Making Fog as easy as possible in daily use

[lunde326]

@Tom-Elliott @Wayne-Workman Thanks for the help so far.
I’ve successfully made my “golden” image. and deployed it to the 4 available loan PC’s. everything around that works great.
but after the deployment the disk size is only around 30 GB ( image size +2 GB). and i have to go into disk management and grow the disk with the remaining 870 GB.
Any tips?

[Tom Elliott]

@lunde326 is the image type set to resizable?

[lunde326]

@Tom-Elliott Yeah, single disk resizable.

[Tom Elliott]

Are you running a current version of fog? Meaning trunk or the rc ?

[lunde326]

@Tom-Elliott

[Tom Elliott]

@lunde326 when and what version did you use to capture the image?

[lunde326]

@Tom-Elliott The server has been off internet access since it was configured running on an isolated network. so i was using the version in my image above.
did the capture earlier today. same with the deployments.

[Wayne Workman]

@lunde326 fog 1.3.0 RC1 is out, I’d really recommend you connect the server to the net in order to update, then go back to the isolated network.

[lunde326]

@Wayne-Workman Will do. thanks

[lunde326]

@Wayne-Workman Hmm, still does it in the latest version (leaves computer with a disk size 2GB larger than the image, and you have to grow the remaining X GB to make it full capacity again). image captured and deployed on the 1.3.0 RC1. The captured machine was that way after capture, and the machines that had been deployed to also.