PXE seems to work but Fog Cloning menu not displayed.
-
@jmcg said in PXE seems to work but Fog Cloning menu not displayed.:
@george1421 tcpdump is available on the server.
OK do the process I outlined in the previous post. You can either review the pcap with wireshark or I can.
What I’m suspecting is that another dhcp server is talking to the client that is where its getting the pelinux.0 file name and not undionly.kpxe.
-
@george1421 So, I ran the tcpdump (issue.pcap is the first capture). I can see that the fog server 192.168.1.16 is trying to get to a dhcp server (10.122.16.4) which the fog server cannot reach. The 10.122.16.4 server is the dhcp server for a LAN I have to connect to in order to have internet access for updates for fog, ubuntu, etc. At the time of the capture there is no physical connection to the 10.122 LAN, so I’m not sure why it is attempting to go to that server.
So, I issue a sudo dhclient -v -r eth0 on the fog server to release the dhcp lease. I then issue a sudo dhclient -v eth0 to get a new lease from the only connected dhcp server 192.168.1.1 .
I then ran a new tcpdump on the fog server and start up the dell laptop. that is the issue2… pcap . I look at that trace and I see that the fog server 192.168.1.16 is still trying to access the wrong dhcp server, which isn’t even connected to the server.
I tried to upload the .pcap files and I get an error that I don’t have enough privileges to do so.
-
@jmcg Can you upload that pcap to an external service like dropbox or google drive? If you use google drive make sure its world readable.
-
-
@jmcg ok looking at the first pcap.
I see a host 00:19:b9:61:fe:d7 requesting a dhcp address using a discover (frame 16)
Then 2 devices respond to it with an dhcp offer frame 17 and 18.
The first one is 192.168.1.16 who isn’t sending a next server address (dhcp option 66) but it is sending a boot file name of pxelinux.0 (ah ha!!).
The second one is 192.168.1.1 that is sending a next server of 192.168.1.16 with a boot file of undionly.kpxe.
Then a few frames down the client is sending an ack packet back to 192.168.1.1 to reserve its IP address.
Then I see the client 192.168.1.21 request and download pxelinux.0 from 192.168.1.16Except for 192.168.1.16 sending out a bogus dhcp offer confusing the client everything appears to be working.
I guess you need to answer the questions.
- Why do you have 2 dhcp servers on your network (192.168.1.1 and 192.168.1.16)
- 192.168.1.16 IS sending out pxelinux.0 for the boot file name
- 192.168.1.1 IS sending out the right next server 192.168.1.16 and boot file undionly.kpxe. (so running the dhcp server on the FOG server is just causing a conflict)
- If you would have used the filters I provided we would only see dhcp and tftp stuff and not things we shouldn’t see in your pcap. (you control the pcap file and probably should take it down once we are done debugging).
-
@george1421 Well I have to admit that I am confused about the dhcp server on 192.168.1.16, which is the fog server. I can not find an instance of it on the server, yet I see the dhcp offer in the pcap file. I looked for the isc-dhcp-server in the ubuntu server but can’t see it running nor can I stop it. So I am unsure what is running as a dhcp server on the 192.168.1.16. That needs to be cleared up first.
Any suggestions on how to determine what is going on?
-
@jmcg Did you load dnsmasq on that server?
Was that server setup specifically for FOG or was the server recycled?
-
@jmcg
service dnsmasq status;service dhcpd status -
@george1421 It was a new server. So, now I get to the FOG menu.
The issue was that I mikstakenly installed dnsmasq because part of the description (Using FOG with no DHCP server - but I am using dhcp just not on the FOG server) lead me to believe I needed it. But I only went looking for solutions when I couldn’t get to the FOG menu. The reason I couldn’t get to the FOG menu during iPXE was that I had the wrong file name in option 67. So, in my attempt to troubleshoot and apply possible fixes I caused another problem. So this issue is fixed. I have to remove dnsmasq service. The system seems to be fully functional.
Thank you for the assistance. Now to continue on with my project.
-
@jmcg I’m glad you have it worked out. That is why the pcap is so valuable so you can actually see what is going on in the wires and not just guess.
Good job, happy fogging (if that is a word).
