Surface Pro 4 won't get to registration menu

[sarge_212]

@george1421 no, no FOG broken here However, it is using the most current inits and kernels I believe as I am no longer getting the cdc-ether error @Sebastian-Roth . That’s a step in the right direction. And @george1421 I do believe they DO have a weird hard drive structure. I think Windows preloads 3 separate partitions on these surfaces:

A recovery partition, system partition, and the actual partition where the OS is.

That being said, I think I’m going to play with blowing away these partition schemes, USB image it, and then try and register the image with the FOG server. That might just do it. You guys have been so helpful!

[Sebastian Roth]

@sarge_212 I really don’t think that partition scheme comes into play at this early stage of loading the kernel! Feel free to do whatever you think is right but I doubt that a simple partition layout will help in loading the kernel any further.

That said you might want to try cranking up the kernel debugging level and maybe we see some more information then.

[sarge_212]

Well shucks.

[Sebastian Roth]

Are you happy to play with the code, as FOG 1.2.0 does not have this included in the WEB GUI yet (just another reason for FOG trunk). Take a look at /var/www/fog/lib/fog/BootMenu.class.php

Search for loglevel=4 and change all (three) to loglevel=7. Plus add debug as well. For example around line 442 would be:

				"osid=$osid",
				"loglevel=7",
				"debug",
				"consoleblank=0",

And line 247:

        print "$this->kernel loglevel=7 debug ".implode ...

[george1421]

@sarge_212 Don’t get discouraged here. You are doing pioneering work that hasn’t been done before with fog and the surface 4. “Some times you will get a little bloody walking on the bleeding edge of technology”

As Sebastian said, go into the fog settings and crank the debug level up to max and see if it will provide any additional information.

It would still be interesting to see if you can get a live linux to boot on this thing. That may be a path if the debugging doesn’t provide any more data. You can live boot linux from a usb flash drive so there won’t be anything installed on the surface. The live linux would give us a chance to run a few commands as well as tell use that booting linux on the tab is possible.

[sarge_212]

@george1421 You guys rock, and thanks for the encouragement. Don’t worry, I’m far from giving up! Sebastian, thanks for the tips on getting a higher level of debugging going, I will do that. Thanks FOG team!

[sarge_212]

I changed the debugging up to level 7 and there isn’t any more output on the surface after I try to register it. Any suggestions on a minimal ISO that I could drop on a USB stick and live boot it to run a few commands? Thanks all!

[george1421]

Similar issue in another thread. https://forums.fogproject.org/topic/6525/pxe-boot-hp-x2-210-hybrid-tablet-windows-10-pro/10

Not sure if they are related or not, but OP in that thread was able to live boot ubuntu.

[Sebastian Roth]

Too bad that we don’t get any more news with higher log level. Tried some google foo (wonder why I didn’t do this earlier) and came up with this:
http://superuser.com/questions/1005825/linux-on-new-surface-pro-4
https://www.reddit.com/r/SurfaceLinux/comments/3zytfw/status_of_arch_linux_on_sp4/
https://www.reddit.com/r/SurfaceLinux/comments/3xhmu7/just_installed_chakra_linux_on_surface_pro_4_i7/
https://www.reddit.com/r/SurfaceLinux/comments/3w8du2/outofthebox_support_for_linux_mint_173_cinnamon/ (see the EDITs on Pro 4)

There seam to be a lot of things that don’t work but I guess most of that is irelevant for cloning. By the way, have you disabled secure boot?

[sarge_212]

Disabling secure boot was one of the first steps as indicated on another forum post about imaging a surface pro 3 so I had done that already. I’ll look into live booting a linux OS on the surface.

[sarge_212]

Also,

What commands should I run when I get that live linux install booted up on the surface?

[sarge_212]

Awesome! I was able to make a USB ubuntu live image and I’ve booted into that and am more than happy to provide some command output. I’m not sure what you guys are looking for. Just let me know, thanks team!

[george1421]

It would be interesting to capture the output of
lspci -m
and
lsblk

Just direct the output into a file and the move the file to some place where you can post the output here. I’m also working on an idea for a debugging tool to. But I’m not quite done yet. But its great you have a live boot system on the surface pro 4, that means there is some hope of success. (!!)

[Wayne Workman]

@george1421 said:

But its great you have a live boot system on the surface pro 4, that means there is some hope of success. (!!)

I want to understand how Ubuntu and other distributions can reliably access persistent storage for whatever device it’s installed onto. Maybe we should look into that? Is there some sort of intelligent code that determines options correctly, or are they just hard-coding for each unique piece of hardware? Or is the Live kernel just compiled with every single option enabled by default?

[george1421]

@Wayne-Workman The answer is easy why the live boot environment can run on a wide variety of hardware. Its much more difficult for an embedded environment because of the limited resources.

@sarge_212 Please excuse this post it will be off point of your issue.

The majority of the issue is trying to keep the kernel size below a specific size. I know when I was building kernels for an embedded device back in the 2.2 to 2.4.37 kernel days we had 512KB of nv storage with 1MB of RAM. The kernel and root file system all gzipped up had to fit on that 512K boot device. When booted syslinux would take that kernel build a ram drive and expand both the kernel and root fs into that 1MB of ram, and leave enough ram left over to run the device. (something similar today is the same process how dd-wrt is booted off consumer (home) internet routers). Well when you make these kernels you generally know the target hardware so you throw out drivers for hardware you know will never exist in your environment. (i.e. why include a driver for an IBM token ring board if you will never use it)

When you build a linux kernel you can decide to either statically link the drivers right into the kernel or build them as dynamically linked modules. How they are linked doesn’t matter (much) since the size of the driver itself is the same. In this case the driver will either be in the kernel itself (i.e. bzImage) or if dynamically linked in the root file system (init.xz).

The idea when pxe booting devices is you want to get the kernel and the root fs to the client in a moderately fast time. So you want the kernel and the inits as small as possible yet still remain functional. Plus the tftp process is not designed (really) to handle large file transfers. Transferring a 500MB file is kind of slow over tftp. That’s why the fog devs use http (one reason why they are using ipxe instead of the standard pxe boot code) to deliver the fog kernels and init to the target computers instead of tftp (there are a few other reasons, but speed is very important).

Just for comparison. On my ubuntu laptop the kernel is 5.8MB and the drivers (/lib/modules/<kernel version>) are almost 140MB. Compare that with FOG’s client OS where the kernel is 6M and the inits are about 16MB (understand 16MB is the kernel drivers plus any programs included in the FOG OS).

So for PXE booting you want the smallest kernel and root fs so it can be delivered quickly over the network. One way to get a small kernel is to only include drivers you expect to see in the target’s environment. So in the end its a balancing act between size, flexibility, and speed.

So ultimately the answer to the question is: Why can live boot OSs work where the FOG OS fails? Its because the live boot OSs have the luxury of a huge nv storage to house every driver the kernel supports, plus they really don’t care how fast the target computer boots. I really haven’t timed it, but the FOG OS appears boots in less than 15 seconds (once you get past all of the ipxe stuff).

Back on point of this thread: If we can identify what kernel drivers this new hardware uses, the devs can consider to include that “required” drive in the kernel or the inits. That is why it is important that if a live boot OS to capture what it sees and properly relay that to the devs for consideration. If a live boot OS fails to boot, the owner of that device is out of luck since the linux kernel itself does not support the hardware.

[Wayne Workman]

@george1421 But the kernels and inits are not loaded every time a computer network boots, they only load when there is a task. And just for the record, I’m fine with longer loading times if it means better support for larger range of systems. Specifically storage and network interface drivers.

Thanks for the explanation though. Very well written, and I understand the kernel and drivers a lot better now.

[sarge_212]

Okay FOG team,

Here is the output of those 2 commands on a Surface PRO 4, see attached…0_1453757795337_deviceinfo.txt

Thanks, I do have a live Ubuntu running now, let me know if there is anything else I can provide

[george1421]

@sarge_212 (this is a repost from another thread, but I want to see if it works with this hardware too)

If you are willing and have a general knowledge of linux, I would like you to try something.

I’ve been working on an idea about booting the FOG Client kernel (the bits of FOG code that run on the target computer to load or capture images) using a usb drive. Understand this is only for debugging purposes. Right now it is not clear in my mind if the booting issues with these newer efi based systems are with the PXE boot kernel, the FOG Client kernel, or the hand off between ipxe and the FOG kernel.

To test this I wrote a document to create a uefi boot media that will boot the fog kernel from USB. You can not capture or deploy using this kernel only access command line tools. But the point of this exercise is to see if it boots, period.

If you have a spare 2GB or larger usb flash drive, are comfortable with some linux commands and have a little time; could you follow the instructions outlined here: https://forums.fogproject.org/topic/6532/usb-boot-target-device-into-fog-debug-os/3

For the sake of the test, I only want you to execute what appears id method #3. Understand these instructions were written for ubuntu, but they should translate to Centos 7 without too much headache ( ) . At the bottom there is a copy and paste section where you can copy the commands paste them into a text editor, change the reference to the usb flash drive and then just execute the commands one after another through a remote terminal. It takes me less and 5 minutes to execute the commands once you have the rpm files installed.

For the flash drive start with a freshly formatted flash drive using a windows computer and format it fat32 (note the first step of my instructions tells linux to reformat the drive, any existing content will be lost). If you have any questions about this, please post back here.

What I want to test:

1. Does it boot?
2. IF it doesn’t boot is there an error message?
3. Does this image boot on any other device you have that is in uefi mode?

After this test we will add in the grub insmod commands and test again. But first lets see if you can build the boot drive and get it to boot on this table as is.

[Sebastian Roth]

@sarge_212 Would you be able to upload the full output of dmesg as a text file here if you get up your ubuntu live stick again. Or if you can get George’s FOG debug system (I really like this approach and hope that we can use this even more and maybe simplify it in the near future) that would be a great progress.

Looked throught the outputs you posted and I can’t see anything in particular that I would think is causing the issue.

[sarge_212]

@Sebastian-Roth I am in the process of making a live debug fog usb stick now. I’ll let you guys know of the status when I get there. Thanks for all the help so far!