Cannot Image HP Stream 11 Netbook
-
I use ipxe.efi on these streams. Also when you first turn these puppies on you need to be hitting F12 or make sure you have network boot first. If it just skips everything I believe it’s the adapter. I have a couple of adapters I have tried and some just wont pxe boot. I have a usb 3 to gig ethernet adapter i’m trying out but it wont load the inits. I can boot to fog just fine though.
I guess just try some adapters if you have the availability.
Also, you said windows 10. are these the HP Stream 11 pro G2? -
@Tom-Elliott Yep the NIC is PXE bootable, it’s a StarTech USB21000S2 and this article here is why I bought it http://www.johnwillis.com/2014/03/pxe-booting-using-usb-to-ethernet-dongle.html.
@Wayne-Workman Will do.
@drc0nc I have network listed first in the bios and I’ve tried pressing F12 and no luck PXE booting. If I cannot get this adapter working then I will look into other adapters. Which ones did you get working? The Netbooks are HP Stream 11 11-R050SA.
-
Turn legacy booting off. Then set the bootfile to any .efi file and try again.
-
@mwbutler I use these for the time being Here
but anything with the ASIX AX88772B chip ive seen work now.
If you want to read through my long going post have at it.
also, I have updated one of my streams to windows 10 and i can pxe into the menu but cant pull an image yet. haven’t done much testing yet on it though. I’m mainly using win 8.1 for now. -
@mwbutler Do you see any PXE related messages on the screen while booting up? Tried hitting F12 on bootup? Do you see the USB NIC as a startup option to choose from? Might work in legacy or UEFI only or both. Depends on the system you have - not sure about the Stream 11 as I don’t have one to test.
Pretty good comment on USB NIC PXE booting: http://www.msfn.org/board/topic/162015-usb-to-ethernet-adapters-and-pxe/?p=1072858
-
@d4rk3 I tried that and that and it wouldn’t pxe boot.
@drc0nc Thanks for the info. I’ve ordered a few adapters which have the ASIX AX88772B chipset so hopefully they will work.
@Sebastian-Roth There are no PXE boot messages when the netbook is booting up. I pressed F12 (network boot) and after a few seconds the laptop boots to W10.
The adapter I have doesn’t seem to work so I’m goign to give up on it for now and will try the new adapters next week.
Thanks all.
-
@mwbutler I’m currently working with this same machine… I did get it to pxe boot after changing option 67 to ipxe.efi. I think I left the legacy support disabled and it took off. Unfortunately my normal images won’t work due to there not being MBR apparently and it doesn’t find the hard drive, so I’m still in testing, but I will let you know.
-
@Hanz I was having the same problems, if you see my thread https://forums.fogproject.org/topic/6036/hp-stream-11-pro
I had to change the host disk to /dev/mmcblk0 and that pointed fog to see the HDDs. -
@drc0nc ok I see the part about changing the host disk, but which format are you using ? (Multi part, single part-resize…etc)
-
@Hanz multiple part image, single disk (2)
-
The ASIX AX88772B chipset adapter turned up today and after a bit of fiddling I managed to capture an image of a netbook ! Here are the host settings <Click me>, using bootfile called ipxe.efi and BIOS settings are Secure Boot <Disabled>, Legacy Support <Enabled>, Network Boot Protocol <IPv4 (Legacy)>. FOG version is trunk 5927.
Only issue now is how to deal with 100+ netbooks with the same mac address. Anyone know how I can get around this?
Thanks again for all your help, much appreciated!
-
Just tried to deploy the image to the same netbook and got this <Error>. Anyone know what is causing it? See my post below for more info.
-
https://forums.fogproject.org/topic/494/download-image-stops-at-preparing-disk-stage-2/3
Possible drive issue?
-
@mwbutler said:
Only issue now is how to deal with 100+ netbooks with the same mac address. Anyone know how I can get around this?
I was talking to @Tom-Elliott about this issue a week or so ago - we have ideas about how to better handle it.
But for now, manually create your hosts with their WiFi MAC address and give them a name as you desire. Inside of FOG Configuration -> FOG Settings -> something… -> early hostname change Turn that off. You’ll need to rely on the client to change names, and don’t worry, it does it fine.
After creating the hosts manually, there’s a little “+” button by the MAC address. Use that to enter in the Mac Address of your USB NICs. Then there’s some checkboxes in that area also. Check the “Ignore mac for client” checkbox. Then throw your laptops into a group, assign your image, and tell them all to Unicast. Then image them one by one.
Note that when you go to image them a 2nd time, it’ll be a lot easier because they will already be in the DB.
-
@EAHarvey Several programs have found no issues with the drive.
@Wayne-Workman Cannot do this right now as I only have 1 netbook in my Office but will give it ago when I can.
Anyone else have an idea why I get this error when trying to deploy an image? https://forums.fogproject.org/uploads/files/1452520756237-error.jpg
Thanks again.
