mounting /images failed: Connection timed out
-
-
Are both set to fsid=1?
But that’s not permissions either.
-
@sjensen
ls -la /images
andls -la /images/dev
-
-
@sjensen THen my other question, what is the exact output of
cat /etc/exports
Please don’t screen shot and leave a “part” of it out this time?
-
@Tom-Elliott for reference this is what my fog server has (note the fsid is different for each export [share]):
pi@pi01:~ $ cat /etc/exports /images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0) /images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)
-
@george1421 What does that affect? Should I change it?
-
@sjensen I need to see it.
/images should have FSID of 0
/images/dev should have FSID of 1.If you must change these values for other reasons, they cannot be the same, and they should be “iterative”
-
@sjensen said in mounting /images failed: Connection timed out:
@george1421 What does that affect? Should I change it?
In a word, please show us your cards first. Then we will tell you if you won or not.
-
-
Please give a shot at changing the fsid’s so they are in order:
/images with fsid 0
/images/dev with fsid 1.Also, please give a try at:
sudo touch /images/.mntcheck sudo touch /images/dev/.mntcheck sudo chown -R fog:root /images sudo chmod -R 777 /images sudo exportfs -a sudo service nfs-kernel-server restart sudo service ufw disable
-
@Tom-Elliott Ok I did what you asked. Should I try to upload an image again?
-
Yes please.
-
@Tom-Elliott same result…sorry
-
@Tom-Elliott yesterday I did a kernel update would that have broken anything? I did it via terminal.
-
@sjensen The fact that it’s saying timeout leads me to think the the connection is unable to reach the server.
-
@Tom-Elliott Possibly schedule a debug deploy and then check what FOS is seeing?
-
@george1421 Sure? I don’t know. This seems awefully fishy and we aren’t getting anywhere.
The stuff all points that something else is blocking the connection. Maybe the subnet the systems are booting from (and being issued IP addresses) is not allowed to request data?
-
@sjensen said in mounting /images failed: Connection timed out:
@Tom-Elliott yesterday I did a kernel update would that have broken anything? I did it via terminal.
I guess we need to collect a little more information here then.
What version of FOG are you using?
What version of kernel did you just update to?
Why did you update it?
What hardware are you trying to capture? (manufacturer and model)
Is the FOG server and target computer on the same subnet? (I think you already answered this)What you are experiencing is not typical with FOG. We need to identify where the gap is. It appears the target computer has network access, but it doesn’t have nfs access to the fog server(??). You can mount the nfs shares locally on the fog server, so the fos engine should be able to do the same. You have confirmed that the IP address of the FOG server matches the IP address from the error page. There is something going on here that is for sure.
-
@Tom-Elliott I dont think this makes a difference, but my fog server is a virtual it is on one vlan and my host is on another vlan. I can connect to the web interface for Fog with no issues from my computer which is on another vlan.