Failed to get an IP via DHCP!
-
@jes6309 Can you please verify if it is static speed or port-fast that make it work in your case? We have seen more auto-negotiation issues with newer kernels lately. I am a bit concerned about this! Are we able to fix this from our side (kernel parameter or whatever)??
-
@Sebastian-Roth After reverting the port back to auto and leaving port-fast enabled, registration and imaging was still successful.
Looks like port-fast was the fix.
-
@Wayne-Workman I am getting the same issue as well. I have ensured that the TFTP username and password are correct, but I get the same error. Cannot update kernel and my kernel version does not show, same as @jes6309
-
-
Hi,
Just wanted to chime in and say I had the same issue, and the fix was the same- had to enable the ‘port-fast’ feature on our cisco switches.
From my reading of the cisco documentation it looks like its safe to enable this feature on all ports that are patches to ‘endpoint devices’ like PCs, printers etc.
Thanks to the posters in this thread for providing the required info. Nothing worse than finding a thread on the internet describing the exact issue you are having, and the last post is the original poster saying “I solved it” without elaborating what the fix was!
-
@mr626 This has been in the wiki documentation for many years! So I am wondering if it’s all just to hard to find. We should definitely work on getting the wiki updated I reckon!
-
@Sebastian-Roth I have to admit I didn’t come across the wiki entry in my search. Will make sure to check there next time.
-
@Sebastian-Roth said in Failed to get an IP via DHCP!:
@jes6309 As you can see here this NIC model is supported since kernel version 2.6.x and upwards. So it should not be a driver issue! As well, “Sending discovery…” actually means that we found a network interface and try to get an IP for it via DHCP. So it could be:
- Layer 1 issue like cable (you already checked that)
- Spanning tree issue (make sure you have RSTP or configured “port fast”)
- Auto-negotiation issue (try configuring static speed instead of auto-negotiation for that port)
- Ethernet energy saving (see if your switch has EEE/802.3az feature and disable if possible)
Made a new article for DHCP troubleshooting. This will definitely be a fun article to work on over time!
https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_DHCP -
@Wayne-Workman said in Failed to get an IP via DHCP!:
Made a new article for DHCP troubleshooting. This will definitely be a fun article to work on over time!
https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_DHCPWhile I think this is a good idea I am wondering if it will have mostly the same content than the wiki article in my signature which is meant to describe the whole boot process. Possibly we can have all the DHCP related infos in that new article and link it all together in the big one as well.
Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)
Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG
-
@Sebastian-Roth You’re right. When I made it I was thinking… man we are gonna have stuff spread out everywhere. But, when I look at the other articles that are solely about DHCP there is no troubleshooting, just stuff about setup. I’ll move this stuff into what you’re working on and link this article to that.
