deploy, i alway seen the OOBE screen. At this time, i said “What the hell with this screen ?” and … went back to Windows 7 for tests. Before THIS mistake, i didn’t understand the link with Sysprep and the SetupComplete.cmd but now … i think I understand
Today, i will try some tests with Sysprep.
But, just to understand, why the domain jonction feature is broken if i have a SetupComplete.cmd in the Windows\Scripts\ folder ?
You say “SetupComplete will not run” … Maybe it’s totally another problem … ?

Jonathan Cool

Hello.
After some new researches, i found informations about sysprep.
And I discovered new issues : the unsigned drivers.
In my first attempt, I had many error during Sysprep causing by unsigned drivers. Same error on 820G3, Optiplex7010 & HP8000.
Well. I found the solution : in my reference image and before the Sysprep op, i installed two importants updates : KB2685811 & KB2685813.
After a reboot, i sysprep /generalize /oobe /shutdown the image (I took a snapshot before).
And i retry with theses computers : no error during the sysprep
And i can confirm, the SetupComplete ran : after the deploy, i can confirm :

the FOGService is started
drivers are OK (excepted ACPI for DELL but i will fix that later)
BUT the domain jonction fail … for all computers … error 1355.

I didn’t use any unattend file … after the deploy, I answer at the questions.
There is a link about the unattend file and the FOG Domain jonction feature ?

george1421

@Jonathan-Cool Use this: http://windowsafg.no-ip.org/

Windows 7 : universal image with Postdownload script : issues

158

12.0k

17.3k

155.2k