Deploying Single Snapins to Group All
-
@MarkusK Why not just make a pack and perform them independently
-
@MarkusK The methods 1.2.0 worked, but were EXTREMELY slow to perform.
There are many changes between 1.2.0 and 1.3.X. I will see if I can maybe make it work, but they’re not working even remotely close to how it was done in the past. (This is intentional.)
-
@MarkusK I recommend you simply wait until there are no active imaging tasks before you create the snapin task, also you may have some luck with using a scheduled task for this
-
@Junkhacker I have no imaging tasks running during the creation of snapin tasks. Scheduled tasks can be sumitted, but never run.
-
@MarkusK Snapins are also considered “taskings”.
So, if you “schedule” single snapin, each of the hosts in the group now suddenly have a “tasking” in the tasking table (even though it’s not an imaging task).
This is the “tasking” he’s referring to.
-
So, I’ve updated to enable the usage of groups to deploy single snapins properly now. Please see:
https://github.com/FOGProject/fogproject/commit/83d189a4de1017eedb8266b6630f10b73bbde4d9
If you must have/see this now, please switch to the github working branch. I’m not considering this a “feature” as it had existed in the past. I’m not considering this a bug because it did require a whole new logic flow to ensure tasking can be done as expeditiously as possible.
Because of the testing I’ve also moved the tasking submission button to display before the list of hosts in the tasking (as I don’t like scrolling to the bottom of the page just to submit my form element here).
Hopefully this fits the bill for what you needed/wanted properly.
-
@Tom-Elliott Thank you very much for effort!
I moved to the working branch and installed it. After the update I was no longer able to login. I reset the password, but this didn’t help. So unfortunatly I couldn’t test your changes.
I really would like to see this in action, because deploying different snapins to groups is one of my main workflows.
Any chance you can help me testing this?
-
@MarkusK please repull and try again. I meant to remove a “testing” element that I found a similar problem but had reset for other reasons. Readded and pushed.
-
@Tom-Elliott Thanks. I moved to 1.4.0-RC-3. I now can submit several Single Snapins to a group. There’s just some strange behaviour. The first time i submit a single snapin to a group with 100 clients, I can see 100 Snapin Task under Task Managment…Active Snapin Tasks. The second time I submit a Single Snapin to 100 clients, there are only 2 Snapin Tasks created. When I repeat the last step, aprox. 20 Snain Tasks are created. I somehow also expect 100 Single Snapin Tasks under Task Managment…Active Snapin Task. When I click Task Management…Active Tasks… I only get a white page.
-
@MarkusK The strangeness of what you’re seeing seems to be odd for sure, but not the end of the world right now I suppose.
Can you provide your apache error logs after going to the Active Tasks page? When pages go white as you’re describing it usually indicates a syntax issue, or there was a memory usage issue. If it is syntax related, chances are it will point us to the issue so I can provide a fast fix for the problem.
-
@Tom-Elliott I pulled and updated my installation again. Now I do no longer reproduce the blank page on Active Tasks page.
The first problem I have still exists. I can submit a Single Snapin to a group. The Snapin Tasks are showed on the Active Tasks page. I can submit another Single Snapin to the same group. There are no error messages, but the second Single Snapin does not show up under Active Tasks page. I only see the Tasks for the first submit.
-
-
@MarkusK have you updated?
-
@Tom-Elliott It’s maybe two weeks ago since. Should I give it another try?
-
@MarkusK Sure. Just make sure you’re on dev-branch.
-
@Tom-Elliott Thanks, I’ll give dev-branch a try next week.
-
@Tom-Elliott I upgraded to
Running Version 1.4.0
SVN Revision: 6069but the problem is still there. The second time I submit a single snapin to the same group, there is no Task visible under “Active Snapin Tasks”. Only the first time I submit a single snapin, the Tasks are created.
Looking for the missing tasks, I found out, that there are tasks visible under “Active Tasks”, but the Image field is empty.
-
@MarkusK Why would “image” be visible or not?
Essentially, the tasks link into a snapin job. Those jobs are what are used to determine what’s available for the host to use.
Either it’s working, or it’s not working.
-
@Tom-Elliott I did some more tests. All snapins deploy to the host, but they are not correctly displayed under “Active Tasks” or incomplete under “Active Snapin Tasks” (The Image name is missing, when submitting a single snapin task to a group".
-
@MarkusK the image name is not important if the tasking is a snapin tasking.
