ipxe login loop after upgrading to latest trunk
-
@Wayne-Workman
Just updated to 8060 and have the same login loop except I never have and still don’t have “hide menu” enabled. I have toggled it on and off and the loop remains. Any help here is greatly appreciated. -
@Cavender i guess the scope of the bug is bigger than what was initially reported.
Anything special about your boot menu? Is this all hosts? What boot ROM are you using for dhcp option 067?
-
@Wayne-Workman said in ipxe login loop after upgrading to latest trunk:
Anything special about your boot menu
The main boot menu is unmodified. Yes on all hosts. The fog server is on an isolated network and it serves hdcp.
-
@Cavender please update. I don’t know if it will fix the issue for you, but I did fix the “hide menu” issue. I found another issue as well that should be well corrected for now.
-
@Tom-Elliott 8062 fixes the loop, thank you! The menu still prompts for login with “hide menu” disabled. Just to verify, the “hide menu” is the “menu_hidden” toggle in “boot settings” right? Another thing I noticed is that with 8060 and 8062 “install/update your database schema” did not happen when opening the web interface for the first time after each update.
-
@Cavender schema updates don’t have to occur every update, so this is ok.
Can you show me the browser output of http://ipoffog/fog/service/ipxe/boot.php
-
@Tom-Elliott
#!ipxe
set fog-ip ipoffog
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
iseq ${platform} efi && set key 0x1b || set key 0x1b
iseq ${platform} efi && set keyName ESC || set keyName Escape
prompt --key ${key} --timeout 30000 Booting… (Press ${keyName} to access the menu) && goto menuAccess || sanboot --no-describe --drive 0x80
:menuAccess
login
params
param mac0 ${net0/mac}
param arch ${arch}
param platform ${platform}
param username ${username}
param password ${password}
param menuaccess 1
param debug 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain -ar http://ipoffog/fog/service/ipxe/boot.php##params -
@Cavender this appears, to me, to indicate hidden menu is enabled.
-
@Tom-Elliott To verify, the “hide menu” is the “menu_hidden” toggle in “boot settings” in the web management?
-
@Cavender yes.
-
I find it also under:
FOG Configuration Page->iPXE Boot Menu->Hide Menu
-
@Tom-Elliott Strange, then.
-
@Tom-Elliott I must leave the office until tomorrow morning. I really appreciate your help Tom and I’ll be digging back into this first thing in the morning. Thank You!
-
I imagine this is now fixed, but please let us know and feel free to mark this as unsolved in the case it is not fixed for you after you update.
-
@Tom-Elliott said in ipxe login loop after upgrading to latest trunk:
agine this is now fixed, but please let us know and feel free to mark this as unsolved in the case it is not fixed for you after you update.
The main menu still prompts for login. This install has been updated many times since an early 1.2 so I decided to start fresh. The main menu still prompts for login and the quick registration and imaging says “no such file or directory”. The advanced menu side works great. Is this problem in my database at that point? What info / logs can I get to you to diagnose?
-
@Cavender I need to see the db to try to understand why it thinks there’s a hidden menu.
That said, the “login loop” issue (itself) should be fixed. I’m solving this thread. Would you mind opening a new one in regards to the fact that it thinks it’s in hidden menu when it’s not?
