Download stops with blinking underline after reboot.

[bmyers]

@Wayne-Workman Tried to boot directly from the hard drive and same thing. Let me boot with a live linux version and look at what the disk configuration looks like. In the meantime, I thought I saw where someone else was having issues with Dell equipment? Most of the FOG imaging seems to be Windows oriented so maybe not too many folks going down my road?

[Wayne Workman]

@bmyers It’s geared towards windows, but FOG images Linux great. Your issue is likely hardware related.

What filesystem type is these OSs setup with? Did you use a resizable image or not?

Also - you’d likely have much better luck with FOG Trunk if you’re not already using it.

[bmyers]

@bmyers Live booted Linuxmint and looked at disk partitions with fdisk and parted. The output looked consistent with a good system. I examined the mbr with dd for 512 bytes and it looked reasonable compared to another system. Any other suggestions?

[bmyers]

@Wayne-Workman Sorry didn’t see your post… The file system is ext4. I did use resizable image since we have had some systems replaced with a different size hard drive in the past. Let me look into FOG Trunk and see what that is about.

[Sebastian Roth]

@bmyers Definitely give FOG trunk a try (see in the wiki on how to install). If you still see the issue could you please create a new image definition - non-resizable and try deploying this. In case this does not help we need more information. Please check the image directory on the server ls -al /images/<imagename> and post the contents of all the small text files you have in there. As well upload d1.mbr.

[bmyers]

@Sebastian-Roth I was in the middle of upgrading to trunk and of course… I have been told to back burner this for another project (problem). I’ll get back to this next week. Thanks for everyone’s help so far.

[bmyers]

@Sebastian-Roth I’m Back! Upgrade to FOG trunk 8020. Created new image with non-resizeable option. Deployed and get the same thing. (blinking underline cursor). Changed host Bios Exit Type to Grub, pxe boot, imaged, reboot, pxe boot again, boot from hard drive…then hung up as before but on the screen says: Begin PXE Scan Starting Cmain() (blinking underline cursor). It seems like it’s not even getting to the MBR??

[root@linuxbuild1 CentOS6htpvncNRHD]# pwd
/home/images/CentOS6htpvncNRHD
[root@linuxbuild1 CentOS6htpvncNRHD]# ls -al
total 2173608
drwxrwxrwx 2 root root       4096 Jun 15 15:52 .
drwxrwxrwx 8 root root       4096 Jun 15 15:52 ..
-rwxrwxrwx 1 root root          0 Jun 15 15:49 d1.has_grub
-rwxrwxrwx 1 root root    1048576 Jun 15 15:49 d1.mbr
-rwxrwxrwx 1 root root         47 Jun 15 15:51 d1.original.swapuuids
-rwxrwxrwx 1 root root   52941424 Jun 15 15:49 d1p1.img
-rwxrwxrwx 1 root root 2106038315 Jun 15 15:51 d1p2.img
-rwxrwxrwx 1 root root        512 Jun 15 15:51 d1p4.ebr
-rwxrwxrwx 1 root root        512 Jun 15 15:49 d1p5.ebr
-rwxrwxrwx 1 root root   65710547 Jun 15 15:52 d1p5.img
-rwxrwxrwx 1 root root        368 Jun 15 15:49 d1.partitions

d1.has_grub (empty)

cat d1.original.swapuuids
/dev/sda3 7a7a7ae8-9b81-49bd-8c3a-ca447dbb6c60

cat d1.partitions
label: dos
label-id: 0x000c1095
device: /dev/sda
unit: sectors

/dev/sda1 : start=        2048, size=     2048000, type=83, bootable
/dev/sda2 : start=     2050048, size=   102400000, type=83
/dev/sda3 : start=   104450048, size=   102400000, type=82
/dev/sda4 : start=   206850048, size=   281430016, type=5
/dev/sda5 : start=   206852096, size=   281427968, type=83

[bmyers]

@bmyers I just tried to load the same image I took from the same machine (CentOS 5) and it went through the whole imaging process then on reboot…dhcp…boot from disk…
Chainloading failed, Hit ‘s’ for the iPXE shell; reboot in 10 seconds.

[Tom Elliott]

@bmyers change your exit type to, I’m just guessing, grub.

[bmyers]

@Tom-Elliott Thank you Tom. That fixed the CentOS 5 version but the CentOS 6 imaging is still a problem. I did try the Grub with that one also as stated above.

[Sebastian Roth]

@bmyers said:

I did try the Grub with that one also as stated above.

Is that one an UEFI machine? Have you tried all the other exit types? Ah right… You also changed boot option in the BIOS to boot straight from disk and still didn’t work, right?

I did use resizable image since we have had some systems replaced with a different size hard drive in the past. Let me look into FOG Trunk and see what that is about.

The file listing and stuff you posted shows a non-resizable image. Maybe you changed the image type somewhere along the way? Please create a complete new image (whichever type you like), fresh upload, then download and see if you still have the issue. Other than that you better make sure you have the IDE/AHCI settings all matching on your systems!