Lenovo Miix 700

arton

yes what i did fallow the command on the how to upgrade so they it sad to make a Dir under root name fog-project then run the download svn then i did run installfog.sh from that directory.
Now when i look under fogproject/packages/tftp/ I see

george1421

@arton that’s very strange why the tftpboot directory is that why. Your screen shot contains what I would expect in the /tftpboot dir

Did the fog installer run to completion? Please run the installfog script again. If you are using a Debian based Linux you will need sudo then installfog.sh.

arton

thank you i did run the install again now the tftpboot has all the files now i getting different error here is the picture

Wayne Workman

@arton Did the installer complete?

arton

yes it did finish completely

Wayne Workman

@arton What’s doing DHCP there? Did you follow the article I posted earlier? Do you hae PortFast enabled on your switch? Can you try to place a mini-switch between the computer and the building network?

arton

i dont see any post about port fast on network

Wayne Workman

@arton Can you answer the other questions please?

arton

yes i can put a mini switch between building network and pc i let y know the results

arton

here is the error

george1421

@arton This last picture is what I might expect to see from pxe booting a bios (legacy) system with undionly.kpxe (not an uefi boot, it doesn’t matter but just trying to set the context). Is this the case? I’m still getting the impression that your install is broken.

What I want you to do next is to (with a web browser) key in http://192.168.15.187/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00 and post the results here. Ideally this should display the FOG ipxe boot menu in its entirety (> 20 lines of stuff). If you get 3 or 4 lines and that is it, then we will need you to post (tail) the apache error log because something is broken.

Wayne Workman

The calls look good in the last picture, is the firewall on for the fog server? What OS is it running?

arton

#!ipxe
set fog-ip 192.168.15.187
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
iseq ${platform} efi && set key 0x1b || set key 0x01
iseq ${platform} efi && set keyName ESC || set keyName CTRL + A
prompt --key ${key} --timeout 3000 Booting… (Press ${keyName} to access the menu) && goto menuAccess || exit
:menuAccess
login
params
param mac0 ${net0/mac}
param arch ${arch}
param platform ${platform}
param username ${username}
param password ${password}
param menuaccess 1
param debug 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain -ar http://192.168.15.187/fog/service/ipxe/boot.php##params

Server is Ubuntu 14.04 LTS

george1421

@arton Just for clarity what were you trying to do when it created this menu? Were you trying to boot an unregistered device into the FOG iPXE menu or were you trying to deploy to this device?

The reason why I ask is that this menu isn’t complete. It has more lines than I expected but it isn’t what I expected. We may need to have the developers look at this.

I would have expected something like this based on the command I gave you

#!ipxe
set fog-ip 192.168.1.88
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://192.168.1.88/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0x00567a 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item mdtlti.x86 MDT LiteTouch x86 Boot
item winpe7a WinPE tester
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.88/fog/ consoleblank=0 rootfstype=ext4 loglevel=4
imgfetch init_32.xz
boot || goto MENU
:fog.memtest
kernel memdisk iso raw
initrd memtest.bin
boot || goto MENU
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.88/fog/ consoleblank=0 rootfstype=ext4 loglevel=4
imgfetch init_32.xz
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.88/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.88/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.88/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:mdtlti.x86
initrd http://192.168.1.88/fog/iso/LiteTouchPE_x86.iso
chain memdisk iso raw
:winpe7a
initrd http://192.168.1.88/fog/iso/winpe_amd64.iso
chain memdisk iso raw
:bootme
chain -ar http://192.168.1.88/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

Since you are running ubuntu can you tail the apache error log. I think its called error.log.
One last question, was this system upgraded or did you install it new?

arton

both times i run a upgrade I’m creating a new server Ubuntu 16.04 and reinstall from scratch

Wayne Workman

@george1421 I think he has hide menu enabled.

We have hide menu enabled, this is ours:

#!ipxe
set fog-ip 10.2.1.11
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
iseq ${platform} efi && set key 0x1b || set key 0x01
iseq ${platform} efi && set keyName ESC || set keyName CTRL + A
prompt --key ${key} --timeout 4000 Booting... (Press ${keyName} to access the menu) && goto menuAccess || sanboot --no-describe --drive 0x80
:menuAccess
login
params
param mac0 ${net0/mac}
param arch ${arch}
param platform ${platform}
param username ${username}
param password ${password}
param menuaccess 1
param debug 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain -ar http://10.2.1.11/fog/service/ipxe/boot.php##params

arton

yes we do gave hide menu enabled

Wayne Workman

@arton Are you sure the HDD exit type isn’t just set wrong for this device? Try Grub.

Lenovo Miix 700

206

11.6k

17.1k

154.6k