Rolling Reboot -- FOG Client AD issue

[Tom Elliott]

@Joe-Gill What I mean, 1 in 5 hosts fail to complete their taskings? Or 1 in 5 get stuck in reboot loop?

If the tasking is still present under the “active tasks” page (not active multicast) the reboot would cause those systems to boot into the Imaging side of things.

[Joe Gill]

@Tom-Elliott 1 in 5 get stuck in reboot loop AND they also are the ones that fail to complete taskings. I kill the taskings and reboot loop ceases and operations complete as normal.

[Wayne Workman]

@Joe-Gill apache error logs from the time at the end of imaging to when the reboots start happening would be very informative.

[Tom Elliott]

I’ve confirmed the non closing multicast task. I still don’t understand what you mean by “I kill the taskings” Which tasking are you referring to? The host’s individual tasking, or the multicast tasking?

THe non-closing multicast will be available for RC-5.

[Tom Elliott]

@Tom-Elliott and by that I mean will be fixed.

[Joe Gill]

@Tom-Elliott
Ok. So the fix I have is to cancel the active task for the problem host in task manager. Than, I go into the MYSQL database on the server and clear out the task there. I then stop and restart the multi tasking service. Then things seem to be fine for the next session.

@Wayne-Workman Here is the Apache2 Error.log file for today. I did notice their was a fatal error the day before. It appears that this same entry happened many times that day.

[Tue Jul 26 20:49:35.416710 2016] [:error] [pid 4097] [client 172.16.19.149:65194] PHP Fatal error:  Uncaught exception 'Exception' with message 'Window size must be g$
[Tue Jul 26 20:49:36.423986 2016] [:error] [pid 4100] [client 172.16.19.149:65197] PHP Fatal error:  Uncaught exception 'Exception' with message 'Window size must be g$
[Wed Jul 27 07:26:32.280481 2016] [:error] [pid 4201] [client 172.16.16.150:59389] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 07:26:48.354429 2016] [:error] [pid 4201] [client 172.16.16.150:59404] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 07:27:01.053034 2016] [:error] [pid 4201] [client 172.16.16.150:59417] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 07:36:57.647527 2016] [:error] [pid 7834] [client 172.16.16.150:60058] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 07:37:15.662213 2016] [:error] [pid 4206] [client 172.16.16.150:60082] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 07:37:28.563481 2016] [:error] [pid 4097] [client 172.16.16.150:60101] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 08:30:45.361208 2016] [:error] [pid 9327] [client 172.16.16.150:62604] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 09:10:51.246977 2016] [:error] [pid 4201] [client 172.16.16.150:64132] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 09:11:10.725368 2016] [:error] [pid 6575] [client 172.16.16.150:64148] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 09:11:19.335300 2016] [:error] [pid 7905] [client 172.16.16.150:64159] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 09:12:35.911531 2016] [:error] [pid 4101] [client 172.16.16.150:64236] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 11:16:54.796082 2016] [:error] [pid 4206] [client 172.16.16.150:52767] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 11:17:07.981127 2016] [:error] [pid 4201] [client 172.16.16.150:52780] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 12:58:17.660609 2016] [:error] [pid 11833] [client 172.16.18.89:49845] PHP Strict Standards:  Only variables should be passed by reference in /var/www/html$
[Wed Jul 27 15:01:59.879251 2016] [:error] [pid 13392] [client 172.16.16.150:62040] PHP Strict Standards:  Only variables should be passed by reference in /var/www/htm$
[Wed Jul 27 15:02:17.611327 2016] [:error] [pid 13023] [client 172.16.16.150:62056] PHP Strict Standards:  Only variables should be passed by reference in /var/www/htm$
[Wed Jul 27 15:53:39.483338 2016] [:error] [pid 4201] [client 172.16.16.150:63406] PHP Warning:  pack(): Type H: illegal hex digit K in /var/www/html/fog/lib/fog/fogba$

[Joe Gill]

@Developers

Well, I’m back at it again. I noticed that this issue also occurs on unicasts. I deployed several machines yesterday; pushing each machine as I added them to FOG. I had about half of those machines where the task never completed in the “Active Task” screen and went into reboot hell.

I had a snapin addon on these guys. I’m going to try re-pushing them without said plugin and see what happens.

Cheers,

Joe

[Tom Elliott]

@Joe-Gill please try updating too.

[Joe Gill]

@Tom-Elliott

Will do and I’ll update. It happens even without snapins running. But I’ll update and see if it continues.

Thanks!

[Joe Gill]

@Tom-Elliott

Well after an update, I still had 1 out of 4 clients do the rolling reboot. It’s interesting because the one that was stuck, was a different model. I"m wondering if their isn’t a driver issue with the image as it’s a universal image. The only funny thing is that, again, after you delete the task from the active task list, things proceed as they should. AD add works, drivers seem fine, everything is happy. So I’m still a little stumped. LOL!

If you’d like any logs just say so and I’ll post whatever you need.

I’ll be away from the office tomorrow but I’ll probably still check in some time. I can always remote in and send you something.

Thanks!

Cheers,

Joe

[Joe Gill]

@Tom-Elliott
@Developers

Well I am currently running version RC-8. I am still having the rolling reboot issue with one of my images. I am deploying a new image this morning on a few remaining machines. I’m wondering if it’s not my image instead of FOG. In the image I’m deploying this morning I have changed the order in which the SetupComplete finishes. I was having SetupComplete install AV first and then do some other tasks… What I failed to realize is that this causes the machine to reboot before the script finishes and it does not let FOG finish. I had a similar issue with snapins not finishing because of a reboot. If the new image seems to resolve this, I’ll be sure to let you all know.

Thanks for all of the support!

Cheers,

Joe Gill

[Wayne Workman]

@Joe-Gill said in Rolling Reboot -- FOG Client AD issue:

What I failed to realize is that this causes the machine to reboot before the script finishes and it does not let FOG finish.

Bingo.

If it wasn’t your setup, we’d be having a dozen new threads every day about the same issue.

[Joe Gill]

@Wayne-Workman
@Tom-Elliott
@Developers

The new image seems to work flawlessly, like it should! I’ll have to adjust my script on the other image and go from there. I’m glad I finally managed to figure this one out.

You can change this one to solved!

Cheers!

[Wayne Workman]

OP had AntiVirus installing inside SetupComplete.cmd before the FOG Client was re-enabled and started. The specific AntiVirus installation caused a reboot, which left the SetupComplete.cmd un-finished, and therefore all these other problems happened.

Consider building a snapin for the AntiVirus, which will auto-queue for any computer that is told to image and has the snapin associated with it, and the snapin will deploy after imaging is completed.