Multicast Session on wrong eth-port

[Tom Elliott]

@abos_systemax When the command starts, I know it’s showing on the wrong interface, but is it also showing the wrong IP address?

[Tom Elliott]

Can we get some info when you have time?

[abos_systemax]

Hi Tom, sorry for me not replying. I was busy with different work in the meantime.
I am unable to recall the IPadress of the NIC, because the chosen NIC was connected to a VLAN that does not have a DHCP-server nor a static IP assigned. Also; as soon as we took the other NIC down, the problem resolved itself. I am willing to check what happens if I re-enable the second NIC, but am not able to do so in the upcoming week.

[Sebastian Roth]

Should we mark this solved for now as taking the second NIC down fixed the issue?

[abos_systemax]

As far as I am concerned: Yes, but the issue itself might not yet be fixed

[Tom Elliott]

Any way we can get some more information with this?

[dvchuyen]

I just updated to lasted Trunk version today and have the same problem

Multicast setting

Storage node (I have only 1 node)

And this is multicast log (wrong interface and IP address)

[dvchuyen]

@Tom-Elliott Please check my last post on this thread

[Tom Elliott]

@dvchuyen Please update and see if all is a little better. I found I missed a grep statement in looking for the interface and hopefully have a correction for this.

Thanks for the info thus far.

[dvchuyen]

@Tom-Elliott Yes, it is working now.
Thanks,