• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Dell 3040

    Scheduled Pinned Locked Moved
    Hardware Compatibility
    5
    24
    12.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      JMacavali @george1421
      last edited by

      @george1421 Well, seems to be. Maybe it will hang during imaging but it’s going well so far. I’ll come back if things break again.

      Thank you for your help

      1 Reply Last reply Reply Quote 0
      • J
        JMacavali @george1421
        last edited by

        @george1421 Ok, so what happened here is that I was also having the same issue on a laptop (Latitude 3450). I was doing all the configuration changes using that instead of the desktop (i forgot I posted about the desktop first). That’s my fault, I’m sorry.

        Can you explain how to install the trunk kernels or what that means?

        george1421G 1 Reply Last reply Reply Quote 0
        • george1421G
          george1421 Moderator @JMacavali
          last edited by

          @JMacavali In my first post (very bottom of this thread) tells you where to download them from and where to place them.

          If you have 4.1 working then run with it. I was more concerned that you had 4.6.2 installed and not working and you downgraded to 4.1 and it worked. That is strange if that is the case.

          Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

          1 Reply Last reply Reply Quote 0
          • J
            JMacavali
            last edited by

            4.1 is working on the Latitude 3450 laptops.

            It is not working on the 3040 desktops. So 4.6 will work with the 3040?

            If so, then I’ll leave the kernel at 4.1 until I’m done with the eight 3450 laptops that I need to image, then change it to 4.6 for the 3040 desktops.

            Once again, thank you for your help.

            george1421G 1 Reply Last reply Reply Quote 0
            • george1421G
              george1421 Moderator @JMacavali
              last edited by

              @JMacavali said in Dell 3040:

              4.1 is working on the Latitude 3450 laptops.

              It is not working on the 3040 desktops. So 4.6 will work with the 3040?

              If so, then I’ll leave the kernel at 4.1 until I’m done with the eight 3450 laptops that I need to image, then change it to 4.6 for the 3040 desktops.

              Once again, thank you for your help.

              Well that is what is troubling 4.6 should work for the both. But you can have two kernels installed on the fog server, just name the 4.6 kernels to something like bzImage46 and then for the 3040 you can define a custom kernel (in the host record for each 3040) to load the bzImage46 (or just wait until you have the one model done and then move the bzImage over).

              For the developers, I think they would want to understand why 4.1 works and 4.6.2 fails. You shouldn’t have to mess with kernel version (IMO).

              Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

              1 Reply Last reply Reply Quote 1
              • J
                JMacavali
                last edited by

                So here’s where I’m at.

                1 3450 laptop imaged using the 4.1 kernel version. The rest say ‘no boot device’ - which is what I’m assuming is expected.

                Now when I change the kernel to 4.6.2 both - the 3450 laptops & the 3040 desktops say ‘unable to register host for the following reasons’ (and doesn’t list a reason) and then just sits a a black screen trying to register it.

                I’m going on vacation and will be gone for a week, but I’ll be back to this thread after that. Thanks for the help so far, hopefully there will be an easy fix for why it won’t register when I get back.

                george1421G 1 Reply Last reply Reply Quote 0
                • george1421G
                  george1421 Moderator @JMacavali
                  last edited by

                  @JMacavali We if you pxe boot and then select the PXE menu option for compatibility. It would be interesting to see what fails using the newest kernels. But enjoy your holiday and come back to the thread when you are well rested.

                  Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                  1 Reply Last reply Reply Quote 0
                  • J
                    JMacavali
                    last edited by

                    Hi again. I’m back and ready to try this all again.

                    Here’s where I’m at:

                    I’m working on 2 different computer types (which I know isn’t a good thing but they are having similar problems).

                    Dell Latitude 3450:
                    Using the newest kernal - 4.6.2 and it starts to go through fog, but when it gets to the part where it would actually image, it just gives me a black screen with a cursor blinking at the bottom. This also happens using 4.5.3. However, the computer does register with fog.

                    Dell Optiplex 3040:
                    Using the newest kernel - 4.6.2 and it won’t even register the host with fog. Says ‘host unable to register for the following reasons’ and then just goes to a black screen with nothing else (doesn’t list any reasons). Same thing happens on 4.5.3.

                    I’ve tried other kernel versions as well and none of them seemed to matter. At this point, I don’t know what to do. If anyone has a suggestion, I’m all ears. Thanks for your help so far with all of this!

                    1 Reply Last reply Reply Quote 0
                    • J
                      JMacavali
                      last edited by

                      I did the Compatibility test:

                      Dell 3450 - Network - Fail / Disk - Pass

                      Dell 3040 - Network - Fail / Disk - Pass

                      Both computers showed the 4.6.2 kernel that I downloaded when they started the compatibility test.

                      george1421G 1 Reply Last reply Reply Quote 0
                      • george1421G
                        george1421 Moderator @JMacavali
                        last edited by

                        @JMacavali This is just a wild guess. Can you place a dumb (unmanaged) switch between these devices and the building network switch, then try the compatibility test again?

                        We have see issues where spanning tree is enabled on the building switch, but none of the fast STP modes are enabled (port fast, RSTP, etc). The default spanning tree time to forward is 27 seconds. This means that the port will not forward traffic for 27 seconds after the link light comes on. During the FOG booting process the link light winks 3 times, and since the FOS engine (the OS that captures and deploys images) is so fast, it has already given up by the time the switch port starts forwarding data. I’m not saying this is the case but the quick test is to just put a dumb switch between the target and the building switch to see if you get different results.

                        Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                        1 Reply Last reply Reply Quote 0
                        • J
                          JMacavali
                          last edited by

                          The fog server and the devices are located on the same dumb switch. The dumb switch is connected to the network drop in my office (which comes from the core switches).

                          Thank you for offering the advice but that doesn’t seem to be the problem here.

                          Just to confirm I’ve unhooked everything and tried a different dumb switch. Still says network test failed.

                          george1421G 1 Reply Last reply Reply Quote 0
                          • george1421G
                            george1421 Moderator @JMacavali
                            last edited by george1421

                            @JMacavali Ok that was the easy test.

                            The next step is to schedule a debug deploy (don’t worry we are not going to deploy anything). You will need to manually register the device, then setup a deploy job. Don’t forget to check the debug option on the deploy task. Then pxe boot the target. It should load the FOS engine and require you to press enter at the wall of text a few times. But in the end it should drop you to a command prompt.

                            At the command prompt key in and post here

                            1. ip addr show Make sure the link light is on the target computer
                            2. lspci -m this will spew a bunch of text but it contains the necessary info to identify the hardware in that computer.

                            Lastly if you have one of these target computers booting into windows, it would be interesting to know the vendor and hardware ids for this NIC. These NICs should be supported by the FOS engine (linux kernel). We just need to verify which bits are falling down.

                            Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                            1 Reply Last reply Reply Quote 0
                            • J
                              JMacavali
                              last edited by

                              I’ll work on all this and post back tomorrow with results. Thanks again for all this help.

                              J 1 Reply Last reply Reply Quote 0
                              • J
                                jburleson @JMacavali
                                last edited by jburleson

                                @JMacavali I can confirm that the Dell Optiplex 3040 works with the latest kernel 4.6.2. Here is my server info:

                                OS: Ubuntu 16.04
                                Fog:
                                Running Version 8515
                                SVN Revision: 5882

                                I was able to inventory, register, and deploy an image using uefi boot (secure boot disabled). However, after the it finished deploying the image and rebooted it got stuck in a boot loop. Switching EFI Exit types did not have an impact either. Changing back to legacy boot did fix the issue.

                                I did also try updating the 3040 bios to the latest version available on the Dell site but it did not change the uefi booting issue.

                                My recommendation is to disable secure boot and switch to legacy boot. If you do that then it should work fine. I have imaged 3 OP3040s with these settings.

                                1 Reply Last reply Reply Quote 1
                                • J
                                  JMacavali
                                  last edited by

                                  alt text

                                  1 Reply Last reply Reply Quote 0
                                  • K
                                    kusan
                                    last edited by

                                    Try to image your device with below given steps:
                                    Log on to Windows as an administrator
                                    Open Dell Backup and Recovery by clicking Start, pointing to All programs and clicking Dell Backup and Recovery
                                    Click Restore System
                                    In the Restore System window, select the backup file you want to use to restore your system in the drop-down menu and click Next
                                    In the Confirm window, read the caution message and click both check boxes to confirm that you want to overwrite your computer’s operating system with the selected backup file, and that the restore process cannot be interrupted or undone
                                    Click Start. Your computer will restart into the Windows Recovery Environment. Dell Backup and Recovery will first erase your operating system partition and then install the selected backup
                                    When the process completes a success message appears. Click Finish.
                                    You can also take help from Dell Latitude 3450 Manual.

                                    1 Reply Last reply Reply Quote 0
                                    • 1
                                    • 2
                                    • 1 / 2
                                    • First post
                                      Last post

                                    151

                                    Online

                                    12.0k

                                    Users

                                    17.3k

                                    Topics

                                    155.2k

                                    Posts
                                    Copyright © 2012-2024 FOG Project