Lenovo Thinkpad Yoga 260 w/Lenovo ThinkPad USB 3.0 Ethernet Adapter FRU:03x6903

[sudburr]

It looks like finding a way to .KPXE USB boot is moot since playing directly with the DHCP results in:

undionly.pxe
= fails through to hdd

undionly.kpxe
= hangs at iPXE initialising devices …

undionly.kkpxe
= hangs at bg.png 25%

ipxe.pxe , ipxe.kpxe , ipxe.kkpxe
= only looks for link up on net0 (the onboard nic) twice

ipxe.krn
= hangs after loading

realtek.pxe , realtek.kpxe , realtek.kkpxe
= exits after loading

[Wayne Workman]

@sudburr said in Lenovo Thinkpad Yoga 260 w/Lenovo ThinkPad USB 3.0 Ethernet Adapter FRU:03x6903:

I’d like to test .*pxe booting by USB. Is this possible and how?

It’s possible. ipxe’s website has a quickstart area that has an image you can burn to cd or USB, and you can boot from that. Of course, in the chainloading area you could replace that with the file on your fog server /tftpboot/default.ipxe and I’m also sure you could replace the actual file they are using with one from the FOG server too so that it just looks for default.ipxe on it’s own.
http://ipxe.org/

[sudburr]

More interesting news.

Booting Legacy by Network

undionly.pxe
= fails through to hdd

undionly.kpxe
= hangs at iPXE initialising devices …

undionly.kkpxe
= bg.png 25%

ipxe.pxe , ipxe.kpxe , ipxe.kkpxe
= only looks for link up on net0 (the onboard nic) twice

ipxe.krn
= hangs after loading

realtek.pxe , realtek.kpxe , realtek.kkpxe
= exits after loading

Booting UEFI by Network

ipxe.efi , ipxe7156.efi
= good

realtek.efi , realtek7156.efi , snp.efi , snp7156.efi , snponly.efi , snponly7156.efi
= hangs after gateway ip display

=-=-=-=-=-

Booting UEFI by USB

ipxe.efi , ipxe7156.efi , snp.efi , snp7156.efi
= good

realtek.efi , realtek7156.efi , snponly.efi , snponly7156.efi
= doesn’t detect nic; dhcp fails

=-=-=-=-=-

It’s interesting to see the very different behavior of USB launching vs network.

[sudburr]

@Wayne-Workman But what I’m really looking for is a FOG-specific answer to building a Legacy Boot USB.

To build a UEFI USB it’s a simple matter of formatting a key to FAT32, active, then copy your .efi of choice to /efi/boot/bootx64.efi.

Is there an equally simple solution for a .*pxe and what is it?

[Wayne Workman]

@sudburr said in Lenovo Thinkpad Yoga 260 w/Lenovo ThinkPad USB 3.0 Ethernet Adapter FRU:03x6903:

Is there an equally simple solution for a .*pxe and what is it?

I can’t say I’m an expert on this, and @george1421 probably knows how to do this already. But I would think you’d create a partition on a usb drive that is marked as bootable using fdisk and then format that partition fat32, and then take those for files from ipxe’s image and put them there, and just modify them as needed. Like changing out the kernel file with the desired rom file, and replacing the script with the stuff from default.ipxe.

[sudburr]

Alrighty… Murphy just showed for work.

All four good USB-based .efi solutions now hang .

bzimage... ok
init.xz... ok
then nothing

grrr … argh

[Tom Elliott]

@sudburr And if you use the 7156 labelled file?

[Tom Elliott]

I suppose you could also try working-RC-26 files. I updated ipxe files yesterday I believe.

[george1421]

@sudburr I guess I would have to ask the question, how many of these weird systems that will not pxe boot do you have to deal with? The answer may be to just dig a hole and fill it with these devices.

For efi devices building a boot drive is pretty simple. It would also be interesting to see if you can skip iPXE entirely by using grub to boot into FOS via https://forums.fogproject.org/topic/7727/building-usb-booting-fos-image

[sudburr]

@george1421 More than you can shake a several dead cats at.

[george1421]

@sudburr Have you tried the magical 7156 version that Tom talked about? That actually is a legacy iPXE kernel that seems to work well with the surface pros.

[sudburr]

@george1421 Yes, scroll up to the `More interesting news’.

[sudburr]

@Tom-Elliott Already have. Scroll up to the `More interesting news’.

[sudburr]

And now… the 4 magic USB .efi solutions are working again. o_O

[george1421]

@sudburr ok so I’m a bit confused. It appears that you can network efi boot these devices. Is your goal to legacy boot these devices?

I can understand why the usb booting would work over network booting the same iPXE kernel if the netboot code is fault in the yoga’s firmware. We have seen the hand-off between firmware and iPXE fail on some of these lenovos in the past.

[sudburr]

Just trying to find the path of least resistance given our environment. The 4 USB .efi solutions are now working again. Murphy has passed out in the corner.

[sudburr]

@george1421 Like I mentioned above, the Lenovo ThinkPad 13 works perfectly with the same BIOS setup. No need for the USB solution that the Yoga 260 requires for UEFI/Legacy dual booting. I fully believe the problem is entirely with the firmware on the Yoga.

Both work better now than they did 4 months ago with the BIOS version available then.