Unsure if these settings in FOG are correct
-
@george1421 hi george, i have run the packet analyser. Im no expert but after Line 16 where the client is asking for the file…it seems that there is no server defined and no file defined. I have uploaded the file. If you can point to what i might need to change?
I cant seems to upload the file. The website is saying i dont have sufficient rights…?
-
@pencils Is it possible to upload the file to a google doc and post the link here. We really need to see where the file name is missing.
Since you are using dnsmasq this should be sending the file name. I looked back through this thread and I did not see if you posted the dnsmasq config file. Would you post that here in a code block too?
-
https://drive.google.com/file/d/0B6FTHDLVGsEhdXU3c1NPZU1TQ0U/view?usp=sharing
thats the pcap file.https://drive.google.com/file/d/0B6FTHDLVGsEheXU1dHBYVHBxTDg/view?usp=sharing
Thats the conf file.Updated links.
-
@george1421 hi george, were you able to access the above links OK? any ideas?
-
@pencils I attempted but they wanted me to provide my google login to access them. You should make the public read only for a short time. I will not provide my credentials to look at them.
-
@george1421 sorry george. The links are now updated with full rights.
-
Google Drive is saying it’s not available at the moment?!??!?!
-
@Sebastian-Roth i just clicked it and worked for me?? this is frsutrating!!
-
@pencils Worked loading in a different browser… my issue.
The PCAP dump looks pretty good! DHCP is fine and I see the client requesting a file via TFTP. The filename is
undionly.0!! Did you copy that file as Tom suggested?sudo cp /tftproot/undionly.kpxe /tftproot/undionly.0 -
@Sebastian-Roth I agree, after looking at a dhcp booting process all weekend I can read the pcap like code from the matrix.
The requesting system is in BIOS mode so undionly is the proper boot kernel for it. I see the target requested the file size for undionly.0 from the tftp server at 192.168.1.133 with no second response from the fog server or no request for undionly.0 to be downloaded from the tftp server. This tells me the tftp server responded with “file not found” for undionly.0.