image size on server is 0
-
@Tom-Elliott its centOS 6.7
-
@saif Can we confirm that the image size isn’t actually really 0?
ls -lahRt /images -
@Wayne-Workman said in image size on server is 0:
ls -lahRt /images
yep
/images/Nick:
total 23G
drwxrwxrwx 8 fog 502 4.0K May 10 11:23 …
-rwxrwxrwx 1 root root 23G May 10 11:23 sys.img.000
drwxrwxrwx 2 root root 4.0K May 10 10:32 .
-rwxrwxrwx 1 root root 8.2M May 10 10:32 rec.img.000
-rwxrwxrwx 1 root root 15 May 10 10:29 d1.original.fstypes
-rwxrwxrwx 1 root root 0 May 10 10:29 d1.original.swapuuids
-rwxrwxrwx 1 root root 260 May 10 10:29 d1.original.partitions
-rwxrwxrwx 1 root root 2 May 10 10:29 d1.fixed_size_partitionsSaif Almodares
-
i am sure all permissions are correct
please any advice -
@saif I sent you a message. (talk bubble, top right).
-
@saif Can you try to set permissions to
fog:root?Normally, when permissions show as
root:rootthis means that the image was manually moved around (for whatever reasons).Just an idea. I know that 777 permissions should allow access - but we’ve seen some weird stuff surrounding this before on some setups.
Recursively:
chown -R fog:root /images -
@Wayne-Workman thanks
i did all that still the same
-
@saif Anything in the apache error logs? See the signature below my message on where to find the log files…
-
@saif Looks like you have remembered your login credentials for your FOG WebGui in your browser.
Your browser will have filled in the Storage Node credentials with the Webgui login data, overriding the FTP data, so you should correct that for starters. It might have done the same for your FTP settings at the configuration page.
I recommend disabling password remembering for FOG Webgui
-
@Sebastian-Roth [Fri May 13 10:52:52 2016] [error] [client 192.168.0.59] File does not exist: /var/www/html/favicon.ico
got this
-
@saif Web server address. it’s in fog settings, bottom one I think. Make sure it’s right.
-
Have you set this server up and then moved it or changed the IP?
-
-
@Wayne-Workman i am using the same server for both fog and web server and its configured correct i just checked that
-
I took a look but couldn’t figure it out. There was some very bad lag that really slowed things down.
-
@Wayne-Workman thanks man you helped a lot appreciate your time and patient
i will do like you said, move to the centOS7 and see
thanks again -
@Quazz i did but still the same
-
i have deploy a new image and i can read the size on server but the problem happened with only one image
i think its a bug -
@saif Have you tried re-uploading the image? That’s the simplist thing.
-
@Wayne-Workman yep
its working fine
