fog.drivers script will not run correctly in postdownloadscripts

george1421

@THEMCV Well, hell now I understand where the /fog is coming from. That is NOT in the original script I was referencing. https://forums.fogproject.org/topic/4278/utilizing-postscripts-rename-joindomain-drivers-snapins/29

THEMCV

@george1421 I feel like an idiot. I got them jumbled up in my early stages. Bleh. Okay, so should I take the script that is from your link and use it or do as @Quazz suggested and just include a call to it?

@Wayne-Workman: The message from removing the >/dev/null 2>&1

This rsync lacks old-style --compress due to its external zlib. Try --zz. Continuing without compression.

rsync:` write failed on "/ntfs/Windows/DRV/OptiPlex 980/x64/chipset/PP0H5-A00-00.WUB7/JasperFo.uno": No space left on device (20)
rsync error: error in file IO (code 11) at receiver.c(393) [reciever=3.1.2]

Which doesn’t make much sense as the device does have space.

Quazz

@THEMCV Either works, I personally prefer having a more modular approach because it makes it easier to expand and debug, but it’s mostly personal taste.

THEMCV

@Quazz I just have

. ${postdownpath}fog.drivers

Is that good?

Quazz

@THEMCV Yes, that’s fine.

THEMCV

@Quazz Okay, it’s in there. No change. Still acting like there’s no space left on the device which isn’t true at all. The image is only ~15GB.

Quazz

@THEMCV I’d have to guess your ntfs isn’t being mounted correctly on the client. Most likely it’s trying to rsync to the fog client (which is residing in RAM) which will of course not have space to write to.

How do your scripts look like now?

george1421

@THEMCV OK what I think I would do at this point is insert a debug pause after the error generator.

#/fog/Drivers/Win7/Latitude E5410/x86
rsync -aqz "$remotedriverpath" "$clientdriverpath" >/dev/null 2>&1
[[! $? -eq 0]] && handleError "Failed to download driver information"

debugPause

After the handleError line after the rsync.

Then go back and schedule a deployment to this computer but pick the debug deployment checkbox.

Then pxe boot the target computer. It will print out a bunch of text but drop you to a command prompt. From there key in fog This will single step you through the deployment process. When you get to the point of the error press crtl-C to exit the installer script. This will leave you at a linux command prompt. From there we should be able to check the disk size and what not.

george1421

Wait, I just found a flaw in the script from Lee’s page (note: not a script Lee created though) for Windows 10, for Win7 its correct since the last partition on disk 0 is the windows partition.

        getPartitions $hd
        for part in $parts; do
            true
        done
        dots "Mounting partition $part"

This loosely gives me the last partition for Win10. But that is NOT the windows partition. In the case of the system I’m testing there are 3 partitions, but partition 2 is the windows partition. I’m not using rsync but just regular copy that threw the error.

I think more intelligence needs to be built into this loop, where it should check to see if the /windows directory exists before exiting.

Quazz

@george1421 I personally use

echo -n " * Mounting Windows File System...................";
if [ -b /dev/sda4 ]
 then
    mount.ntfs-3g /dev/sda4 /ntfs 2>/tmp/mntfail
 else
    mount.ntfs-3g /dev/sda2 /ntfs 2>/tmp/mntfail
fi

Logic: If the system has 4 partitions (or more), then (assuming singleboot windows) it is a GTP installation and Windows is on partition 4. Otherwise it’s a MBR installation and it will generally be on partition 2.

This is incredibly over simplistic, however and only reliably works on clean microsoft images, not OEM or the like.

A loop function would need to be created to check for the windows folder or something.

george1421

@Quazz I had a similar simple conditional test, until I ran into a NVMe drive with its crazy disk naming of /dev/nvme0n1[partition]

Quazz

@george1421 Good point, we mostly deal in refurbished hardware and my script is non critical, so it hasn’t been a big deal for me so far.

george1421

@Quazz Unless the @Senior-Developers can come up with a brilliant way to find the windows partition, I think we are going to have to mount each partition, in order, until we find one that has the /Windows directory on it. That is kind of an expensive way to do that (in CPU time).

Quazz

@george1421 We can already reduce that by selecting only the NTFS partitions to try though.

PARTITIONS=$(df -T | grep ntfs | awk '{print $1}')

edit: I just realized this may not work on unmounted partitions, I’ll correct in a bit.

Tom Elliott

@george1421 There’s already a way.

It sounds like the partitions aren’t being processed based on:

@THEMCV said in fog.drivers script will not run correctly in postdownloadscripts:

@Quazz I did not, no. I think I found the /fog reference though and might be our problem.

I think it might be my postdownload script itself.

#!/bin/sh
## This file serves as a starting point to call your custom postimaging scripts.
## <SCRIPTNAME> should be changed to the script you're planning to use.
## Syntax of post download scripts are
#. ${postdownpath}<SCRIPTNAME>

if [ $osid == "5" -o $osid == "6" -o $osid == "7" ]; then #only handling Win7/8/8.1
    clearScreen;
    mkdir /ntfs &>/dev/null
    ntfs-3g -o force,rw $part /ntfs #mount image (remember this is mounting partition [U][B]after[/B][/U] new image is deployed)
    mkdir /fog &>/dev/null
    mount -o nolock,proto=tcp $storageip:/fog/ /fog #this is a share created on server under /fog which contains drivers, software etc.. (just add /fog to exports but you could use existing location i.e. /images and if you do, do not ne$
    dots "Mounting Device";
    if [ "$?" = "0" ]; then
        echo "Done";
        . ${postdownpath}fog.drivers # run fog.drivers script
        umount /ntfs; # unmount when all is done :-)
    else
        echo "Failed To Mount Device";
        sleep 30;
    fi
fi

@Wayne-Workman I removed it and am testing it now.

The ntfs-3g -o force,rw $part /ntfs is using the last partition FOG processed instead of looping the partitions separately.

If it were me (psuedo code here) I’d end up doing something like:

        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Mounting partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    if [[_! $? -eq 0_]]; then
                        echo "Failed...Trying next partition"
                        continue
                    fi
                    if [[_! -d /ntfs/windows && ! -d /ntfs/Windows && ! -d /ntfs/WINDOWS_]]; then
                        echo "Done...no valid Windows directory found"
                        umount /ntfs
                        continue
                    fi
                    echo "Done"
                    break
                    ;;
                *)
                    echo " * Partition $part not NTFS filesystem"
                    ;;
            esac
        done

Of course this isn’t tested, and just thoughts through my head. Replace the _ with spaces.

george1421

Tom was able to do a bit of magic below. I tested it in my dev environment and it works to correctly find the windows partition. It needs a bit of cleanup work (hiding some unnecessary messages) but all in all it w is a brilliant bit of code.

THEMCV

@george1421 said in fog.drivers script will not run correctly in postdownloadscripts:

@THEMCV OK what I think I would do at this point is insert a debug pause after the error generator.
#/fog/Drivers/Win7/Latitude E5410/x86
rsync -aqz "$remotedriverpath" "$clientdriverpath" >/dev/null 2>&1
[[! $? -eq 0]] && handleError "Failed to download driver information"

debugPause
After the handleError line after the rsync.

Then go back and schedule a deployment to this computer but pick the debug deployment checkbox.

Then pxe boot the target computer. It will print out a bunch of text but drop you to a command prompt. From there key in fog This will single step you through the deployment process. When you get to the point of the error press crtl-C to exit the installer script. This will leave you at a linux command prompt. From there we should be able to check the disk size and what not.

Okay, done. running the command df I get:

Filesystem                   1K-blocks                Used        Available      Use%      Mounted on
/dev/root                        99459               99440              0         100          / 
10.4.200.150://images/        464307200             215944192        224754688    50          /images

I will run @Tom-Elliot’s code and report back.

THEMCV

@Tom-Elliott So this goes into fog.postdownload alone or conjoined with the previous script from ntfs-3g -o force,rw $part /ntfs down?

@Quazz My scripts currently:

#!/bin/sh
## This file serves as a starting point to call your custom postimaging scripts.
## <SCRIPTNAME> should be changed to the script you're planning to use.
## Syntax of post download scripts are
#. ${postdownpath}<SCRIPTNAME>

. ${postdownpath}fog.drivers

and

#!/bin/bash
ceol=`tput el`;
manu=`dmidecode -s system-manufacturer`;
case $manu in
    [Ll][Ee][Nn][Oo][Vv][Oo])
        machine=$(dmidecode -s system-version)
        ;;
    *[Dd][Ee][Ll][Ll]*)
        machine=$(dmidecode -s system-product-name) #pruduct is typo, just realized sorry :(
        ;;
    *)
        machine=$(dmidecode -s system-product-name) # Technically, we can remove the dell one as it's the "default"
        ;;
esac
[[ -z $machine ]] && return #assuming you want it to break if it is not lenovo or dell?
machine="${machine%"${machine##*[![:space:]]}"}" #Removes Trailing Spaces
system64="/ntfs/Windows/SysWOW64/regedit.exe" # sloppy detect if 64bit or not
[[ ! -f $system64 ]] && setarch="x86" || setarch="x64"
#############################################
#this is not section necessary needed, it's just to make the path "human readable"
#rather than using osid for filepath
case $osid in
    5) osn="Win7" ;;
    6) osn="Win8" ;;
    7) osn="Win8.1" ;;
    9) osn="Win10" ;;
esac
#############################################
dots "Preparing Drivers"
# below creates local folder on imaged pc
# this can be anywhere you want just remember
# to make sure it matches throughout!
clientdriverpath="/ntfs/Windows/DRV"
remotedriverpath="/images/drivers/$osn/$machine"
[[ ! -d $clientdriverpath ]] && mkdir -p "$clientdriverpath" >/dev/null 2>&1
echo -n "In Progress"
#there's 3 ways you could handle this,
#driver cab file, extracted driver files or both
#so on the server put extracted driver files to match below folder tree
#i.e. Model Latitude E5410, Windows 7 x86 image would be:
#/fog/Drivers/Win7/Latitude E5410/x86
echo
echo "rsync -aqz \"$remotedriverpath\" \"$clientdriverpath\""
echo
rsync -aqz "$remotedriverpath" "$clientdriverpath"
[[ ! $? -eq 0 ]] && handleError "Failed to download driver information"

debugPause
#if you wanted to use driver.cab use this line below.
#i.e. /fog/Drivers/Win7/Latitude E5410/E5410-Win7-A07-KTT4G.CAB
#cabextract -d "$clientdriverpath" "$remotedriverpath/*.CAB" >/dev/null 2>&1

#if you wanted to mix both cab and extracted use these:
#rsync -aqz --exclude='*.CAB' "$remotedriverpath" "$clientdriverpath" >/dev/null 2>&1
#[[ ! $? -eq 0 ]] && handleError "Failed to sync cab and non-cab drivers"
#cabextract -d "$clientdriverpath" "$remotedriverpath/*.CAB" >/dev/null 2>&1
#[[ ! $? -eq 0 ]] && handleError "Failed to extract cab files"
#this next bit adds driver location on pc to devicepath in registry (so sysprep uses it to reference)
# remember to make devicepath= match the path you've used locally
#also do not remove %SystemRoot%\inf
#and to add more locations just use ; in between each location
regfile="/ntfs/Windows/System32/config/SOFTWARE"
key="\Microsoft\Windows\CurrentVersion\DevicePath"
devpath="%SystemRoot%\inf;%SystemRoot%\DRV";
reged -e "$regfile" &>/dev/null <<EOFREG
ed $key
$devpath
q
y
EOFREG
echo -e "\b\b\b\b\b\b\b\b\b\b\b${ceol}Done"; # this just removes "In Progress and replaces it with done :-)"

george1421

@THEMCV please stand by. I think I have a working solution based on tom’s script. I just want to make sure it doesn’t break anything else. I realize we are sending you in 10 different directions, because each has their own way to go about this.

We really need to get a wiki page built with a step by step.

THEMCV

@george1421 No problem.

That would be nice though. I had to jump through a few threads (which is a given sometimes!) and the wiki page for Auto Installing drivers didn’t seem as robust as the scripts that I had found.

But that’s how progress and the process work. One problem at a time and always improving.

fog.drivers script will not run correctly in postdownloadscripts

190

11.6k

17.1k

154.6k