Chainloading failure: Toshiba Tecra C40-C UEFI & Samsung SSD MZNLF128HCHP-000

[Tom Elliott]

@mabarton no. The chain load issue is as George was discussing. Uefi exit is not pretty, but on imaging you should ensure secure boot is off for download, though I would recommend for both upload and download.

[mabarton]

@Tom-Elliott
That was where I was lost. We use chown often with students.

[Tom Elliott]

@mabarton for the chain load, if you set host efi exit to type exit and reupload with secure boot off, then deploy to system with secure boot off, I suspect you might have much more luck.

[mabarton]

@Tom-Elliott
I always take secure boot off

My host is set to…EFI: exit and BIOS: exit

Then in fog settings… it is EFI :exit and Fog Boot: exit

[mabarton]

@Tom-Elliott
I double checked and with those settings, I still get a chainloading error.

[Wayne Workman]

@mabarton said in Chainloading failure: Toshiba Tecra C40-C UEFI & Samsung SSD MZNLF128HCHP-000:

@Tom-Elliott
I double checked and with those settings, I still get a chainloading error.

The real question is - if you skip network booting, does the OS load?

[mabarton]

@Wayne-Workman
I am taking a course on Linux in the fall so I hope to have a better understanding…

When changing a setting in the WebUI, do I need to make changes on the machine as well?

[Wayne Workman]

@mabarton typically, no.

[george1421]

@Wayne-Workman Yes, if firmware set to boot from hard drive it works every time. (the OP is still on the 2 minute cool down between posts for being a noob).

[mabarton]

@Wayne-Workman
Yes, without fail.I have to wait 120 sec to post. Sorry for the delayed answers.

[Wayne Workman]

@mabarton well - I think secure boot is off because you got to the end of uploading.

The chain load failure is a different problem - as others have already said.

Can you post a picture of the chain load failure? Please include the whole screen and be sure the photo is focused - we can tell you a lot from that and give you a link too - to see what boot script that IPXE is using.

[mabarton]

@Wayne-Workman

[Wayne Workman]

@mabarton I hate to be the bearer of bad news but all of your pictures are upside down and it makes it very difficult for me to read them.

[mabarton]

@Wayne-Workman I’m aware. Even when I flip them, they come in upside down. Its fun:(

[Wayne Workman]

@mabarton in the web interface, go to fog configuration - ipxe boot menu. Check “no menu” and see what happens. If it fails then undo it. But post a pic of the failure. It MIGHT have more info.

[mabarton]

@Wayne-Workman
Fixed the upside down issue

Working on the config change.

[mabarton]

@Wayne-Workman

With menu off

[mabarton]

This post is deleted!

[mabarton]

Here is something interesting.

I am able to image the computer with Clonezilla.

Right now I am attempting to deploy the image to a different computer.

[Wayne Workman]

Have you ever changed your fog servers ip address?

If you go to a web browser and visit:
X.x.x.x/fog/service/ipxe/boot.php?mac=mac:with:colons

What do you get? Copy/paste. Replace Xs with fog ip and the mac with colons with the problem computers mac.