Invalid GPT table

[Tom Elliott]

@DarkEnergy just my guess, but did you try running fixparts on the upload before it uploaded? Seeing as the systems were originally set up for uefi and you turned it off, it sounds more like it simply had “bad gpt info” as UEFI requires a gpt layout. When you made the switch, from what I can gather, you set the host to use mbr style layout by just changing the info in Windows. The LLF in this case, I think, would be more using fixparts to correct the particular issue.

[DarkEnergy]

As requested, here are some screenshuts after running the commands in debug mode:

Please let me know if you need more information.

[DarkEnergy]

Here is another error after uploading an image for a Lenovo Touch B50-30.

[Tom Elliott]

@DarkEnergy https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_FTP

[Sebastian Roth]

What about gdisk -l /dev/sda??

[DarkEnergy]

@Tom Elliott
I ran the test and it was successful. I was able to copy a file from my system (Windows 10) to the FTP in the fog server, then I was able to delete it as well.
I am not sure what was the test for other than to make sure if the access to write and delete are in place and the service is working?
For this so far so good.

[DarkEnergy]

@Sebastian-Roth
Is there a specific option do you want me to run after running gdisk -l /dev/sda/?
I am getting a menu that is all.

[Tom Elliott]

@DarkEnergy what are the permissions for /images?

Can you, from debug, run fixparts /dev/sda then run fog

[DarkEnergy]

@Tom Elliott
The directory has the following permissions:
drwxrwxrwx 2 root root 16384 Dec 11 17:16

Will this be for the Lenovo or for the HP or for both?

[Wayne Workman]

@DarkEnergy said in Invalid GPT table:

@Tom Elliott
I ran the test and it was successful. I was able to copy a file from my system (Windows 10) to the FTP in the fog server, then I was able to delete it as well.
I am not sure what was the test for other than to make sure if the access to write and delete are in place and the service is working?
For this so far so good.

But did you use the credentials you found inside of Storage Management - > Default when you tried? Because in the screen shot below, it clearly says “login incorrect”. that’s a pretty clear error.

Also - I just added notes to the FTP Troubleshoot article about what credentials to use when doing the tests.

[Sebastian Roth]

@DarkEnergy said in Invalid GPT table:

Is there a specific option do you want me to run after running gdisk -l /dev/sda/?

What I was aming for is the output you see before the menu. I should say something like “Found MBR”

[DarkEnergy]

@Tom Elliott

Thank you, Tom the fixparts command fix the GPT issue.
I will try to do a system with full GPT table and see if it upload.

[DarkEnergy]

@Sebastian-Roth
I try to FTP tot he server using the FOG account and it failed.
I am thinking that the password for the storage changed after the last update; it is giving me grief since them.
How can I solve this particular issue? Where do I need to make the changes?
The two last images that were uploaded are unable to be download as the system does not recognized the new images due to the task never was finalized.

[Wayne Workman]

@DarkEnergy said in Invalid GPT table:

How can I solve this particular issue? Where do I need to make the changes?

@Tom-Elliott said in Invalid GPT table:

@DarkEnergy https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_FTP

[DarkEnergy]

Thank you so much for all your assistance!!!
FOG is fully functional again.

You guys are the best!!!